Gentlemen,
Can anyone out here EXPLAIN to me the VARIOUS FUNCTIONS/ADVANTAGES of the "USB Keyboard port" in back of our
recently modified P3 ??? About a half yr. ago we had some work down on our K3 & had installed in our P3 the
"External VGA" board for using a "BIG SCREEN" for viewing the
IT SHOULD HAVE BEEN THE "K4", then NONE of this other mundane garbage on the "Reflector"
would have CAUSED ANGST among the "Troops!!!".
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
it was the BEST WHILE LISTENING TO
“KFRC” here in the “Bay Area”!!! Now that we’re a lot older & WISER it’s
really neat to remember HOW HARD IT REALLY WAS TO GET NEW GADGETS way back WHEN
!!!
Warmest Regards,
Jim Davis-NN6EE
__
Elec
Dear OB,
Here in Concord, CA I run my “K3/P3” via a “Kyocera-140w/Sun Pwr controller+2
140amp/hr marine batteries” 24/7 and have NOT had a failure YET in 4yrs !!!
Eventhough it’s not exactly what you’d stated I’ve been able to UTILIZE
solar-power very effectively and have achieved
On Fri, 30 Jul 2010 20:31:11 -0400
W4CCS w4...@w4ccs.com wrote:
When did you order yours..?? Mine was ordered on April 15.
W4CCS
On 7/30/2010 7:06 PM, T Gahagan wrote:
Just got notice that my P3 shipped today. I don't want to cause a ruckus
but I know some of
you are on the edge of
On Sat, 31 Jul 2010 17:25:52 -0500
Michael Larson kc...@netins.net wrote:
I ordered my P3 April 15 at 9:15 AM I have had no such confirmation yet,
but am hopeful it will come soon.
KC0CF
Michael
On Sun, 25 Jul 2010 15:09:14 -0700
Brett Howard br...@livecomputers.com wrote:
Thats 25 pounds of pull to pull the metal bit out of the plastic bit...
But it should require 3-5 pounds (depending on what connector detent
style you have) of force before a mated connection separates.
~Brett
Gentlemen,
To all a hardy Thank you for those who gave me timely advice on how to fix
our RF gain problem
with our K3! Though it took a bit of rooting around it eventually worked!
By doing a RF gain re-calibrate thru the utility software program to
factory-default, it
rectified the
Lew,
There are exceptions to the rules concerning 6m FM transmissions and we're one
of them!
Here in the Eastbay area I sometimes use a local repeater on 52.900/.400
(pl:144.8hz.). I'm
located in Concord which is approximately 23 (airline) miles from the repeater
on Patterson Pass
slightly
Gentlemen,
Honestly we've never even bothered to set up our K3 for the clock-function!
Why? Don't need it!
We've got a few other time-pieces around the shack that are ALWAYS ON THE
NAT'S fanny In
particular I'm also using an ETON XM-1 SWL rcvr, though rather pricey it's
sensitivity is
Gentlemen,
A few days ago I was listening on my K3 on 20m (either mode/band segment) and
instead of the usual
S5 noise indication on my S-meter it was only (S-1) even with the preamp on!
This also occurs on
17m as well! While all the other bands show the regular/typical reading (S-5
plus or
On Tue, 9 Feb 2010 17:25:40 -0800 (PST)
ab2tc ab...@arrl.net wrote:
Absolutely hysterically funny and to the point!
Knut - AB2TC
N3PSJ-2 wrote:
Hilarious!
Ken KE3C
On Tue, Feb 9, 2010 at 6:58 PM, Mike B kw...@comcast.net wrote:
Grant Youngman wrote:
Too good!! :-)
On Tue, 12 Jan 2010 13:31:17 -0800 (PST)
Mike K2MK k...@comcast.net wrote:
A resource for those who are undecided as to whether to build their K3 or
have it factory assembled would be a viewing of N5NA's 7 minute YouTube
video.
http://www.youtube.com/watch?v=DfUMZcwtIyw
It's a
--- the forwarded message follows ---
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Gentlemen,
Will both of these units REQUIRE mods within the K3 for proper seamless
operation???
We're really jazzed about both!!! In the case of the P-3 (I know earlier next
year!)
Regards,
Jim/nn6ee
__
Elecraft mailing list
Home:
Gentlemen,
I'm experiencing an ODD rather broad noise USUALLY on 20m @ the lower end of
the band (CW) between
14.020 up to about 14.060mhz. It's sort of a mid-pitch level GROWL that
VARIES in frequency
(traveling) up and down the aforementioned frequencies, and sometimes more
noticeable in
On Tue, 17 Nov 2009 10:20:47 +
David Pratt da...@g4dmp.fsnet.co.uk wrote:
In a recent message, Brett Howard br...@livecomputers.com wrote ...
