Hi,
In anticipation of the upcoming (warmer) POTA season, I'm looking for a T1
Tuner that some generous soul might be willing to part with. It looks like
it's going to be a long wait to purchase one from Elecraft, so if you have
one you'd like to sell, please let me know. You can contact me off-li
And, of course, as soon as I sent out an email, I figured out that the
OFS/VFO B knob had been spun WAY out of whack and the RIT/XIT offset was
way off. Cleared it out and all is well.
Thanks, sorry to take up bandwidth.
Mark KD8EDC
--
___
Hi,
I have no idea what is going on, but I probably simply misconfigured
something. I have a KX3/PX3/KXPA100, and I was using it happily yesterday.
Earlier today, I disconnected it to measure for my pelican case, but
reconnected everything and double checked the connections as I always do.
Everyth
Hi folks!
Just thought I'd post a note and a quick, hopefully easy question. I'm the
proud owner of a KX3/PX3 pair, which I built from kit. This is some
seriously great equipment. I was thinking that I'd LOVE to use the KX3 in
situations where I need a BIT more than 15 watts (various contests or
c
Here's what I use for the run up the mast to my HexBeam. The center
conductor is stranded copper, and the jacket is thermoplastic elastomer.
MUCH more flexible than standard LMR-400...thus, the name LMR-400 UltraFlex:
https://www.dxengineering.com/parts/tmv-lmr-400ultra
I have a run going up the
HI,
I to have always used only Amphenol connectors. However, this year, in
putting up another Gap Challenger, I am using a DXE pl259 at the antenna
coax end. DXE connectors have worked well for me in the past in another
application, are silver plated brass and the dialectric is PTFE. I've
spoken t
Hi,
I'm planning an NPOTA activation using my KX3 on SSB and CW, running max
output without an amplifier. My antenna will be an inverted V at 30', and
I'd like recommendations for a battery technology and brand, assuming I
don't use the internal batteries (I think I would rather not).
I'm looking
Hi,
As a ham since 2006, I've been working pretty much straight phone and
hand-keyed (paddled) CW. I've recently been bitten by the DXing/Contesting
bug, and this has led me not only to work very hard on my CW skills (a mode
I really, really like but which I'm still a novice at), but to take an
in
Hi,
It's come to my attention that my signature line has been getting thru into
my list posts. After fact-checking my sources for my last rotating
signature line (they change often and I tend to fact check pretty
consistently), my most recent line was factually completely incorrect, and
the attrib
And as so many others have done, as soon as I posted I found my problem. I
need to learn to plug stuff in the correct port...
Thanks anyway!
Mark
KD8EDC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hi,
Just built my KX3 and connected to PX3. Initially, powered up fine (smoke
test) after build with waterfall (blank) and minimal spectrum peaks as
you'd expect if it wasn't connected to a transceiver. Now connected to my
KX3 and listening to W1AW code file, and the spectrum is blank (no yellow
t
Hi,
I'm extremely excited. My KX3 and PX3 kits and assorted goodies arrived 2
days ago. I have to build 2 computers before I got to open the boxes, but
last night I build the KX3. It was a pleasure to build, the instructions
were excellent, and save for having a minor bit of trouble making SURE th
med away from you.
>
> If you get a KXPA100, it'll come with a right-angle BNC connector on a
> short cable with a PL259 on the other end. I'm sure you could buy just
> that from Elecraft and then use a dual SO239 to connect to your coax.
>
> So -- think right angle and
Hi all!!
I'm preparing to purchase the KX3 and PX3 kits. I'm planning on the ATU and
Roofing filter options, as well as the battery charger and clock. I'm also
planning on purchasing the Powerwerks switching PS and the power supply
cable for the PX3.
Initially, I plan to use the system as a QRP
14 matches
Mail list logo