zero beat, so it's very broad.
Does this make any sense? Thanks for any insight.
Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Is the K-Pod's data cable a standard data cable? I'd like to use one that
is a bit longer than the stock cable so am wondering if I can just
substitute a standard one.
Jim N7US
__
Elecraft mailing list
Home: http
I apologize if this has been asked before.
Is the soundcard/CODEC in the K4 the same as in the K3S?
Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Should the P3 center frequency and span be remembered when changing bands?
Rephrasing, can they be remembered when changing bands?
Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
easier to get the correct TX
audio level.
Jim N7US
-Original Message-
What is the Line gain on the radio?
My values:
For transmit:
Computer SPKR level @ 30 or -18 dB
WSJT-X PWR at mid scale, thus Transmit Digital Gain is -17.3 dB
K3S Line gain at 25.
For receive:
Microphone
I changed the subject.
Jim N7US
-Original Message-
I installed the 64-bit version today. I had to increase the "Pwr" slider to
the max and tweak the Windows audio levels on RX and TX for my K3S.
Jim N7US
-Original Message-
I had 2.0.1 in my computer and had
I installed the 64-bit version today. I had to increase the "Pwr" slider to
the max and tweak the Windows audio levels on RX and TX for my K3S.
Jim N7US
-Original Message-
I had 2.0.1 in my computer and had been using it since it's general release.
Works well, no issues.
Win4K3Suite macros will work with the K3, P3, and KPA500/1500, even in the same
macro, I think.
Jim N7US
-Original Message-
Do you also have access to the P3 controls remotely via the RS-232 port? My P3
loses its span end-point settings if I change the band via CAT commands and I
I forgot to correct the subject. I updated to V. 1903.
Jim N7US
-Original Message-
Thanks for the suggestions. I found it hiding in All
Settings-->System-->Sound-->Input (or right click on the speaker icon-->Open
sound Settings), where I was able to choose my
n the
MMTTY configuration and DXLab's WinWarbler.
Jim N7US
-Original Message-
The K3S line out is missing.
Jim N7US
From: Ed W0YK
Sent: Thursday, June 13, 4:42 PM
Subject: Re: [Elecraft] K3S soundcard after Windows 1809 update
To: Jim N7US, Elecraft Reflector
It just
Oops - I meant Windows 10 V. 1903.
Jim N7US
From: Jim N7US
Sent: Thursday, June 13, 2019 14:35
To: Elecraft Reflector (elecraft@mailman.qth.net)
Subject: K3S soundcard after Windows 1809 update
After the update to Windows 1809, Windows isn't seeing the line-out CODEC of
my K3S
After the update to Windows 1809, Windows isn't seeing the line-out CODEC of
my K3S. It recognizes the line-in one just fine. Any suggestions would be
appreciated. Thanks.
Jim N7US
__
Elecraft mailing list
Home: http
I've used band decoders from Top Ten Devices for many years.
https://toptendevices.com/products/band-aide-band-decoder/
Jim N7US
> On Jun 6, 2019, at 3:52 PM, David F. Reed wrote:
>
> In planning my next station, I have not found one item I would like to
> add...
and then a
K3S) since being first licensed in 1964.
Jim N7US
-Original Message-
Jim,
You apparently had some glitch in the computer to K3S communications during the
process. Go to the Help file in K3 Utility and look at the instructions to
"Force a Firmware Download" and follow
.
I've never had a problem before with a F/W update.
Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
That's nicer than my solution, which was to set the back of the amplifier on
a temporary spacer (a thin book?) and remove the spacer after tightening the
wing nut and plugging in the power cord.
Jim N7US
-Original Message-
I usually struggle to reinstall the wing nut on the KPA1500
configuration items from the K3 programmer's
manual.
Jim N7US
-Original Message-
Well, wait long enough or take to long thinking about it and someone who
really knows the answer I gave will pop in and say "Yes, you can do that"
before you do. HI Thanks Jim.
I was pretty sure w
VA2FSQ's Win4K3Suite can do that. https://va2fsq.com/
Jim N7US
-Original Message-
Hi Folks,
I have been trying to find a way to "dump" or list out all the settings in
my K3s for the MENU options as well as the settings for the CONFIG options
without going through the f
could
pick up from where I left off when I was a college student in IA when the
rule changed in 1977.
