I want to use my Elecraft BL-1 1:1 balun on field day.
The balun would serve as center insulator, but the coax line plugged into it is
a phasing line.
Here is my question: Will the windings on the balun, introduced between the
antenna and the phasing line, effectively increase the length of
Yes, I removed seven of them. I dunno if I can explain how I did it, but I
will try if you still want me too! I still have the tool I used, and if you
are pateint enough and would return it, I could mail it to you, but with no
gaurantees you can pull off what I did!!!
73,
Fred - kt5x
K2 #
OK, HOW I DID IT !!!
First, I made a tool, a heat shield. I made this out of a piece of tin from an
Altoids box. I used a set of relay holes on the circuit board to mark on this
piece of tin the precise location of all ten holes with a needle. Then I put
the piece of tin on a piece of wood,
New Year's Eve is traditionally is a time to review the year past, and wax
nostalgic. For some years amateur radio ops have dusted off their straight key
and put it on the air. But what about other, perhaps more challenging antique
keys of historic and nostalgic value?
Semi-automatic keys,
Please forgive my ignorance... question about the 8R line:
What voltage is high?
In rcv, is 8R high or low?
72,
Fred
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
TNX info!
73
Fred
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Had never checked the power out for my KPA-100, so did so. Took the KAT-100
out of the chain for the test, using dummy load. Startled by the results:
band K2 KPA-100KPA-100
thru ATU no ATU
160 --- 10.7 -100 -
255 countries with the K2, DXCC on 10 through 40, 38 on 80, a dozen including
intercontinental on 160... many of them were during the sunspot peak in 2000
which does make it easier! I think W9KNI's efforts are quite a bit higher.
Mojo to all ! and 72,
Fred
KT5X
K2 # 700
aka W5YA on QRP
I enjoy copying CW up to about 60 wpm, then problems. And I can offer a theory
for why.
The mind, not the ear, has a built in echo suppressor. When the ear hears the
same sound soon again, it sends its message to the brain, but the brain
interprets it, if the time between sounds is very
Seems like everyone's radio is a little different. I have done the sidetone
mods on my K2 and the tone quality is nice. When I added the DSP a nasty
pin-prick click occurred at the MAKE of QSK keying. This is in monitoring
only, it is not on the air. This is much more pronounced with a pair
Has anyone tried wireless headfones such as these with their K2?
http://www.radioshack.com/product.asp?catalog%5Fname=CTLGproduct%5Fid=33-1219
I am curious how they handle being around a transmitting ham radio. The idea
of being able to walk into the kitchen to refill a cup of coffee without
Story of the four-leaf clover, meant to say N6WU whose name was KR and who is
(SK), accidently said N6KR in QSO and sk, not so)
SRI any confusion, consternation,
73
Fred
KT5X
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
I've never gotten so organized as to make a jig for winding toroids. Fred,
you may have talked me into it, Hi!
Ron AC7AC
__
Ron, OT, I was amazed how easy this approach makes the process. It becomes
hands free at any moment you want to stop and do something else, too.
73
FD
kt5x
aka
It is astonishing to me that the K2 with the teeny-tiny 160 mtr board can do
what it does on this band. It hears so well, and is so immune to IMD from
strong stations sometimes encountered on top-band...
Friday night I operated K2 QRP as W5YA, High Desert QRP Club.. operated only
fifty
I sort kit parts completely differently.
I group parts, and tape one lead, bunches of capacitors of the same value all
together, I scotch tape them to a piece of paper. Then I write the value and
the part numbers on the piece of paper next to them. I put the same type of
part on the same
This is the external keyer I have chosen, and very pleased with it...
http://jacksonharbor.home.att.net/ik2.htm
More features, more memory, and lower cost than anything coming close to it.
I have no financial relationship with them.
72
Fred
kt5x
___
Does anyone else notice that many CW signals these days are somewhat less
than T9. I was beginning to believe it was to do with the DSP but a tune
up the band would find another similarly strong signal singing pure.
Yes, I am currently working the WAE contest and hearing a fair number of T6
First, thank you to those who responded and taught me the difference between
these several types of diodes. Now, to share an experience, actually, several.
three times in five years have had my radio go awry on transmit, and all three
times the cause was the same; directional diodes in the
My ESD problem with the K2 and KPA followed a severe shaking over washboard
roads on a voyage to remote Chaco Canyon. The K2 was riding in a Lowes foam
surround carrying case. I can not prove, but I do not think the ESD that
zapped the directional couplers came from an antenna. It happened
These are used in the directional coupler of the K2, KPA, and KAT-100. I have
lost these to ESD more than once. Several questions;
Gary says that 1N5711's give more accurate readings than lessor diodes such as
the 1N4148... question; how much more accurate, and how critical is this
accuracy?
Why subjecting oneself to such exhaustion is fun, I don't know, but it IS !!!
first, thanks for QSO's from so many of you guys, and the many greetings and
good wishes.
W5YA, High Desert Wireless QRP Club is a small New Mexico club of a coupla OT's
dedicated to helping new comers learn and use
Yes, Gordon is producing keys again. They are very nice for sure. I had a VHS
for 15 years, but recently sold it. I bought a hand made key by Alberto
Frattini, I1QOD, for about the same price and like it better. Alberto, I
understand is the European High Speed champ and a retired machinest.
22 matches
Mail list logo