Is this still slated to be out by year end?
Yes, but I don't think anyone said which year ;-)
73
--
David G4DMP
Leeds, England, UK
--
On Thu, 15 Oct 2009 17:34:27 -0400
r miles greenacres...@charter.net wrote:
When I'm split I just push A/B. I am then listening to my Xmit Freq. I set
the bandwidth narrow
on my listening freq wider on my Xmit freq. When the DX turns it back to
the stn it;s working
I punch A/Btune
On Mon, 05 Oct 2009 13:01:54 -0400
Dan Atchison n...@aol.com wrote:
Personally, Jim, I agree with Steve.? If you've had no problems, then why
bring it up?? Let
readers be their own judge.
Dan -- N3ND
***
Dear Dan,
All that I'll say about
Courtesy of YOU TUBE!!!
Enjoy!
Jim/nn6ee
**
http://www.youtube.com/watch?v=TiVlvciPZx4NR=1feature=fvwp
__
Elecraft mailing list
Home:
On Fri, 2 Oct 2009 20:35:09 -0400
Steve Ellington n...@carolina.rr.com wrote:
This is a troll.
Steve
N4LQ
n...@carolina.rr.com
- Original Message - From: JIM DAVIS nn...@astound.net
To: elecraft@mailman.qth.net
Sent: Wednesday, September 30, 2009 7:20 PM
Subject: [Elecraft
Question!
I've noticed a lot of angst from other K3 customers concerning front-panel
mounted switches and
their habit of FAILING as of late! Is this a quirk of manufacturing
processes that Elecraft
LET slip by OR is it only random and only a few units sent out that were
affected???
On Sun, 20 Sep 2009 14:04:07 -0400 (EDT)
Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com wrote:
It'd be cheaper to unsubscribe from this mailing list.
Or just complain to Elecraft, instead of the whole list.
73, doug
Date: Sun, 20 Sep 2009 18:53:17 +0100
From: Ian Maude
On Sat, 15 Aug 2009 18:20:55 -0700
Rick Tavan N6XI rta...@gmail.com wrote:
Hmm. We may have a religious issue here. I was delighted to see the P3
positioned on the left BECAUSE I am right-handed. I send CW with my right
hand and adjust the primary radio with my left hand. Stuff located on the
If this up coming product is as GOOD as the K3 has been (ser.2406) then
I'll stand in line to
purchase ONEPRONTO!
Whoa Nellie!
Jim/nn6ee
**
Sent: Tue, 11 Aug 2009 10:40:53
This idea was put forth by Don-W6JL (Fallbrook, CA)!!!
His quote: I have tested many noise blankers in modern rigs, on the air.
Both the I.F. noise
gates and the DSP-based noise reducers. Not one works the way I feel it
should. I think you
need a separate noise receiver, independent
On Thu, 30 Jul 2009 09:30:31 -0700 (PDT)
Wes Stewart n...@yahoo.com wrote:
Simple, now that most of the issues surrounding the K3 have been addressed
and FIXED
Which ones? None that I've demonstrated to them have been.
Wes
Gentlemen,
I'd say that the powers-to-be are now working on the latest and greatest K4!
Why would they do that you-ask?
Simple, now that most of the issues surrounding the K3 have been addressed and
FIXED it would
stand to logical reasoning that
by virtue of the postings on the reflector
''I have begun reading a bit more about these so-called noctilucent
clouds and the role they might play in sporadic-E. Fascinating
stuff. First observed after the huge Krakatoa volcanic eruption in
1883 in present-day Indonesia, it was originally thought they were
caused by volcanic debris spewed
Gentlemen,
Is there any way to manipulate the transmitted audio when on FM using the K3???
Nothing in the
manual
suggests that it's even remotely possible, while of course when on SSB or AM it
can be
accomplished
using either TX-EQ or ESSB!
I ask this question because I work a club-rptr on
Hey guys I ran across the site on Facebook and it's really neat!!!
Though the program is in Italian you get the IDEA!!!
Knowledge and Friendship thru TELECOMMUNICATIONS!