Jim N7US
-Original Message-
Before being cut off by Eric, I want to point out that there was a 50 mile
radius for DXCC also prior to the early or mid-80s. I can't remember when
the ARRL
I see power output with V. 1.19.2.21.
Jim N7US
-Original Message-
The new Beta version seems to have lost the output wattage display.I am not
a fan of the remote version so now I have to rely on an external wattmeter
for output numbers.My amp is located away from my operating
I'd be interested in seeing a similar comparison of the K3S to the
FlexRadio.
Jim N7US
-Original Message-
My two cents:
> Rob wrote:
>
> I would count the order differently if numbering is of interest. The
radio at #1 cannot be reproduced with current software.
Clarified
The KPA1500's Ethernet port is required to use Larry's program.
I use WiFi to connect my shack computer to the internet and LAN and USB between
the computer and KPA1500.
Has anyone connected their KPA1500 to a WiFi-connected computer using Ethernet
between the amplifier and the computer?
Jim
Got it. I had only looked under Elecraft. Thanks!
73, Jim N7US
-Original Message-
Hi Jim
Look under Elecraft or KPA500.
My KPA500 program is there in add/remove.
Mike va3mw
On Tue, Aug 14, 2018 at 8:55 AM, Jim N7US wrote:
> How can I uninstall the KPA500 and KAT500 Rem
How can I uninstall the KPA500 and KAT500 Remote programs? I don't see them
listed in Device Manager's Programs and Features.
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
or will turn the radio off.
Thanks very much for the help.
73, Jim N7US
-Original Message-
Jim,
What is the firmware level of your K3/K3S?
If it is 5.33 or later, there is a SAFE/UNSAFE mode for PTT-Key. An excerpt
from the 5.33 Firmware Release Notes is below:
* PTT/KEY USE WITH THE USB
Lyle,
That's what I was looking for. I went to the hwnotes.rtf file to see the
formatting.
I think it was in USB SAFE mode but will test it. Thanks, Lyle.
73, Jim N7US
-Original Message-
In cases like this, please check the firmware release notes for the radio. The
info is often
I've lost track of the (menu?) setting that prevents the K3 or K3S from
going into TX when the attached computer is powered on. The radio goes into
TX two or three times when the computer starts.
73, Jim N7US
__
Elecraft mailing
is to be on the lookout for a 73CNC VFO
A knob for your K-Pod.
73, Jim N7US
-Original Message-
Love the Kpod. Even though I was very comfy with the RIT even with the tiny
knob, I got very used to it. But during a contest it required reaching across
the keyboardand taking my right hand away
I had it about a week ago on 15M and reported it to Elecraft. It hasn't
recurred.
73, Jim N7US
-Original Message-
First attempt to put amp on 6m. No problem with antennas our output but
display disappears after about a minute of calling cq on cw. At first only
half the screen
Sorry, I forgot that I'm asking about the KPA1500.
73, Jim N7US
From: Jim N7US
Sent: Saturday, June 2, 2018 21:21
To: Elecraft Reflector (elecraft@mailman.qth.net)
Subject: Fan speed on meter?
Maybe I've overlooked it, but I don't see a meter display option that shows
the current
Maybe I've overlooked it, but I don't see a meter display option that shows
the current fan speed. Is there one?
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
from the noise, making it difficult to see the signals.
Can someone enlighten me as to why the displays are so different?
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I just got mine today (S/N 154, ordered 8/25). It does have a tilt stand,
which makes the bottom the same height as the K3S.
73, Jim N7US
-Original Message-
Getting closer to placing an order for a KPA-1500 -- -- electrician is, at
last, coming Monday to see if or how 240 VAC can
up the package at a
UPS location.
Check it out at
https://www.ups.com/us/en/services/tracking/mychoice.page .
73, Jim N7US
-Original Message-
There is an APP that allows you to specify when you want your package delivered
by UPS. Also, you might have been able to go to the UPS
I had the same problem, plus my output on 160 and 80 was low.
