My new, unbuilt XV-144 kit with optional crystal oven is still for sale. I
have dropped the price to U.S. $405.00, which includes shipping to Canada or
CONUS.
73,
KenVE3HLS
__
Elecraft mailing list
Home:
Thanks for your interest everyone, the K1 I have was sold earlier today.
Thanks and 73,
KenVE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
sure if they are glued to the existing aluminum
side panels or if the screws hold them. The radio is cosmetically good in
every other respect.
Serial Number 00863
U.S. $300. I will pay for shipping to addresses in Canada or CONUS.
73 and thanks for your interest,
Ken Alexander
V
Hi Folks,
I have a K1 that I'd like to put up for sale. I don't remember what
they sold for originally and I'd like to price it fairly. It has a
4-band filter board and I think I can dig out the original 2-band board
too. Any help would be appreciated.
Thanks and 73,
Ken Alexander
Just sold mine today. I guess I could have asked for a lot more for it but I'm
not the opportunistic type.
73,
KenVE3HLS
Sent from Yahoo Mail on Android
On Fri, 24 Nov 2017 at 18:18, David Ferrington, M0XDF
wrote: That’s a shame, that was going to be a
The XV-432 transverter has been sold. All other listed items are still
available.
Thanks and 73,
KenVE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm moving in 2018 and can't take these items with me. Note that all prices
include shipping to CONUS or Canada.
1. Elecraft XV432 70cm transverter with optional crystal oven. Built by me.
Aligned & tested by Don Wilhelm W3FPR. 28 MHz I.F. 5W in, 20W out. Can be
reconfigured for other
It wasn't clear if satellite QSOs are allowed. Does anybody know for sure?
73,
Ken
VE3HLS
On 2017-11-09 09:02 PM, John Harper wrote:
Here's another NPOTA-like event that will get the portable ops portably
operating in 2018:
thanks,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Thank you David for the explanations! The setup took only minutes after
I knew what the settings meant.
Thanks again and 73,
Ken Alexander
VE3HLS
On 2016-06-26 4:42 AM, David Anderson wrote:
Ken,
Please read my inline comments below.
I stumbled my way through the rest of the XV432
1296 transverter. Well, or
use a good antenna switch or relay.
Thanks in advance for any assistance!
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
. I'd appreciate any help.
Thanks and 73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
window.
Hope this helps,
73,
Ken Alexander
VE3HLS
On Mon, 11/30/15, James Rodenkirch <rodenkirch_...@msn.com> wrote:
Subject: [Elecraft] How to make the KX3 controlled by logging sofftware like
N1MM??
To: "elecraft@mailman.qth.net
the inserting in and removing of plugs. I know I can use Y-adapters,
but that only adds to the considerable mess hanging off the side of my KX3.
73,
Ken Alexander
VE3HLS
On 2015-11-14 7:19 AM, Erlend Grimseid wrote:
I would buy some like that in a flash. Wouldn't there be room for a n mini
Hi George,
They have a piece of sample code to do what I think you want to do at
the bottom of page 6 of the K2s & K3 & KX3 Programmers Reference
document. You can download the PDF file from the Elecraft website:
http://www.elecraft.com/K2_Manual_Download_Page.htm#KX3
73,
Ken A
can imagine right out of the box!
73,
Ken Alexander
VE3HLS
On 2015-10-22 10:00 PM, ky7k wrote:
Ultimatic mode, in addition to Iambic A and B.
On Oct 22, 2015, at 6:54 PM, ae...@carolinaheli.com wrote:
I asked for specifics so we can suggest/ask Elecraft for them and all I've
seen so far
It sounds like you have a Mode A keyer and a Mode B hand Roger! There's a
switch somewhere to change your hand back to Mode A. Hope you kept the
manual!! :-)
73 - Ken
VE3HLS
On Wed, 10/21/15, Roger Crofts wrote:
the just got a KX3.