JIM/nn6ee
***
Wayne,
Thanks for putting up with all of everybody's sometimes great ideas and then
some others
who always seem to push you and Elecraft more towards the ABYSS!!! Your
crew did create
a Great Box in the guise of the K3, but it'll be a never ending struggle
because there's
a lot of guys out
Gentlemen,
How accurate is the built-in watt meter indicator in the K3???
I'm asking because when I've used a supposed;y accurate Bird 43 while
measuring the K3's various
outputs on the various HF bands there seems to be a slight discrepitancy
between what the K3 is
showing and what's
On Wed, 27 May 2009 21:19:20 -0400
Jerome S xyzzy@gmail.com wrote:
Hello all just loving the new K3, All is well except one thing. I
don't seem to have any way to mute the built in speaker. When I plug
in phones either in the front or rear the speaker does not mute. I
have set
On Tue, 26 May 2009 20:13:39 -0700 (PDT)
Jim - W6VAR w6...@comcast.net wrote:
I just tried listening to a 6M FM net on my K3. I set SQ SUB to Sub Pot and
noticed that the squelch opens when the sub rf/sql is adjusted full
clockwise. Backing of slightly closes the squelch. Anyone else
On Mon, 11 May 2009 12:11:06 -0500
Bill Maddock n4z...@yahoo.com wrote:
I would like to find or build an external speaker for my K3. I want something
that sounds
good,will match closely and is realitively efficent like 92 db @ 1 watt/meter!
-What is everyone
using?
Thanks and 73,
Bill
On Mon, 04 May 2009 13:23:40 -0700
Jim Brown j...@audiosystemsgroup.com wrote:
Crew,
Some feel that my posts are sometimes harshly worded. Perhaps they
are. But it seems to me that someone with a General Class ham
license, and especilly someone with an Extra Class ticket, ought to
have
On Tue, 5 May 2009 14:50:53 -0700
wayne burdick n...@elecraft.com wrote:
Mike Harris wrote:
One nasty winter's day I might just drag out the mod kit again. How
do you
know which end is which on the SMD LED?
DMM :)
Actually, I think the instructions cover this.
73,
Wayne
---
With alot of the newer rigs with noise-blankers it's always been the case
whereby
when they are activated there's always a small amount of distortion that's
injected
into the audio we hear, either via our speaker or from the headphones!
So what I'm asking is it possible (eventually) that
Eric, It was a pleasure meeting you personally at VISALIA IDXConv. and maybe that's why
somethings might slip by you if you're always trying to promote the product and make sales
as well!
As a younger guy I burnt the candle like that just for survival too!
Regards,
Jim/nn6ee
Gentlemen,
Ever since I purchased my own K3 (circa Dec.2008) the revisions that have
been posted on
Elecraft-Website have operated as/per claimed specs. But yet out here after
almost being
overwhelmed by
complaints from many users that for whatever reason, FOR THEM THEY DON'T WORK!
Why is it
Right on Gary! I concur!
But still what has to be taken into consideration by the Powers-to-be is that
not everybody
is computer savvy (myself included!) But the overall performance is 2nd TO
NONE!!!
*
Warmest
Our own K3 (s/n 2406) has been flying FB since it was ordered/built/ and sent
out in Dec. 2008!
Maybe
everybody are asking TOO MUCH of the Elecraft Guys? Our latest rev. dwnload
was #3.06, but with
Beta there are always problems, so most of us SHOULD WAIT until the gliches
are worked through!
On Mon, 9 Mar 2009 16:48:59 -0400
KC2UEE kc2...@gmail.com wrote:
Hi gang,
Just so you all know, I am in the process of learning CW. Not because I
have too as someone else mentioned, but because I want to learn something
that I feel is an integral part of the amateur experience.
For some reason nothing came about OUR query about the internal clock within
the
K3!!!
Can someone please come up with something that is coherent and usable???
How to set the hour/minute/sec to coincide with WWV???
Jim/nn6ee
__
I'd like to SET the internal clock of the K3 to be somewhere near accurate, but
where is that
EXPLAINED IN THE K3 manual?
Jim/nn6ee
PS,
Even Elecraft needs to EXPLAIN more in the manuals because not ALL OF US ARE
IT GENIUSES!!!
Jim/nn6ee
Wayne,
Our niche in this fabulous hobby of ours is chasing DX (new entities-DXCC) and
don't really
care about QRP per/se as our radio location is marginal at best here in ant.
un-friendly
Concord, Ca. so most of the stuff that I work is worked using 100w., but if
band conditions
dictate
Dave Bob,
Both of you guys have very valid points, there's no doubt about that BUT,
what's really key or the
real crux of the debate in our humble opinion would be Do you have the
PATIENCE? and being the
honest individual that I pride myself on being, in all honesty I personally
DON'T! :-)
To Mike and all,
We're SOO diverse of a group that whatever anybody does, as long as they're
licensed and keep
their operations within FCC Part 97 they CAN DO WHATEVER THEY WANT!