I just had the radio back for warranty service, and they turned it around in
just a few days. I was very pleased.
73, Jim N7US
-Original Message-
From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.
I placed my order with a $1000 deposit on 8/31. I expect them to put those who
fully prepaid for their amplifiers first and those who put a $3000 deposit next
in line.
73, Jim N7US
-Original Message-
KPA1500 S/N 45 arrived at my Utah qth yesterday (Tuesday March 6) after
shipping
Morgan Manufacturing, which, I've heard, was the contract assembly company for
ICE, is also selling some of ICE's product line.
http://www.morganmfg.us/
73, Jim N7US
-Original Message-
In my experience, they fail shorted, so it's pretty obvious. Although the app
notes for both
Buck,
See #4 on page 16 of the KPA500 manual.
73, Jim N7US
-Original Message-
Someone please help me out because I can't find the answer.
K3s and KPA500 - I know there is a setting so the K3 will know the amp is in
OPER state and automatically reduce the drive to 25 or so watts
/Elecraft_K3/files/K3_EZ/
The Zip files are each about 7MB.
73, Jim N7US
-Original Message-
Back when I last owned a K3 (2009?), I had a piece of software that would,
among other things plot the SWR of the antenna attached to the radio.
Now that I've picked up K3, I'd love to find
And my old, but still functioning with a new battery, APC Back-UPS Office,
500VA/325W UPS is also certified Class B. It has a "stepped approximation
to a sine wave."
73, Jim N7US
-Original Message-
I forgot to add that the manual says it produces a sine wave.
73,
It's still working fine for me with the latest Windows 10 update. I closed
DXLab's Commander before opening Frequency Memory Editor.
73, Jim N7US
-Original Message-
Friends,
I have been enjoying the Elecraft Frequency Memory Editor for some time.
Yesterday it would not open from
)
and to 14 for digital mode TX (playback).
Maybe I'm confused or misunderstanding the settings or maybe I missed a step
in setting up the radio.
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
automatically goes back to 110W or whatever.
I've never used it on 5 MHz.
73, Jim N7US
-Original Message-
I was chatting last night with a friend in Canada and we were discussing the
new KPA1500. He asked if the amp will work on 30m without modification. Wayne?
73,
Gary K9GS
That switch is rated at 2500W PEP but only 1000W CW. Has anyone used them
at 1500W CW or RTTY?
73, Jim N7US
-Original Message-
Let's add some real numbers.
I have a mechanical A/B switch DIAWA Model CS-201. Fairly inexpensive.
Internally, it has a cavity design to provide isolation
I use a Bluetooth version with my Samsung Galaxy 5 phone, and I like it but
I'm not a touch typist. It was only $13 on Amazon. I would call it
lightweight; some might call it flimsy.
73, Jim N7US
-Original Message-
I used several different keyboards, including two from Logitech
I always use VOX, directional microphones, and headphones. I can't imagine
depressing a footswitch every time I transmit. I wouldn't want to tie up
one hand for a PTT switch in a contest either.
73, Jim N7US
-Original Message-
Not a direct answer to your question, but I use a foot
I created one, copying from the manual with Eric permission. It hasn't been
updated to reflect additions since the manual was prepared. I uploaded it
to the Elecraft_K3 Yahoo Group Files,
https://groups.yahoo.com/neo/groups/Elecraft_K3/files and it's still there.
73, Jim N7US
-Original
that rule at the top of my Outlook rules so it's processed on
incoming emails first.
73, Jim N7US
-Original Message-
George,
Yes, I believe there is a 'better way'. It takes 3 steps.
1) Change your subscription to individual emails
2) In your email client create a folder named
I've been a delighted used of the DXLab Suite for several years. It's free
and always will be.
See http://www.dxlabsuite.com/ and
http://www.dxlabsuite.com/differentiators.htm .
73, Jim N7US
-Original Message-
Well, I'm not a Lawyer, but I did sleep at a Comfort Inn once
Unlike Yaesu radios I've had, I've never had to change the polarity of my K3
or any program, including MMTTY, to reverse for FSK (FSK D in the K3).