Jeff - kg7hdz
On Oct 18, 2015, at 6:40 PM, Ken Alexander <k.alexan...@rogers.com> wrote:
Thanks Guys!
That did it! WSJT-X has a transmit level control and WSPR doesn't. Turn out
the output level coming from WSPR is much higher than from WSJT-X. I had to
reduce the Mic
. This is on my list of DSP tasks when
I get a roundtuit.
Lyle KK7P
On 10/18/15 4:24 PM, Ken Alexander wrote:
I installed WSPR version 2.12_r3617 a few days ago and it does not
"appear" to be transmitting. The VOX on my KX3 activates and the TX
LED lights up, but no ALC bars. Switchi
this "problem." :-)
73,
Fred K6DGW
- WACC Admin Dude
- Northern California Contest Club
- Sponsor: Worked All California Counties Award (WACC)
- www.nccc.cc/awards.html
On 10/18/2015 4:24 PM, Ken Alexander wrote:
HOWEVER,
people are reporting receiving me on WSPRnet, so I'm not seei
ccessfully with the same setup.
- Mode: DATA A
This is weird. Can anyone enlighten me as to what is or isn't
happening? I'd appreciate any assistance!
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
ware of this until today, but it did cause quite a bit of
confusion.
73
David Anderson GM4JJJ
73
David Anderson GM4JJJ
On 11 Oct 2015, at 19:40, Ken Alexander <k.alexan...@rogers.com
<mailto:k.alexan...@rogers.com>> wrote:
I'm trying to set up my new KX3 to run JT-65. I can't figur
and not there
either. It still displays SWR/RF in receive and transmit. All the
manual says in the DATA A and AFSK A section is to adjust the mic gain
for 4 to 5 bars of ALC indication. I can't until I can switch the meter
display over.
Any help would be appreciated.
Thanks,
Ken Alexander
VE3HLS
Ha! You should have been here when someone announced a new ICOM rig on
the list a few weeks back...it was endless!
73,
Ken Alexander
VE3HLS
On 2015-09-14 11:11 PM, Fred Jensen wrote:
OK, just curious here, how can a simple speaker with nice looking
enclosure get this much traffic
I think life must be really really good for you if this is what you
spend your time worrying about. It started life as a K3, and no matter
how many options you add or how many mods you do to it it'll still be a K3.
73,
Ken Alexander
VE3HLS
On 2015-09-12 2:56 PM, John Buck wrote:
I
Maybe Elecraft should offer to sell "vanity" serial numbers for their
equipment. Sounds like a good way to extract some extra bucks from
people who find such trivial things important.
Having a great piece of equipment isn't enough?
73,
Ken Alexander
VE3HLS
On 2015-09-06 11:0
removing it) to give you more room to look at
something else!
That's the future I'd like to see!
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
There's a button right on the front panel that says SPLIT.
73,
Ken Alexander
VE3HLS
On 2015-09-02 8:48 PM, Tony Estep wrote:
I note that it has only one tuning knob, which in turn probably means you
can't do the standard dx-split operating technique. If that's the case,
then no matter what
message.
Many thanks for the suggestions to those who offered them.
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
.
How does one specify the sidetone frequency they want?
Thanks and 73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
is knowing about licensing agreements and what you need
to know to legally operate from Italy.
Others may know better, but that’s my take on it.
73,
Ken Alexander
VE3HLS
On Aug 28, 2015, at 9:53 PM, Tom Morehouse k4...@me.com wrote:
I was planning to take my KX3 to Italy next week on vacation
should be in. If the opposite sideband is on the right
of the display then shouldn’t I be in LSB? If it doesn’t matter for this
procedure then that would have been useful information too.
Any ideas or assistance would be gratefully received!
Thanks and 73,
Ken Alexander
VE3HLS
From: http://www.elecraft.com/elecraft_shipping_status.htm
New K3S orders now ship 2-3 weeks after order date.
It will take 2-3 more weeks to ship our current backlog. We're running as fast
as we can!