Thanks for the internet bandwidth!
Jim/nn6ee
__
dr. Ed,
As far as I understand the K3 is that that function was built into the rig to keep it from getting
fried
by a errant power surge to begin with. I don't think that there's any settings
within the menus
to accomplish that!!! Again it's BUILT IN if I'm correct! If not somebody
To the Elecraft Crew,
Many thanks for building into the K3 to sense when the AC power is not there
and shut-off
completely!
I say this because earlier this morning here locally there was a PGE power
outage. Initially the
juice went off and then just a few mil-secs the power tried to come
On Mon, 23 Feb 2009 14:24:16 -0800
wayne burdick n...@elecraft.com wrote:
NAQCC wrote:
New Years 2009 may have come and gone but its never too late to
resolve to help preserve and encourage CW activity across our amateur
bands. To celebrate the new year, come and join the NAQCC (North
--- the forwarded message follows ---
---BeginMessage---
On Fri, 20 Feb 2009 16:18:07 +
David Ferrington, M0XDF m0...@alphadene.co.uk wrote:
sometime in March - not vacate I think, but we switch - Amateur Radio
becomes primary user and Broadcast secondary. I think anyway.
73 de
Did not anybody get MY EXPLANATION about 40m SW broadcasters earlier???
OH WELL! Sometimes offering information out here is a WASTE OF TIME!!!
Jim/nn6ee
---BeginMessage---
On Fri, 20 Feb 2009 16:18:07 +, you wrote:
sometime in March - not vacate I think, but we switch -
Amateur
On Sun, 15 Feb 2009 12:56:47 -0700
W0MU Mike Fatchett w...@w0mu.com wrote:
If there is a way to do this already please excuse the request.
Radio without 2nd receiver
When working split it would be nice to display your transmit frequency. Say
you have 21.295 for VFO A receiving K5D and
On Fri, 13 Feb 2009 02:04:00 -0800
hans-christ...@gmx.at wrote:
Jim,
I read your comments about the W2ENY headphones on the Elecraft reflector and
I´ve got a
question:
It´s not easy to find good headphones for the K3, because of the
impedance(same story with the
K2). I´ve tried
On Wed, 11 Feb 2009 18:28:28 -0500
James Sarte kc2...@gmail.com wrote:
Dear all,
I just wanted to say thank you to everyone on the reflector list that has
taken the time to answer my questions. It's this level of support and
interaction that I really appreciate and enjoy. This
BOY!!! I wish I'd heard about this K3 offer earlier as I'd purchased the Heil Pro-Set (IC)
to the tune of $$$150.00! from Elecraft!!
Darn!!!
Jim/nn6ee
---BeginMessage---
At the Monday NCCC meeting I recommended a boomset that is sold by W2ENY I
have received excellent on the
On Wed, 11 Feb 2009 19:16:36 -0700
W0MU Mike Fatchett w...@w0mu.com wrote:
Ok I read the manual and I have been unable to program the m1-m4 keys or the
0-9 keys. I can program a normal memory just fine.
Is there a menu setting that I am missing or did I have to do something in
the K3
I'm just wondering why the crew at Elecraft did'nt include a USB port on the
rear of the rig to
facilitate plugging in a computer keyboard when one was using either RTTY or
PSK??? The
additional
cost could'nt be that much more adding something like that to the K3's already
fantastic
On Sat, 7 Feb 2009 02:38:36 -0800 (PST)
AD6XY m.j.wil...@rl.ac.uk wrote:
It is a common misconception that Bird Thrulines are a always accurate.
They are good when operated into a matched load and when the signal does not
have a high harmonic content. If there is reflected power you need
Gentlemen,
As measured on a BIRD TRU-LINE (Mod43) with a 250w. slug our RF out from our
K3 is:
80m: 180w.
40m: 150w.
WHY???
I ask this because our WATT METER is a accurate device and no one can dispute
its accuracy!!!
Regards,
Jim/nn6ee
From a Greenhorn,
What I want to do is get a frequency (50.125mhz) into the quick memory, which I
suppose is M1-M4
circular config on the right-hand side of the rig like when using CW on any
particular band and
recording a CW macro-msg. Some quick method of getting that particular freq.
into
Gentlemen,
A few days ago I was messing around with the K3 (as usual) and having set the
AF gain
control at about 11 O'clock with the AGC set for fast I wondered what would the
audio
results be if I switched OFF the AGC with that particular setting.