73, Jim N7US
-Original Message-
Robert,
that's wrong. Using push buttons/memories from the K3 frontpanel all the
time on FSK-D if I just
Have you looked at S Meter Lite Software?
http://www.seed-solutions.com/gregordy/Software/SMeterLite.htm
I've used it with a 2nd CAT port in microHAM Router, which I use with my
microKEYER II.
73, Jim N7US
-Original Message-
Alan,
The only complaint that I have about my K3s
to send RTTY is a novelty or maybe appropriate if it's the only
way to work a needed DXpedition, but my personal wish is that it wouldn't be
used in RTTY contests.
73, Jim N7US
-Original Message-
The prosign works but it seems to be very sensitive to proper cw timing. I have
found
You can do that with the logging programs that I use: DXLab's WinWarbler,
N1MM, N1MM+, and Writelog.
73, Jim N7US
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug
Turnbull
Sent: November 28, 2014 14:45
To: k...@arrl.net; elecraft
You're probably thinking of K3_EZ. I believe the developer is now a SK. I
think the last version had a bug, but I have the last three versions in my
Google Drive:
https://drive.google.com/folderview?id=0B-V-5Vmska0HS2RicDA3TTBRRlUusp=shar
ing
73, Jim N7US
-Original Message
Here's a shorter link: http://tinyurl.com/mr4pe4q
73, Jim N7US
-Original Message-
You're probably thinking of K3_EZ. I believe the developer is now a SK. I
think the last version had a bug, but I have the last three versions in my
Google Drive:
https://drive.google.com/folderview
I couldn't get the TX/RX equalizer tab to work in the most recent version,
but it does in the earlier ones.
73, Jim N7US
-Original Message-
Thanks for the help. I believe it was K3_EZ that was the software. I have
downloaded it from one of the provided links.
73,
Joel - W4JBB
On 10
on the Xcvr_Control tab.
73, Jim N7US
-Original Message-
For those who may have missed this when I first described it--
* * *
In a recent discussion about SPLIT, many proposals were made (too many :)
Others argued for no change.
With this in mind, we've created a new switch macro feature
I connected an A/B switchbox to switch the radio between the MKII and a
serial port on the computer (or an Edgeport US/serial box). It has been
easy to switch the K3/P3 to the serial port for firmware updates.
73, Jim N7US
-Original Message-
Every microHAM Users Manual includes
turn on
the K3 with the front panel switch after that.
73, Jim N7US
-Original Message-
I was astounded when I read the caution in the KAT500 manual saying to
always power it before the K3. Strange indeed.
Wes N7WS
On 8/10/2014 2:42 PM, Gary Ferdinand wrote:
Thanks Fred and Steve
that when I
want to change microphones.
73, Jim N7US
-Original Message-
Fred:
I wrote a couple of K3 macros to test the technique:
To set all Rx EQ flat:
MN008;SWT53;MN255;
To set the bottom two bands down 8 dB:
MN008;SWT53;SWT11;DN;DN;DN;DN;DN;DN;DN;DN;SWT12;DN;DN;DN;DN;DN;DN;DN;DN
Cary,
I think it will work as you want if you use the small interrupter between
the end of the cable from the K3 where it attaches to the KPA500.
73, Jim N7US
-Original Message-
Elecraft Reflector participants:
If any of y'all use the N8LP tuning relay w/ your K3 and KPA500, I
, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
I would like to echo Jim's request. I have the SVGA in my P3, and it's
really nice, but I don't like losing the VFO B readout when I'm decoding
RTTY. It makes no sense to have a few characters being decoded on the K3
when hundreds of characters can be on the SVGA monitor.
73, Jim N7US
I understand that the K3 is doing the decoding, but does that mean that it
must be presented in the VFO B area?
73, Jim N7US
-Original Message-
The P3 SVGA doesn't do CW, RTTY, or PSK31 decoding. The K3 does the
decoding and presents it in the VFO B area. A copy is available through
PF1 even if I
don't have DXLab running.
73, Jim N7US
-Original Message-
I need a toggle style macro to mute/unmute the RX audio on my K3.
