Good afternoon, has any Canadian Elecrafters sent a rig to Elecraft for
warranty repairs and if so when the radio was return were you charged any duty
or HST taxes as it crossed over the boarder? I may be sending a rig down and
was just wondering what cross boarder experience was of those who
The P3 has been sold.
Mike
VE3WDM
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
NOTE right side of P3 has some scratches seems from handle of K3.
PRICE ASKING 580.00
I am selling the station as I have purchased the SUNSDRpro 2 but am keeping my
KX3 so part of the Elecraft family remains.
Mike Weir
VE3WDM
[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round
Good evening all I have a K3 and want to add the sub receiver I have the new
KSYN3A in my K3 but is my DSP board comparable? My DSP board in the K3 is rev C
Mike
VE3WDM
__
Elecraft mailing list
Home:
Does anyone on the list have a spare 500 hz 8 pole filter they would like to
part with?
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Does anyone want to sell their KPA3 if they have upgraded to newer KPA3A?
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
manual
SHIPPING COST TO DISCUSSED
BEST OFFER
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I want to put the following up for sale but am not really sure what a fair
price would be to ask?
K3 10 watt serial number 3619 excellent shape
KAT3 Tuner
KTCX03-1
KSYN3A
KXV3A RX
KIO3A
KBPF3
KUSB
KFL3A-6K
500Hz inrad 8 pole filter
400Hz inrad 8 pole filter
250Hz inrad 8 pole filter
. I have seen
this on other SDR setups but never on the P3 putting this out there for your
input.
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Good evening all, I just did the VFO mod on my KX3 with the new ball bearing
VFO. I now have the original VFO and if anyone would like it I am selling it
for 25.00 U.S shipping included.
Mike Weir
VE3WDM
__
Elecraft mailing list
Home
I am selling the KXPD3 paddle complete with 3 sets of springs (firm springs
installed) I have been using the Palm paddle with the KX3 from almost day one.
I just can't seem to give it up. So I am clearing the shack of the KXPD3
paddle. I am selling it for 60.00 U.S including shipping.
Mike
itfor
what I don't know. It's up for sale now for 160.00 US shipping included.
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Good afternoon group, today I have been trying to operate JT65 using my K3 in
DATA A mode along with WSJT-X program. When I activate "TUNE" in the WSJT-X the
K3 gives me an error message "ERR PTT" and the K3 goes back to receive. I have
never had this issue in the past and have not added any
id sometimes up to 3 tries. As well to want to spot a station and
nothing happens or A/B and nothing happens.
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
I checked the archives looking for information regarding a macro for the K3
that will turn the text decode on and off. The most recent archive regarding
this was from 2013 saying there was none. It's now 2017 and wondering if a
macro has been written to preform this function?
Thanks
Mike
Good morning all, I am in the process of programing macros to my K-pod. I have
been successful with all but the spot macro. According to the Elecraft K3 and
KX3 programmers rev E11 on page 22 I am to enter an open and closed single
quotation with a period in the middle. Funny thing is I can't
Good afternoon all, here is what I want to do.I have the K-pod and
I wanted to set up some of the F buttons to send CW contest replies such as:
My call
TU
Contest exchange and if possible an increasing serial exchange
Just not sure how to set all this up?
Thanks in advance
Mike
I have built 2 Elecraft K2's and very much miss the kit building thrill. I was
considering purchasing another K2 to build and maybe sell, while I was on the
order page I noticed KDSP2 has been discontinued?? Now maybe I was not paying
close attention to the reflector but I can't remember a post
Good afternoon, I just connected the K-pod to my K3 for the first time after
updating the firmware to the latest. I noticed that D4 is always on just
wondering if this is normal?
Mike
VE3WDM
__
Elecraft mailing list
Home:
While on 20m I tuned the MFJ 1788 to the lowest SWR which was 1.2:1. I did this
using the tune button on the K3. I noticed the SWR on the K3 was bouncing
around from 1.2, 1.3, 1.7, 1.4 and so on and never settling on just one
reading. This only happens on 20m and no other band that I tuned on.
I went online this evening to order some items for the Black Friday price. It
says free shipping in North America but in the checkout I am being charged
46.00 for shipping? I'm in Canada and that's North America so how is the
shipping free??
Mike
VE3WDM
Good afternoon all, I have the Elecraft K3 (not K3S) and was wondering if you
can do the Milliwatt meter calibration with the K3 utility?