BIG MISTAKE! When the AGC is OFF the
for the K2 and K3, do not.
73,
Don W3FPR
JIM DAVIS wrote:
Gentlemen,
A few days ago I was messing around with the K3 (as usual) and having set
the AF gain
control at about 11 O'clock with the AGC set for fast I wondered what would
the audio
results be if I switched OFF the AGC
On Tue, 27 Jan 2009 14:43:04 -0600
Grant Youngman n...@tx.rr.com wrote:
You live a sheltered life! The TenTec Orion allowed the user to
shutoff the AGC @ will
and the resulting big difference in audio was NOT THERE! At best
maybe a s-unit or so
but nothing approaching what I had
BRAVO IAN!!!
You were very clear/concise/ knowledgeable in your summation of the K3 6m.
quandry!!!
MANY THANKS!!!
Sometimes a educated explanation is better than a visceral response! :-)))
Regards,
Jim/nn6ee
S/N 2406
___
Elecraft mailing list
On Sun, 25 Jan 2009 12:34:03 -0500
Phil LaMarche plama...@verizon.net wrote:
I purchased a used FT 100 just to monitor 6 while using the other bands with
the K3. Today there is a great opening. Signals are screaming from the FT
100 and hardly heard on the K3 using an antenna switch. Guess
On Sat, 24 Jan 2009 18:43:13 -0800 (PST)
Ralph Tyrrell w...@yahoo.com wrote:
In the last two months I have had many CW QSOs with Extra Class Amateurs
where I have had to
slow down, somtimes to 5 WPM. Listen from 7113 to 7120 kHz also 3550 to 3555
kHz.
It has given me a thirll to work
Jay,
Maybe you're blessed or you don't think that Elecraft can do no wrong! What
I and others are
saying is that in OUR SITUATIONS the 6mtr. section sucks! That's why we're
procuring the 6m.
PREAMP, in that we still have faith in the K3 overall!!!
Jim/nn6ee
S/N 2406 (even this high # 6m.
On Sun, 25 Jan 2009 22:54:16 -
Ken Kopp k...@rfwave.net wrote:
Jim,
I don't think anyone's aimed anything at you ... at all.
Some (of us) are just saying that we have found no
problem with our K3's on 6M ... nothing more.
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
On Sun, 25 Jan 2009 22:58:18 -
Ken Kopp k...@rfwave.net wrote:
Jim,
Using caps in a message is taken as shouting.
Your posts sound/read like bitching or anger.
FWIW
73! Ken
***
i guess that you
On Sat, 24 Jan 2009 14:45:52 -0800
k7cr k...@blarg.net wrote:
A K3 -QSO Party sounds like fun ! The hard part will be to find a weekend
that is not inconflict with other events. Exchange could be simply Name and
K3 Serial Number - Assuming that Elecraft has a list of names to match most
On Fri, 23 Jan 2009 12:18:44 -0500
Benson b...@fastmail.us wrote:
I would like to show my support of Elecraft and my enthusiam about my new K3
by wearing a high
quality screen-printed tee shirt.
I would wear one to all of my club meetings as well as Field Day which will
be here before
On Thu, 22 Jan 2009 15:04:11 -0600
Terry Schieler terry.schie...@wirelessusa.com wrote:
Wayne Burdick wrote:
Humans use lexicographical and semantic clues to fill in dropped CW
characters, and computers can do the same. But this goes way beyond the
simple signal processing used in,
On Fri, 9 Jan 2009 11:57:11 -0600
Bill Johnson b...@creeksidecomputing.com wrote:
Tony,
Yes, the 600 has a standby switch. When changing bands and freqs frequently
it would be useful not to go through a bunch of manual switching. Also
consider that some of us may not have the amp in
On Fri, 09 Jan 2009 14:58:52 -0700
David Gilbert xda...@cis-broadband.com wrote:
Did you get a reduced rate on exclamation marks or something? No need to
shout every
sentence
Dave AB7E
JIM DAVIS wrote:
HMMM!
For some of the features that are not well apparent
On Thu, 8 Jan 2009 19:03:03 -0300
Mike Harris mike.har...@horizon.co.fk wrote:
G'day Uli,
KEY OUT switches on tune on #345. That is how I tune my Acom 1000.