When I get a phone call or someone comes in the radio room it is often
necessary that I turn the audio down on the K3. Currently I use a button
problem that is permanent. I
don't know if staring at computer monitors for the last 33 years (accountant
and ham) or bicycling was responsible, but I think this subject is very
relevant.
73, Jim N7US
-Original Message-
I must also concur with Dale, et al. I also have a set of glasses I had
I experienced that with polycarbonate lenses but not with high quality,
high-index plastic ones.
73, Jim N7US
-Original Message-
I tried progressive lenses three times, and each one ended in frustration,
because the reading area is limited to a circular bull's eye that makes
head
deals email, which you can
sign up for at
http://www.frys.com/deals
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
because I have used it with a corded USB keyboard.
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
it sitting on my 87A backup amplifier.
Thanks for your help.
73, Jim N7US
-Original Message-
Hi Jim,
The P3/SVGA sees the K360 keyboard as simply a 'keyboard' and doesn't know
about pairing.Have you tried removing and replacing the batteries in the
keyboard yet? Looking at mine
BTW, two days ago it was $4 cheaper and shipped free with Amazon Prime!
73, Jim N7US
-Original Message-
Hi Paul,
I moved the Unifying Receiver from the SVGA and connected it to a computer
that was new to any Logitech receiver. The Logitech program showed the
receiver was still
, is the on/off switch, which I use to prevent the (four!) cats from
sending gibberish when they walk across it.
Thanks again, Paul.
73, Jim N7US
-Original Message-
Hi Jim,
The P3/SVGA sees the K360 keyboard as simply a 'keyboard' and doesn't know
about pairing.Have you tried removing
I leave my headphones plugged into the rear jack and turn the speakers on
and off with a macro (actually a user-defined sequence in DXLab's
Commander), so no wear and tear on the jack.
73, Jim N7US
-Original Message-
John,
While replacing the headphone jack might prove difficult, you
as 50 text messages. It can also
send text in CW, RTTY, or PSK31. I don't understand why, but the
transmitted RTTY sounds peculiar on the monitor.
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
/files/
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
any of the frills of the larger keyboards but has a full-size layout and
full-motion keys. It has LEDs for Num Lock and the others.
I haven't found a current list of the SVGA menu descriptions, maybe because
they are self-explanatory. Is that available?
73, Jim N7US
.
The question, of course, is what keyboards, preferably wireless, have been
found to be compatible with a P3/SVGA? Are there any that are full-travel,
rather than Chicklet style?
Thanks very much.
73, Jim N7US
__
Elecraft mailing list
Home
I turn my Astron P/S off after turning off my K3 for the night. Should I be
leaving the P/S on?
73, Jim N7US
-Original Message-
I just measured my fully-loaded K3/P3. They draw 1.94A on and 4.3 mA off.
Alan N1AL
My electric bill from ComEd in Chicago charges the same rate per kWh
regardless of usage. Adding in all costs, the cost per kWh is 9.3 cents.
Other costs of living here are high, but I guess I can afford to keep the K3
powered up if I wanted to.
73, Jim N7US
-Original Message-
K3 #642
I'm almost finished assembling a KAT500, and I haven't found a step calling
for the lock washer, #4, interior tooth (P/N E700010). Do any of you KAT500
assemblers remember having an extra? The parts list says only one was
included in the miscellaneous bag.
73, Jim N7US
Makes sense, Don, but this one is listed on the parts list but I don't see a
use for it.
73, Jim N7US
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: September 29, 2013 16:02
To: Jim N7US
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [KAT500} Extra lockwasher
Ron,
I think you're referring to the KPA500, not the KAT500. I'm sorry to have
confused you.
The KAT500 has only one on the parts list.
73, Jim N7US
-Original Message-
Jim:
All 29 #4 interior tooth lock washers are called for in the assembly
procedure. It sounds like you left one
/detail/2951 .
73, Jim N7US
-Original Message-
Bill Frantz wrote
...but what really works wonders are my Sennheiser noise-canceling
headphones.
Sennheiser NoiseGard™ 2.0 technology provides up to 90% active noise
cancellation
http://en-us.sennheiser.com/noise-cancelling-headphones
is crisp, they sit
around my ears, not on them, and are comfortable for many hours in a contest.