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have a new Pelican 1200 black series case for sale. The foam has been picked
to fit an Elecraft KX3. If you have the KX3 this case is ready to go. Pic are
available to those interested. The cost is 40.00 including shipping. Mike
VE3WDM
I took my KX3 out on the trail today and for the first time ever I got ERR TXG
and D=114? I looked things up on my Iphone and seemed it needed a TX gain
calibration. It never has done this in the past but I figured maybe because I
loaded on the new firmware that gives me more Transmit power. I
Just today I notice a faint clicking noise when using my headphones and only
when the AF is turned up not when all the way down, here is my
setup.Elecraft k3, Begali key into a Winkeyer USB and the menu key weight
setting in the K3 is 1.10
Here is what I have tried to fix the issue with no
Good afternoon all, I have for some time now had the 6 Khz filter installed in
my K3. I was just recently on JT-65 in Data A mode and wanted to use the 6Khz
filter. I was only able to open the width to 4 Khz using the width knob? I
wanted to open it up to 6 khz so I could receive both JT65 and
settings at the
time were 250Hz filter and threshold was at 3 under decode settings and speed
was at 5-40 wpm.
Thanks in advance.
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http
On Elecraft firmware download page users are instructed if you download MCU
5.10 or higher the 50 watt cal has do be done again. Does this also apply to
the low power K3, do I have to re-do the 5 watt cal?
Mike
VE3WDM
and possibly added
to an update?
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
ve3wdmathotmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
This antenna has been used at most 4 times and I am selling as it's just not
being used as much as I would like. It is in mint condition and works great!
Price is 280.00 U.S including shipping.
Please email off list at ve3...@hotmail.com.
VE3WDM
Mike Weir
Good evening to the group, I was not able to participate last weekend in the CQ
WPX CW contest but I was wondering from those of you who did and had the new
KSYN3A synthesizer board in your K3's...how was the performance ? What did
you notice compared to the old synthesizer board?
Mike
I was wondering if anyone could email me or direct me to where I could download
the PDF document on how to change out P30 and P35 on my K3 with the upgraded
gold pin headers. MikeVE3WDM
__
I have the KX3 with the non ball bearing VFO and I am going to be placing an
order with Elecraft for the new synthesizer board for my K3 and if the KX3 ball
bearing VFO is a good mod to do then I will include that in my order as well ?
Mike Weir
VE3WDM
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
://ve3wdm.blogspot.ca/2015/02/im-putting-some-items-up-for-sale.html
If you have any questions please email
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
I am posting this for an elderly ham who wants to sell his KX3. Please contact
off list at ve...@sasktel.net
KX3 for sale Serial #-6315 Purchased
May 15/14 the Condition of rig- mint.
The options as installed by the
factory:
1.internal antenna tuner.
2.charger and real time
This unit is in excellent shape I built it myself but sent it down to Larry at
Telepost for calibration and final check. Comes with the Standard coupler the
LPC1, 50 mW to 3KW PEP/CW, 1.8 to 54 MHz. The many other features of this
professional piece of equipment are to many to list, go to
I had the following error message on my KX3..ERR TXG d=200 after pushing
the Tune button to see my SWR
This was my setup at the time..
KX3 on CW, filter setting 300, VOX on, ATU off, Pre on and the band was 20m
Antenna was mobile whip on my car and RG8 coax.
I had another unusual
I am selling the XG3 perfect working order and comes with the KXUSB cord.
Price 160.00 U.S shipped pic's are available as well.
Mike
VE3WDM
__
Elecraft mailing list
Home:
I have the N-Gen up for sale I put it together myself and no longer need the
unit.
Pictures are available and the price is 50.00 U.S including shipping.
Mike
VE3WDM
__
Elecraft mailing list
I built the kit myself and no longer need it. Pictures are available
20.00 U.S including shipping.
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
For those of you who own a KX3 and are a digi op such as myself a great
product I had ordered and installed on my KX3 is the Cooler KX
heat-sink. VE7FMN produces a product with the fit and finish as if it
came right from Elecraft. You can see more about this product on my blog
For those of you who own a KX3 and are a digi op such as myself a great product
I had ordered and installed on my KX3 is the Cooler KX heat-sink. VE7FMN
produces a product with the fit and finish as if it came right from Elecraft.
You can see more about this product on my blog
The unit is fully assembled and in great shape and works FB.
50.00 including shipping. Pics can be sent to you.