Regards,
Mike VP8NO
- Original Message -
From: Ulrich Quandt ulrich.qua...@online.de
To: elecraft@mailman.qth.net
--- the forwarded message follows ---
---BeginMessage---
On Thu, 8 Jan 2009 17:17:58 -0800
Dick Dievendorff die...@comcast.net wrote:
K3 Utility Version 1.2.1.6 for Windows, Mac OS/X and Linux, is now available
on the Elecraft web site at http://www.elecraft.com/K3/k3_software.htm
This
Johnny,Radio-manufacturers is that they TOO outsource NOW alot of the
component procurment
as well as assembly (AT THE CHEAPEST PRICES POSSIBLE)! So really it's not fair to say that ONLY
ELECRAFT may use El-Cheapo
components!!!
My K3 is only two weeks old right now and I, like everybody else
On Wed, 31 Dec 2008 08:55:37 -0800
Bob Tellefsen n...@comcast.net wrote:
In CW mode plug the FS into the KEY jack.
It will look like a key and key the TX as long
as you push the FS down.
73, Bob N6WG
- Original Message - From: JIM DAVIS nn...@astound.net
To: elecraft@mailman.qth.net
Gentlemen,
This I'm sure has been thought about by many individuals for many years
especially myself.
Do you think that by cycling a rig (turning it off and on) for years has
anything to do with it's
LIFE, especially since with that process the internal components would be subject to current
steven.zabarn...@notes.udayton.edu wrote:
During the past week I have noticed my K3 drifting during the first 20
seconds after power up. I hadn’t noticed this previously in my three month
old K3 (SN 1672), so I’m wondering if this is normal? With winter here it
is colder in my basement shack
On Tue, 30 Dec 2008 15:16:41 -0800 (PST)
Julian, G4ILO julian.g4...@gmail.com wrote:
JIM DAVIS-11 wrote:
It seems that in our hobby why in the heck would any individual really
need a TCXO or whatever
in the first place? As most ovens are only switched on when the rig is
instead of being
Is there any way of using a foot switch to activate a constant tone for either
tuning a external
antenna tuner or tuning up a linear amp instead of PUSHING IN THE XMIT/TUNE
BUTTON???
I've got a Heil Foot-switch and headset but even when in CW mode depressing the
FS only activates
the xmit led
On Sun, 28 Dec 2008 21:48:42 -
Ken Kopp k...@rfwave.net wrote:
Welcome to the reflector, Jim!
LOTS of knowledge and help available here.
I'll be the first to ask ... what's your K3's S/N? (:-))
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
Gentlemen,
I just recently bought a new K3 and all that I've got to say about it presently is that it's a
FABULOUS MACHINE!!! Eventhough for over 7yrs. I'd been an owner of the TenTec Orion the K3
definitely has the EDGE as far as overall performance is concerned.
The learning-curve for the
On Sun, 1 Jun 2008 00:03:27 -0400
Ian Stirling [EMAIL PROTECTED] wrote:
I don't have a K3 and I will not order one until it is a
stable product and on-the-shelf for immediate delivery.
My homebrew 10 MHz CW transceiver, EA12, IC-735 and K2 are
working fine.
.. just got my list password, that I
On Wed, 21 May 2008 13:38:00 -0600
Art [EMAIL PROTECTED] wrote:
Some folks have an inflated sense of their own importance. Elecraft is shipping every K3 they
can make, and making them as fast as they have people available.
I'd be very surprised if they're currently pretty nervous about any
On Wed, 21 May 2008 14:44:30 -0700
John K7SVV [EMAIL PROTECTED] wrote:
It sounds like the natives are getting restless again.
John[K7SVV]
- Original Message - From: JIM DAVIS [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Tuesday, May 20, 2008 3:06 PM
Subject: [Elecraft
I'm very interested in purchasing one of your NEW K3s but what I have a hard time understanding is
about the production lag-time (4mo. now?) If you guys KNOW that you've got a winner then WHY
NOT RAMP UP PRODUCTION now instead of having everybody wait??? Also, if the staff that you have
that
typical
noise level here is S-9+ without it!!! So short of my having to MOVE somewhere
else (not feasible
at this time!!!) has anyone COMPARED the i.f noise blankers of both the K3 and
the TT Orion
yet???
Many thanks,
Jim Davis/nn6ee
Newbie on the reflector
Many thanks Wayne for your reply and I will ask Lisa about it as well, but there has to be others
out here
as well that have done similar comparisons!
Jim/nn6ee
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
93 matches
Mail list logo