[Elecraft] K2 Heil Microphone

I have a Heil headset that I have been using with my TenTec Jupiter. I want to use it with my K2. My K2 is set up for the Elecraft MH2 microphone. Can I simply order a Kenwood adapter for use with the Heil to interface with the K2? Ken/NO4D -- View this message in context:

[Elecraft] K2 PSK31

In order to transmit PSK31 on the K2 do I have to have the RS232 adaptor? I am receiving the signals via the earphone output but now I want to transmit also! Always something…grin Ken/NO4D -- View this message in context: http://www.nabble.com/K2---PSK31-tp15885415p15885415.html Sent from

[Elecraft] Re: Portable Antennae

Hey Mike: I would love to get the PDF with the info. This sounds exactly like what I am looking for. Thanks! Ken/NO4D Mike Morrow wrote: Ken wrote: ...I would like to construct a good portable antennae to use while camping I have played around with multi-band HF antennas for

[Elecraft] Portable Antenna - Thanks!

Thanks to all who responded to my question about a portable antenna for use with camping. I received to many responses to reply to each one individually...but THANKS for a lot of great ideas. There are a couple that I will be mulling over. 73 God Bless! Ken/NO4D

[Elecraft] K2 High Current Message

When keying up my K2 in SSB at 10 watts I get a momentary flash of high current. Is this a sign of a problem? Seems like there is a setting in the menu in regards to this, but want to be sure before I do anything. The transmit is fine, just the momentary flash of high current. Thanks!

[Elecraft] Portable Antennae

While I await my K3 (sometime in June) I would like to construct a good portable antennae to use while camping (RV camping). If it is a dipole it will need to be short enough to fit in the footprint of a campsite. Any recommendations.maybe even for a vertical? 73 God Bless! Ken/NO4D

[Elecraft] K3 Portable Operation

I am very interested in the K3 for use as a portable rig while camping. Have any of you new owners taken the K3 outside and operated portable on battery power? If so, what were you impressions? Additionally, if I build the 100W model, I can operate at QRP levels on battery with no issues?

Re: [Elecraft] Your Elecraft K3 slide show

Hey Lee: Is this slide show available on the net for download/view? Thanks! Ken/NO4D Lee (WW2DX) wrote: Thanks Bob appreciate the comments. Thanks goes to Scott WU2X for taking the the cool shots of me building. Finished the build about 11:30pm and we played till about 2 AM :)

[Elecraft] K3 Ordered

Ok...ok...do you remember the time you said no that you would not do something and then you eat your words and do so? Well, when the first words about the K3 hit the list and I was the price I said nope, not me...to much money. Well...the order has been placed for the QRP K3 and ATU! I KNEW that

[Elecraft] K2 Upgrade Questions

I am looking at upgrading my K2 to a K2-100. If I do, will I have to remove the internal ATU or battery pack? If I can leave the battery pack, will it charge while operating off of a 20amp supply for the 100? I want to leave the internal ATU for field operations at QRP

[Elecraft] KX1 Woes

Just pulled my KX1 out of the moth balls and powered it up. Upon being powered up it starts transmiting without a key hooked to it. Was working great last time that I used it. I have checked for bad solder joints and loose connections. Have tried it without the ATU installed with same luck.

[Elecraft] K2 4686

Well.it is hard to believe but K2 #4686 is alive and well! For some two to three years I had dreamed of building a K2, but for lack of funds and fear of failure I kept putting it off. Finally, the itch got to be to much for me. So, back in February I called Lisa and placed my order. Except

[Elecraft] Signal Tracing - Success!

Well, with my head hanging low and a sheepish look on my face...I can report that I have completed Phase II Testing with success! I had asked for some assistance yesterday with signal tracing in order to find where the signal was being lost. After reading some replys, *trying* to read and

[Elecraft] K2 Signal Tracing

I am in section II alignment of my K2. I am not getting a signal from my antenna jack to the output. I am using Tom Hammond's method of signal tracing using the lead of a capacitor attached to a clip that is attached to an antenna. I have a signal when injected at the following test points;

[Elecraft] Spectrogram

Do I remember correctly that there is/was a free use version of Spectrogram for aligning the K2? If so, where can I download the program? -- 73 God Bless, Ken/NO4D http://webpages.charter.net/kgk Ambassadors For Christ Net +/- 7.280 M-F at 2:00 EST Sat at 3:00 EST

[Elecraft] Spectrogram/Thanks!

Thanks guys for all of the quick responses in regard to the free version of Spectrogram. In case others are interested, it can be found on Tom Hammond's /N0SS) website at http://www.n0ss.net/ 73 God Bless, Ken/NO4D http://webpages.charter.net/kgk Ambassadors For Christ Net +/- 7.280 M-F at

Re: [Elecraft] KX-1 output problem

Hey John: I had a similar problem with my KX1. It ended up being a bad solder joint on a resistor pack. I cannot remember which one, but if you look at the schematic you will be able to locate it. After applying a little heat to the joint all was OK. Hope this helps in some way. Ken/NO4D

[Elecraft] Portable vertical antenna

Thanks to each who sent me a suggestion for a portable vertical antenna for use while camping. I now have several options to choose from. God Bless, Ken/NO4D ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post