VE3WDM
Mike
__
Elecraft mailing list
Home:
I have an AT 200 pro auto tuner for sale it's in great shape and I was
using it until I purchased an internal tuner for my K3 rig. Cost is 200.00
Canadian (185.00 U.S)
Mike Weir
VE3WDM
__
Elecraft
I am considering using my base model k3 (without KPA100) for digi modes and was
not sure what the duty cycle was for the rig? One of the modes I was looking at
was JT65 and it as I understand has long keydown times. Do I have to keep the
rig at 5 watts for all digi modes and more so with the
This was posted a day ago but I did not double check the post and there seemed
to be a problem with the email formatting. Below is a more legible posting of
what is for sale. 1. Edgeport8 This is a great device if you have more serial
devices than you have serial ports on your pc. With this
This was posted a day ago but I did not double check the post, there seemed to
be a problem with the email formatting. Below is a more legible posing of items
up for sale.
1. Edgeport 8 This is a great device if you have more serial devices than you
have ports on your PC. With this unit you
Dick, K6KR has informed me that my price of the Edgeport is high and he saw one
on Ebay from Canada for 60.00. So mine is now 55.00 including shipping! Mike
VE3WDM
__
Elecraft mailing list
Home:
West Mountain 4004U This unit was purchased and mounted but never used. Priced
at 75.00
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
West Mountain 4004U This unit was purchased and mounted but never used. Priced
at 75.00
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
This unit has been sold.MikeVE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
1. Edgeport 8This is a great device if you have more serial devices than you
have serial ports on your pc. With this unit you can run 8 serial devices from
one USB port. 100.002. West mountain 4004U This unit was purchase and mounted
in the shack but never used. 75.003. Balun designs 1110u
This is my second K2 that I have built (this one only 1/2 way) it pains me
greatly to put it up for salebutwe have moved into a condo from our
large home. I have come to the realization that both hamming and kit building
cannot happen in such a small space. The kit was built in a
This is a great 2.5 foot active antenna that covers LF/MF/HF and I used it with
my K3 for diversity receive. This unit has been up in my attic and has not been
outdoors.
Mike
VE3WDM
__
I have this unit for sale works great bought it brand new and is in excellent
shape.
100.00
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I am selling my KRX3 sub receiver along with the following three 8 pole inrad
filters250 Hz 8 pole400 Hz 8 pole 500 Hz 8 pole New KRX3 599.00each inrad
filter 119.00 Total 956.00Selling for 650.00 firm plus shipping Mike VE3WDM
The DS 1052 scope is 5 months old and has the 100 mhz software mod done to it.
I also have 100 mhz probes as well. 250.00 firm MikeVE3WDM
__
Elecraft mailing list
Home:
When using WSPR the TX and RX frequencies are not the samefor example on
30m the RX is 10.138700 and the TX is 10.140200. For those of you using the K3
does your read out on the K3 change to the TX freq then the rig goes into
transmit? Mine is not and not sure if this is normal or if I have
Just downloaded CW skimmer and am using it with the LP Pan, E MU 0202 and of
coarse the K3. I am in the process of setting things up and has some questions.
As well just wanted to share the setup options I chose just to make sure they
are ok.
Under the settings taband then to the radio tab
In my K2 build I am approaching the alignment and test part 2 stage. I
have the Rigol DS1052E scope (software upgraded to 100mhz) I would like
to use the scope on my K2 build. I do know there is spectrogram, and
features on the K2 that I can use BUT I would like to use the scope as
well.
I
I am having a hard time getting the XG3 and my PC to communicate with each
other.
Here is what I havethe XG3 and the KUSB cable.
I have hte FTDI software installed and it talks to my KX3 via a KUSB no problem
and has been doing this for close to a year.
The XG3 (with a separate KUSB cable)
I have a fully assembled and functioning perfect XG-2 it's a 3 band 1-uV/50-uV
receiver test oscillator.
Price is 50.00 including shipping.