73,
Ken Alexander
VE3HLS
On Thu, 7/30/15
to provide for the
addition of a keyboard then I'm even happier about my decision.
73,
Ken Alexander
VE3HLS
On Wed, 7/29/15, steve sm.shearer...@gmail.com wrote:
Subject: [Elecraft] SideKar vs PX3
To: ELECRAFT reflector elecraft@mailman.qth.net
!
73,
Ken Alexander
VE3HLS
On 2015-06-11 1:28 PM, Michael Babineau wrote:
When did the International USPS shipping rates go out the roof ???
I just ordered a noise blanker for my K2 (~$USD60 ) and the cheapest shipping
to Canada via USPS came up as $USD38 !
Yikes … that almost doubles
is yellow and not
red. However, I'd feel safer if someone who has built one before could
kindly confirm this.
The second thing that bothers me is why does one 4-turn inductor have
one more turn than the other 4-turn inductor?
Any assistance will be gratefully accepted.
Thanks and 73,
Ken
, they
should be the same.
In other words, the High Accuracy Kit is a retrofit for older XV432
transverters, and is not necessary for new ones.
73,
Don W3FPR
On 8/30/2014 6:26 PM, Ken Alexander wrote:
Hi folks,
I'm working on my XV432 kit this weekend. I ordered the high
accuracy crystal
Don...not Dan! Sorry!
Ken
On Aug 30, 2014, at 10:30 PM, Ken Alexander k.alexan...@rogers.com wrote:
Hi Dan,
Wow! That's a lot of money to spend only to find I don't need the darn
thing! I'll be talking to Elecraft about that next week.I ordered both
about 3 weeks ago. Thanks
Hello Klaus,
I wonder if it's possible that some of the foreign stations you reported
hearing are being relayed by a European broadcast station much closer to you,
and that's why they are strong enough to contribute to your break through
problems. Just a thought.
73,
Ken Alexander
VE3HLS
for the KPA100, which I built (and
despite that it performs flawlessly!)
Total current price is $1599.70.
I am asking $1000.00 and that includes shipping by mail anywhere in Canada or
the U.S. Please contact me directly if you are interested.
Thanks and 73,
Ken Alexander
VE3HLS
Actually, it's hear hear.
73,
Ken Alexander
VE3HLS
From: KQ8M k...@kq8m.com
To: 'Bert Craig' wa...@arrl.net; dukl...@broadpark.no;
elecraft@mailman.qth.net
Sent: Wednesday, May 23, 2012 12:55:34 PM
Subject: Re: [Elecraft] PLease stop OT threads
Here here
.
Their country...their rules.
73,
Ken Alexander
VE3HLS
On 08/05/2012 2:55 PM, Dave Johnson wrote:
The licensing looks pretty strict and stuck in the past. The list of
approved transceivers is very dated...
Perhaps Elecraft can provide a firmware fix to limit the K3 to the
band segments shown
) on 20m years ago
with a 24 ft wire and two 8-foot radials that were stretched actoss my
2nd floor bedroom floor. The antenna wire ran out to a tree outside my
window.
73,
Ken Alexander
VE3HLS
On 06/05/2012 8:54 PM, Bernie KF0QS wrote:
Dear Folks:
I have a K2/10 (#6922) and a K1 (#1024). I
From: Ken Alexander k.alexan...@rogers.com
To: Elecraft elecraft@mailman.qth.net
Sent: Monday, April 30, 2012 11:14:33 AM
Subject: [Elecraft] Loading inductor Question
Folks,
Given that inductors on toroid cores are used extensively in autotuners, is
there any reason (assuming I choose
antenna? I'm talking 100
watts maximum transmitter output here.
Any down side to doing this?