I realize the limitations of eHam reviews, though they score well -
http://www.eham.net/reviews/detail/2951 .
73, Jim N7US
-Original Message-
Bill Frantz wrote
...but what really works
The question was answered on the Writelog reflector:
http://lists.contesting.com/archives//html/WriteLog/2011-11/msg00064.html
73, Jim N7US
-Original Message-
I need help setting up WriteLog ver11 to toggle The KDVR3.
Based on the manual, I've set keyboard shortcuts for four unused
version, and maybe it can be made
available on Elecraft's website.
Let's hope Bill is doing OK.
His direct email address is n...@stny.rr.com .
73, Jim N7US
-Original Message-
Good afternoon gentlemen,
Does anybody know what has happened to N2BC's website? I was looking for the
K3 EZ
I've never had an RFI issue with Logitech wireless keyboards and mice.
73, Jim N7US
-Original Message-
Well, I guess I was just reading into it a version of my wish list Don. I am
currently using a Logitech K120 from Staples. $15.95 and two RS Ferrites.
Seems to work OK at 100W. I
, Jim N7US
-Original Message-
Is there a utility somewhere that will convert a K3 saved configuration from
gobbledygook to plain language? I'd like to share config data with another
ham, but I know I can't just send him my saved config file.
Thanks!
Dave Hachadorian, K6LL
Big Bear Lake
Regarding shipping, the last I knew each UPS store is individually owned and
they are free to charge whatever they want for insurance. On the other
hand, FedEx Kinko's is owned by FedEx, and the shipping/insurance there is
the same as at a regular FedEx facility.
73, Jim N7US
-Original
My mail program, Outlook, automatically removes extra line breaks in plain
text messages and wraps text to fit the window.
73, Jim N7US
-Original Message-
Some postings appear in a format that is quite easy to read - specifically,
they are formatted to fit the screen they are being
are in the files folder of the DXLab Yahoo
reflector,
http://groups.yahoo.com/group/dxlab/files/Command%20Sequences%20%26%20Slider
s/Elecraft/ .
Commander's UDCs have the ability to have a comment line for each line of
the macro, as Stewart described below.
73, Jim N7US
-Original Message
simple and easy.
Double clicking on a DX spot with a QSX frequency in the SpotCollector
module sets the K3 to the spotted station's frequency/mode/split.
http://www.dxlabsuite.com/
73, Jim N7US
-Original Message-
*Geoff,
While I agree with your comments regarding split, how would you
I've tried my old 444D too and like the sound of it with no TX EQ.
73, Jim N7US
-Original Message-
I pressed my 40 year old Shure 444D into service with my K3. Cosmetically,
it goes very well with the K3.
On-the-air reports, the locals on I chew with on 75 says it sounds just
fine. I
he spent more time than that.
It was unsettling to not have conclusively determined the problem,
especially since it seemed to happen without warning, but it's been working
fine.
73, Jim N7US
-Original Message-
From: T Gahagan [mailto:wa7...@gmail.com]
My K3 produces no RF in transmit
.
Am I missing something?
I use the K3 12V jack for my PR6 but have my P3 connected to the power
supply that powers other 12V accessories.
73, Jim N7US
-Original Message-
I'm probably showing off my rapidly thinning hair and lousy eyesight,
but
I looked at the SMT diode for more
Has anyone tried jumpers to connect a PR6? I have a tough time getting to
the jacks above and below it when it's connected to the K3 with the
double-male adapter.
73, Jim N7US
-Original Message-
The winner seems to be Cables on Demand www.cablesondemand.com with L-Com
http://www.l
PDF manuals, including KE7X's book, can be transferred to a tablet computer
for reading in a recliner, airplane seat, or whatever!
73, Jim N7US
-Original Message-
It's nice to have both. The electronic one gives you a great ability to find
things, it's easily updated, and takes up
A friend has a K2 and he asked me what's required to use a P3 with it. I
didn't find the info on the Elecraft website. Any suggestions on where to
look? Thanks.
73, Jim N7US
__
Elecraft mailing list
Home: http
98 matches
Mail list logo