Mike
VE3WDM
__
Elecraft mailing list
Home:
I have had the KXBC3 installed for some time now in the KX3. I have not been
able to read the voltage reading in VFO B for about 2 weeks now. Just thought
it was a menu setting and was going to look into it later. Today is field day
and the internal batteries were charged last night. I now
Is there anyone thinking about putting their LP Pan and sound card such as E-MU
0202 up for sale. I am looking for one for my Elecraft K3. MikeVE3WDM
__
Elecraft mailing list
Home:
I have decided to sell my Elecraft K2 setup. I have the KX3
and K3 and have found the K2 is sitting on the desk doing absolutely
nothing. The rig can be used for
portable operation and as a100 watt base station. The rig and all accessories
were built by me. The K2 was
aligned and
I have decided to sell my Elecraft K2 setup. I have the KX3
and K3 and have found the K2 is sitting on the desk doing absolutely
nothing. The rig can be used for
portable operation and as a100 watt base station. The rig and all accessories
were built by me. The K2 was
aligned and
On page 48 of the K2 manual the S-meter alignment is done. I was able to
get the Cal S low done just fine. When I then moved on to the Cal S HI (
with the RF gain fully counter clockwise) I was not able go get any
segments of the S meter to light up. I adjusted the VFO full circle and
not one
On page 48 of the K2 manual the S-meter alignment is done. I was able to get
the Cal S low done just fine. When I then moved on to the Cal S HI ( with the
RF gain fully counter clockwise) I was not able go get any segments of the S
meter to light up. I adjusted the VFO full circle and not one
Good evening all, just making my way through the K2 build and had was wondering
about some resistance check results. On R115 and U1 pins 4,9,10,28 I am getting
readings in the range of 3.9 mega ohms to 5.4 mega ohms. The results sheet
advise of results in and around 20k. In the past I have
Good afternoon all, I was wondering if there was a button combo that cleared
the KX3's ATU memory? I know there is one for the K3 just wondering if there
also is one for the KX3.
Mike
VE3WDM
Good morning all, just wanted to resurrect an idea that has been tossed around
the reflector. The combination of mouse-based point-and-click tuning within
the P3's fixed-tune mode. I am a 100% CW op and this would be great to have if
possible. Point and click feature would be great during a
Good afternoon all, while operating my KX3 when the keyer is released I hear a
ping in my headphones. It happens on 21, 28 and 18Mhz, I have changed the
headphones and also put the KX3 on a dummy load as well. Not sure if I
inadvertently tuned on some type of option?
Mike
VE3WDM
On the control board check out on page 22 of the Elecraft manual I did the
resistance checks but on U6 pin 29 I got 95 K and on U6 pin 30 I got the same.
The acceptable range is 70-90 K I was wanting to make sure all is well before
assuming?
Mike
VE3WDM
I was on my K3 this evening and I have the P3 with the external monitor as
well. My PC has two monitors one being the AOCe235F and the other is the
AcerX233H. As I was watching my K3 signals on the external monitor the PC
monitors went into sleep mode and so did lost of RFI on the P3 external
I have LogiKit CMOS4 keyer for sale it's in great shape and works like a
charm.so why am I selling it you ask??? For my birthday my YL purchased the
WKUSB as a kit and a little birdie told me the wise thing to do is sell the
Logikit and keep the WKUSB!
Price is 60.00 shipped if you would
Good morning, I was wondering if Elecraft was thinking/ thought of implementing
( if possible) a trickle charge addition to the KXBC3 module for the KX3 rig?
I know this has been brought up in the past was not sure if it was address or
soon to be?
Mike
VE3WDM
Good afternoon all, I installed the KXBC3 in my KX3 last night and it had no
error messages or problems.up until now.
Here is what I did and what is happening.
1. Batteries that are installed are Ansmann 2850 MaH NiMH brand new min charge
on them if any.
2. Put time on KX3 for 16 hours of
Well Elecrafters I am getting impatient (in a good way not bad) waiting for my
back ordered KXBC3 charger and KXPD3 keyer. The serial number of my KX3 is
1990how close am I to a Christmas gift of my last remaining items?? To be
honest it is disheartening to read of new orders shipping and
Well Elecrafters I am getting impatient (in a good way not bad) waiting
for my back ordered KXBC3 charger and KXPD3 keyer. The serial number of
my KX3 is 1990how close am I to a Christmas gift of my last
remaining items?? To be honest it is disheartening to read of new orders
shipping
Good morning, I am the proud owner of a KX3 and was wanting to give the SDR
capabilities of the radio a go. I own an Imac computer so I am in the market
for Mac friendly SDR software. The only program I have come across is DL2SDR's
program
1. Has anyone used this program and if so what
Im in the CQ WW and some are just sending at bullet speed have noticed K3 and
P3 are not decoding anything. On the K3 just the VFO freq is displayed it does
not even attempt to show code. I have the test dec set to 30-90 (have tried
other settings) and threshold has tried all as well. Is there
I ordered K6XX's CW indicating light for my Elecraft k2 and it has some
(resistors and caps) SMD's I am going to have to work with. I have been
reading on the internet about ways to instal these comments. I have read about
using solder paste as this helps to place them and kinds steady’s them
For those who have purchased or are thinking of purchasing the Elecraft KX3 in
the kit version I have made 4 videos. They are not step by step but I try to
highlight the challenges that I had while bringing the KX3 to life!!