Thanks and 73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Don't get me started on the custom knobs!!! :-)
73,
Ken, VE3HLS
From: Rick Dettinger k7m...@gmail.com
To: riese-k3...@juno.com
Cc: elecraft@mailman.qth.net
Sent: Wednesday, February 22, 2012 11:59:47 AM
Subject: Re: [Elecraft] Can't we move on
Don't
Come over to the dark side Luke. It's your destiny. D. Vader, 1977
From: Sam Morgan k5oai@gmail.com
To: elecraft@mailman.qth.net
Sent: Wednesday, February 22, 2012 12:44:54 PM
Subject: Re: [Elecraft] Can't we move on
I'd like to add my vote for the
look? Any thoughts?
Thanks in advance
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
From: Jim Brown j...@audiosystemsgroup.com
To: elecraft@mailman.qth.net
Sent: Friday, February 10, 2012 2:01:22 PM
Subject: Re: [Elecraft] Source for Type 31 Toroids
On 2/10/2012 10:23 AM, Ken Alexander wrote:
However, Fair-Rite's online catalog does not list them
To: Ken Alexander k.alexan...@rogers.com
Cc: elecraft@mailman.qth.net
Sent: Friday, February 10, 2012 1:54:13 PM
Subject: Re: [Elecraft] Source for Type 31 Toroids
Hi Ken …
Just checked the Fair-rite website, and the type 31 cores are indeed there.
But they aren't easy to find. You need
of beads made from 31
Material. Specifically, 13 round wire type beads and 12
snap-on beads, with prices ranging from 75 cents each to
about $20 each, depending on size.
You can order directly from www.amidon.com.
Lew K6LMP
On Feb 10, 2012, at 12:45 PM, Ken Alexander wrote:
Son
again and 73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
. I'd prefer someone who has experience with building and
testing Softrock kits, but if you have experience working with surface
mount kits then I'd like to hear from you too!
Please reply off-list and let me know how much you would like to
complete the kits.
73 and many thanks,
Ken Alexander
to Ken.
-Bruce, N1RX
I don't get many requests for the Cheatsheets any more, but if some
kind soul would e-mail me a copy then I'd be able to fulfil any future
requests.
Thanks and 73,
Ken Alexander
VE3HLS
__
Elecraft mailing
requests for the Cheatsheets any more, but if some kind soul would
e-mail me a copy then I'd be able to fulfil any future requests.
Thanks and 73,
Ken Alexander
VE3HLS
On 15/01/2012 11:23 AM, Pierre wrote:
Here is a link:
KX1 Info Cards (6 Pages) Ken Alexander, VE3HLS e-mail request
What Ron says is quite true. I haven't even received Matthew's original
post yet!!!
73,
Ken Alexander
VE3HLS
On 14/01/2012 11:49 AM, roncasa wrote:
On 1/14/2012 9:47 AM, Matthew Pitts wrote:
Is it just me, or is anyone else receiving responses and corrections to
posts before the original
the
mediumwave band with something as good as an Elecraft leaves me
breathless. Being able to transmit on the 600m band with an Elecraft is
just too cool to contemplate!
73,
Ken Alexander
VE3HLS
On 12/01/2012 9:24 PM, riese-k3...@juno.com wrote:
Gang
with all the traffic that goes through
On Jan 12, 2012, at 7:07 PM, Ken Alexander wrote:
Hi Bob,
I wasn't paying close attention, but I thought I read that the KX3 will
cover the upper half of the MW band and could be made to cover the rest
of the band in the future. Hopefully, somebody with a better memory
than mine will jump
the lowest setting to be the
best but that's a personal preference. Noise reduction isn't available
with the RTTY filters because it degrades the signal too much and makes
decoding difficult.
Definitely download yourself a copy of the manual!
Happy New Year,
Ken Alexander
VE3HLS
On 03/01/2012 6:47
I don't know why C.1 would say LPA.SS. It sounds like something hasn't
been set correctly. The other settings look OK. .60 means the filter
is centered on 600 Hz and the number to the right is the width of the
filter in kHz, where .80 would be 800 Hz and .10 would be 100 Hz (for
contests,
be transmitting
with two to three times the power? 10 to 15 watts (versus 5) on
transmit will run down a battery a lot faster than a few hundred
milliamps on receive.
