[Elecraft] K2/100 RS-232 problem

Hi all, I've got a K2/100 that was damaged a while back in a close lightning strike. Sparky came in via the phone lines, traversed my modem into a multi-port RS-232 controller. It took out several RS-232 devices, including the serial port on the K2. All other K2 functions have been

[Elecraft] K2/100 RS-232 problem - SOLVED

It seems that cycling the PORT option in the menu reset something. I'm ready for Field Day. :) --Mike WQ5C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] K2/KPA100 vs. EC2/KPA100

Along the same lines - does remoting the KPA100 do anything to reduce the 10m birdie at 28.018? Thanks! --Mike WQ5C At 01:56 PM 5/17/2007, Greg Derda wrote: Thanks to all for all of the great replies so far!! One more quick question Is there anything to consider if I were contemplating

Re: [Elecraft] 10M birdie and other assundries

Anyone know if remoting the KPA100 to an EC-2 case reduces the birdie? --Mike At 10:32 AM 12/19/2006, Vic K2VCO wrote: J F wrote: Just out of curiousity, after spending some time on 10M during ARRL 10, I noticed a birdie around 28.019/20. Is there a way to eliminate this or move it below

Re: [Elecraft] OT: Looking for some foam.

Pelican makes foam inserts for their boxes. If they make a box of similar size to yours, the insert should work. Take a look at http://www.pelican.com/ . The bigger dealers carry replacement foam blocks. --Mike WQ5C At 12:25 PM 10/25/2006, Scott Spencer wrote: This is a bit off of the

[Elecraft] misaligned transmit receive?

Hi all, I had trouble checking into a local RTTY net the other night. It appears that on 80m RTTY, I'm transmitting about 1.3 KHz above where I'm receiving. RIT, XIT split are off. I don't know if this affects other bands or modes, since I mainly chase DX am operating split anyway. :)

Re: [Elecraft] k2 build question

Hi Ron, The masking material is the pieces of tape, usually green, around each hole. I found a sharp case cutter edge was necessary to remove it. You should have nice, shiny bare metal around the holes on the inside of each panel. That will make sure you get good RF shielding. The rest of

Re: [Elecraft] K2 RF board part C72 Identity

Hi Tim, I just finished the inventory on K2 #4693 yesterday. The cap you have is C22. C72 is very similar, but is marked with a small triangle followed by 271J. GL, --Mike WQ5C At 11:17 PM 1/22/2005, Tim Logan wrote: I'm having trouble locating this part. Manual says it should be labeled