The link is below if you want to check them out.
Mike
VE3WDM
This is a question for the group and not Elecraft staff.not that I don't
value their input but I want to be a good ham op and not do what I am told not
too. My KX3 serial number is 1990 and the KXPD3 and KXBC3 were put on back
order. I know the folks at Elecraft are shipping these items
I had received some emails from Gary and Vic at Elecraft today regarding my
failure to complete the transmit bias test on the KX3. The trouble turned out
to be my power supply to the KX3 was not putting out the current needed to run
the test. I was needing in the ball park of 3 amps from the
I have noticed on the Elecraft site that for support they have a K3 specific
email and then a support email. Would be an idea to add a KX3 email specific
emailjust a thought. I will mention that to the support team when I call
about an issue on Monday.
Mike
VE3WDM
Good evening all, now that the KXBC3 charger is shipping and we all are
awaiting it's arrival!! I have been doing some research online for some NiMH
batteries I came across and ordered the Ansmann 2850 mAh AA batteries. These
batteries are from Germany and offer a 2 year warranty. Unlike some
I was just wondering if I am the only one having troubles with one of the cal
testsnamely the Transmit bias test. It is just not working for me. I posted
on this site, Elecraft's nabble and even sent an email to Elecraft. All post
have netted no comments at all. In the past I have had
I was attempting to run the transmit bias test and all that is happening is
both for CW and SSB when I press XMIT on the LCD I get a reading of .04A
ranging up to .09A and Q6 below that. The instructions say this test is to
take between 3-10 sec my test was into 1.5 minutes. The LCD just
After completing the KX3 serial 1990 I have the two number 4 washers leftover.
They are on page A4 of the assembly manual sixth down from the top. I did a
search in the PDF manual for them and the only result that comes back is page
A4 where they are listed as a part. MikeVE3WDM
Good afternoon all, almost done putting my KX3 kit together I have the roofing
filter installed and when asked to on page 32 of assembly manual to fit the top
and bottom covers of the KX3 I have a fitting issue. The top left is not
fitting flush as is the top right corner is. It seems to me
I have been emailing a fellow ham regarding some WSPR troubles. The rig is an
Elecraft K3 and it seems to be stuck in TX and will not switch back to receive.
The rig has to be shut down and restarted to clear the problem. I did have this
same problem with WSPR and my K3 some time ago but am
I have a small desktop regulated power supply rated at 13.5 volts DC nominal,
3.0 amps max continuous, 5.0 amps max. Can I use this to run the KX3 while it's
desktop? The max output will on the KX3 will be 5 watts QRP.
Mike
VE3WDM
The case was sold but the sale did not work out so the unit is back on the
market.
Pelican 1200 case black with foam NEVER USED great for KX1, K1, or KX3. Was
purchased for digi camera but never ended up keeping the camera. If you would
like pictures I can send them to you.
60.00 includes
I purchased the KAT100-1 kit and before it was built I decided to order the EC2
enclosure to mount the KAT100 and KPA100 units in it. I have a never used
KAT100-1 complete case along with a pair of the anti slide brackets. NOTE this
kit does not include the hardware such as 2D fasteners or
With many thanks to an email from a fellow ham Steve I was informed the case
can be purchased not including shipping for 40.00. At Pelican.com the case
ships to most states for a total of 54.00.
The price of the Pelican including shipping is now 40.00 and no longer 60.00. I
was going from the
Pelican 1200 case black with foam NEVER USED great for KX1, K1, or KX3. Was
purchased for digi camera but never ended up keeping the camera. If you would
like pictures I can send them to you.
60.00 includes shipping in Canada and U.S.
Mike
VE3WDM
My KX3 is on order and should be in around October according to the latest
Elecraft shipping dates. I have the K3 running on Windows and it works great.
My wife has given me an Imac desktop with the 27 inch screen (she is fantastic
and spoils me). I want to run the KX3 on the Mac but was
1 - 100 of 148 matches
Mail list logo