73,
Ken Alexander
VE3HLS
On 29/12/2011 8:02 PM, Johnny Siu wrote:
Hello Elecrafters,
I posted below in the FT817 yahoo group
happen to have one?
73, thanks in advance and Happy Holidays!
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Received a copy just minutes after posting my request!
Many thanks,
Ken
VE3HLS
Original Message
Subject:K2 rig control command list
Date: Wed, 21 Dec 2011 19:50:15 -0500
From: Ken Alexander k.alexan...@rogers.com
To: elecraft@mailman.qth.net
There used
header. Same thing? Just in a different
location?
Many thanks for any assistance!
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
You're evil Wayne! This is going to drive everyone nuts!
73,
Ken Alexander
VE3HLS
On 04/12/2011 4:03 PM, Wayne Burdick wrote:
The KX3 owner's manual includes a 2-page Control Panel Reference
section that provides an overview of the KX3's controls and display.
Here's the link:
http
At age 55, it's nice to be considered younger at all! :-)
73,
Ken Alexander
VE3HLS
On 30/10/2011 3:34 PM, Tom McCulloch wrote:
Actually, it's nice see younger people into CW at all. Or even more
so, it's nice to see younger people at all in Ham radio!
Tom
WB2QDG
On 10/30/2011 1:42 PM
, have times changed!
BTW, I still hold a current commercial radiotelegraph license, but I doubt
if I'll need it again, Hi!
73,
Ron AC7AC
-Original Message-
Never been a big fan of bugs and the mangled code most people send with
them. ...
73,
Ken Alexander
VE3HLS
On 29/10
Yeah I know. It's like debating about the best equalizer setting for
optimum transmit audio...very subjective. Anyway, I've said my piece
and Eric will probably be happy to see we've moved on without any
prompting on his part! :-)
73 - Ken, VE3HLS
On 29/10/2011 2:50 PM, stan levandowski
keep it if he wanted to. He grinned, handed it back and I was on
my way!
73,
Ken Alexander
VE3HLS
On 29/10/2011 12:09 AM, Mike Morrow wrote:
Noted last episode a Vibroplex or similar was used
to send a telegram or cablegram
http://beta.abc.go.com/shows/pan-am/jet-setter/104a-cablegram
I
Nice! Looks pretty funky!
Maybe Elecraft should sponsor a design contest to make a working
all-band antenna in that exact configuration. Something they could
sell. The winner gets a complete K-Line station!
Eric? Wayne?
73,
Ken Alexander
VE3HLS
On 26/10/2011 11:24 AM, Tony Estep wrote
Thanks Don, and all who contributed to help him.
Yours has been an interesting story and it was educational to watch it
unfold here. I bet the CQ or QST would eat up a story like that if it
was well documented and turned out as well as yours.
Regards,
Ken Alexander
VE3HLS
On 23/10/2011 9:13
Just as long as this doesn't get in the way of any KX3 development! :-)
73 - Ken, VE3HLS
We're shooting for having the KAT500 out before the end of the year
and will publish more info on it as we get closer.
__
Elecraft mailing
to ship it. U.S. hams: I'll be happy to meet
you in Niagara Falls, Ontario, the border crossing near Gananoque,
Ontario (east end of Lake Ontario) or near Windsor, Ontario (let's say
London, OK?).
73 and thanks for your time,
Ken Alexander
VE3HLS
Uh huh! That's what I thought just before you dropped the KX3 bomb on
us! :-)
73,
Ken Alexander
VE3HLS
On 25/07/2011 10:34 PM, Wayne Burdick wrote:
If there's ever a K4, it'll be a game-changer, or we won't bother.
As of right now we're very happy with the K3, thank you :)
73,
Wayne
Hi Brian,
Interesting post. I've read of others using GPS this way, but what does this
kind of accuracy buy you when maybe 1 in 100,000 other hams go to this kind of
trouble?
73,
Ken Alexander
VE3HLS
--- On Wed, 7/20/11, Brian Alsop als...@nc.rr.com wrote:
From: Brian Alsop als
This item is SOLD. Thanks for your interest.
73 - Ken
On 7/19/11 11:38 PM, Ken Alexander wrote:
Hi Folks,
I have for sale one Palm 817 Mini-Paddle. This is a very nice, small
(1 x 1 x 3) paddle perfect for portable use. The Palm 817 is black
to match a Yaesu FT-817 and come with a snap
= $199 (plus
shipping) on the Buddipole website. I will sell for U.S. $130.00, which
includes shipping anywhere in Canada or the U.S.A. Contact me off the
list if interested.
Many thanks,
Ken Alexander
VE3HLS
__
Elecraft mailing
or money order (or personal cheque
if you don't mind waiting for it to clear).
Many thanks,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
got to count for something!
73,
Ken Alexander,
VE3HLS
--- On Fri, 6/17/11, Phil Hystad phys...@mac.com wrote:
From: Phil Hystad phys...@mac.com
Subject: [Elecraft] [KX1] On the trail with the KX1 -- Antenna ?
To: elecraft Reflector Elecraft@mailman.qth.net
Date: Friday, June 17, 2011, 10:28
mount components.
Something as complex as a KX3 would have me in tears before I finished
unpacking it!!
And by the way, if anyone here has experience with Softrock kits and could
complete my kits for a modest fee, I'd be interested in hearing from you.
73,
Ken Alexander,
VE3HLS
--- On Fri, 6/3
Hi Folks,
I have several straight keys and paddles for sale, originally owned by a ham
friend who passed away recently.
1. Bencher chrome straight key, model RJ-2 -- $90Photo:
http://www.flickr.com/photos/kenaimages/5766548153/in/photostream
2. Vibroplex straight key, chrome base --
: it's worth sticking around, but you might want to look into
ways of managing the traffic.
73,
Ken Alexander,
VE3HLS
--- On Thu, 5/26/11, Dave Sharred g3...@yahoo.co.uk wrote:
From: Dave Sharred g3...@yahoo.co.uk
Subject: Re: [Elecraft] OT - Why so much Off topic??
To: elecraft@mailman.qth.net
Hi Doug,
I didn't read where it says you contacted Elecraft to discuss this with them.
Did you take this up with them before posting here? If not, then it seems a
little unfair to complain publicly before giving them a chance to resolve the
problem for you.
73,
Ken Alexander
VE3HLS
a new Chevy
with a 200 hp engine, and the next year they'd managed to tweak another 20 hp
out of the same engine would you take your car back to the dealer and demand
they replace the engine for you?
73,
Ken Alexander
VE3HLS
Contentedly working DX with the stone-age DSP in my K2
With the base model K3 starting at $1500 it seems to me the basic 5/10W KX3
will likely range between $900 and $1200. Maybe more...hard to say.
Anyone else care to speculate?
73,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home
Say W H A T ???
Please guys. How about a photo? Not everyone can make it to Dayton!!
73,
Ken Alexander, VE3HLS
--- On Wed, 5/18/11, Wayne Burdick n...@elecraft.com wrote:
From: Wayne Burdick n...@elecraft.com
Subject: [Elecraft] Something *really* new at Dayton from Elecraft
--- On Wed, 5/18/11, Wayne Burdick n...@elecraft.com wrote:
...and a K3-like front panel, including the same LCD.
And it makes use of EVERY display on that LCD?? Carumba!
Is it a full kit or a final assembly type like the K3?
Care to put us in the ballpark on the price?
73 - Ken
Hi Robert,
What happens if you try that into a dummy load instead of your antenna? How's
your SWR?
73 - Ken
--- On Fri, 4/22/11, Robert G. Strickland rc...@verizon.net wrote:
From: Robert G. Strickland rc...@verizon.net
Subject: [Elecraft] K2/100 pwr out control problem
To: Elecraft
Looks neat Greg, but does N1MM Logger support the shuttle jog wheel for
frequency control?
73,
Ken Alexander
VE3HLS
--- On Mon, 4/4/11, Greg a...@cablespeed.com wrote:
From: Greg a...@cablespeed.com
Subject: [Elecraft] Keyboard for sale
To: n1mmlog...@yahoogroups.com, Elecraft Reflector
.
73 and thanks,
Ken Alexander
VE3HLS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
: RE: [Elecraft] AF-1 For Sale or Trade
To: 'Ken Alexander' k.alexan...@rogers.com
Cc: elecraft@mailman.qth.net
Date: Wednesday, March 30, 2011, 10:51 AM
No argument Ken! The AF-1 wasn't
created as a K2-specific accessory, but as
a useful little filter for any receiver (especially
lesser
Some sort of antenna analyzer? That would be really nice!
73,
Ken Alexander
VE3HLS
So is the mysterious T1-sized
piece of test gear I alluded to a couple of weeks ago.
73,
Wayne
N6KR
__
Elecraft mailing list
Home: http
with the postage rate first. Paypal or money order please.
I'm in the market for an Elecraft W-1 wattmeter, so if you have one and are
interested in an AF-1 then maybe we can work out a trade. Or if you just want
to sell your W-1 then please get in touch with me.
73 and thanks,
Ken Alexander
VE3HLS
Yes, I'd be very happy the either!
73 - Ken
--- On Tue, 3/29/11, juergen plebia...@yahoo.com wrote:
From: juergen plebia...@yahoo.com
Subject: Re: [Elecraft] EXTERNAL 10MHZ KIT
To: Bruce Beford bruce.bef...@myfairpoint.net, Wayne Burdick
n...@elecraft.com, Ken Alexander k.alexan
did it again!
To: Ken Alexander k.alexan...@rogers.com
Cc: elecraft@mailman.qth.net Reflector elecraft@mailman.qth.net
Date: Friday, March 18, 2011, 9:05 AM
On Mar 17, 2011, at 7:26 PM, VE3HLS wrote:
How about adding a feature to the firmware such that
if you do or don't work a split QSO
off his frequency.
How about adding a feature to the firmware such that if you do or don't work a
split QSO the split setup is turned off as soon as you tune more than 300 Hz
away from him? Pick any number of Hz you like but you get the idea.
Just a thought
73,
Ken Alexander
VE3HLS
SDRs like the Perseus
The K3 would need mediumwave and longwave (down to 100 kHz) coverage to be of
interest to me and the listeners I hang out with.
73,
Ken Alexander
VE3HLS
--- On Thu, 3/17/11, Alan Bloom n...@sonic.net wrote:
From: Alan Bloom n...@sonic.net
Subject: Re: [Elecraft
doesn't need another DVM and it's too small to be
a scope!
73,
Ken Alexander
VE3HLS
--- On Sun, 3/6/11, Wayne Burdick n...@elecraft.com wrote:
From: Wayne Burdick n...@elecraft.com
Subject: Re: [Elecraft] Maxwell's Equations.
To: Elecraft elecraft@mailman.qth.net
Date: Sunday, March 6, 2011
I dunno. They're not bad with a little salt and a beer! 8-)
73,
Ken Alexander
VE3HLS
--- On Sun, 2/27/11, Jim Brown j...@audiosystemsgroup.com wrote:
From: Jim Brown j...@audiosystemsgroup.com
Subject: [Elecraft] Packing Peanuts -- I HATE THEM !
To: elecraft@mailman.qth.net
Date: Sunday
Hi Eric,
Try here:
http://www.g4ilo.com/ktune.html
It was designed for a K3 but I've been thinking of trying this with my K2.
73,
Ken Alexander
VE3HLS
--- On Mon, 2/21/11, Eric Rosenberg ericrosenberg...@gmail.com wrote:
From: Eric Rosenberg ericrosenberg...@gmail.com
Subject: [Elecraft
1 - 100 of 234 matches
Mail list logo