.
Does this sound like the oscillator at X1 is not firing? Is there a
good way to know?
73
Neal Campbell K3NC
[EMAIL PROTECTED]
telnet to our DX Spotting clusters at: dxc.k3nc.com, ports 12001 and 23
Devoted to Dogs: How to be your dog's best owner
Great Dog Book at www.abrohamneal.com
I am still debugging why the apparently functioning KPA100 has no
negative bias going into U4 pin 8. Here are the measurements of U4
pins as well as all of the diodes (in rx)
Any ideas?
Neal
U4 voltages (rx)
P1 = 13.2
P2 = -0.014
p3 = 0
p4 = 0
p5 = 0
p6 = 0
p7 = 0
p8 = -0.214
p9= 0
p10= 0
p11=
I have been friends with previous employees/manager of the ham gear
stores and all is not what it seems to the user community. They make
very little markup today on rigs, they make their money on the small
things (cables, plugs, books, etc) so their profit incentive is to get
you into their store
I purchased this encoder from CUI as a replacement for the stock encoder so
that it would tune faster in the 10Hz mode. The stock encoder is 25 CPR so
it tunes 1Khz per revolution in 10 Hz mode. With this encoder, you will tune
3 Khz per revolution in 10 Hz mode. Will sell for $25 and that
I have decided to slim down the shack in order to buy the latest and
greatest, so offer my K2 for sale. It is serial nr 4490 and has the
latest firmware. It has been checked and professionally aligned by
Wilcox Engineering (and the report will be sent with the rig). The K2
has:
- KPA100
- KDSP2
-
to accomplish this?
Thanks
Neal Campbell K3NC
[EMAIL PROTECTED]
telnet to our DX Spotting clusters at: dxc.k3nc.com, ports 12001 and 23
Devoted to Dogs: How to be your dog's best owner
Great Dog Book at www.abrohamneal.com
___
Elecraft mailing list
One great place to look is www.govliquidation.com.
Its an auction site for the liquidation of government assets. I
bought a 465B in great shape for 65 bucks. Its a little more involved
than e-Bay (but only a little). The involvement is that you have to
arrange for a pickup and shipment of
I may not fully understand so excuse if I make no sense.
The plug coming out of the microkeyer represents your computer in the grand
scheme of things. So with your existing cable (as I assume works today)
where you would normally plug into the computer you would now plug into the
db9 shell coming
I do not know how many of the reflector's subscribers have visited Tom's
web-site. I have visited it before but after this exchange I spent an hour
on it today reading all of the instructional files. This is an incredible
resource. Strongly recommend all to visit (or even re-visit if its been a
I had a hard enough time finding a magnifier for the normal components (yes
I am that old!) so SMDs are way beyond my meager eyesight and shakey hands.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of EricJ
Sent: Tuesday, July 19, 2005 5:42 PM
To: 'Mike
Hi all,
Not being a particularly active ham on SSB, I have toyed with it a bit on K2
4490 but bought the MD-2 mic and figured I would 'tune' the BFO to give me
decent audio. I got a couple of 'horrible audio' reports which also drove
the decision.
I tested the BFO setting using an Orion fed into
: Thursday, June 02, 2005 11:35 PM
To: Neal Campbell; elecraft@mailman.qth.net
Subject: RE: [Elecraft] Bad LSB audio
Neal,
It may be that your LSB BFO is not currently set anywhere close to the
correct setting, and your efforts are being confounded by that situation.
I recommend that you first re-do
Go to google and do a search for Spectrogram. I found the free version
on some German site and it matches the version that is used in the
instructions on the Elecraft web site. The new version I could not
figure out!
73 de Neal
On Mar 8, 2005, at 9:56 PM, Ken Kirkley wrote:
Do I remember
Thanks Lyle,
Its not RTC is just dashes and any AFIL setting is 'not installed' so I
will check point 6.
I will let you know!
On Mar 4, 2005, at 11:41 PM, Lyle Johnson wrote:
Hello Neal,
I cannot get the initializing led to flicker on my kdsp2.
When I do the voltage checks, I really
I have seen the 'cheat sheet' that was graciously posted on the
elecraft website but has anyone ever built an operators manual for the
K2?
It would have the setup and operating sections of the K2, KPA100 and
all of the modules. Today I have to look through a bunch of things
(although its
Hi,
I cannot get the initializing led to flicker on my kdsp2. When I do the
voltage checks, I really cannot make sense of it, versus the schematic.
I have double checked that the right parts are installed in the proper
orientation, re-checked for bridges, etc. I have checked that none of
The Anderson Power plug on my KPA100 has some play in it and when it
moves slightly, power drops. Has anyone seen this before and what can I
do to make it stable?
Neal
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
I assembled my kpa100 during the week, what a nice experience!
The functional operation of it is fine, aligned well, tx audio is good,
temp, etc. all fine.
The problem I am experiencing is with the audio.
If I plug the audio cable only into the k2, audio is as good as the
original. But if I
Being one of those clogging the reflector recently with cries of help,
let me put it in context.
In building the base kit I experienced only 3 problems:
I had a poor solder joint that kept me from getting the right AGC
voltage but the troubleshooting guide led me to it almost immediately.
The
Hi all,
I am trying to install the KSBS2 into my K2.
Problem symptoms are that I get the Hi Current warning, plus I get no
variance on my separate receiver when trying the fine balancing.
The rest of the alignment went okay, SSBA on BAL gave me good nulls
with tweaking R1 both on USB and
Hi all,
Thanks for giving some ideas!
I checked the resistors on the bottom of the ssb board, they are all
correct. I must say that trying to identify parts on the top of the
board is a real challenge, its so stuffed that its almost impossible!
Don, I redid the output amperage at 10 watts:
Second qso with HZ1EX on second call!
I am so excited to see this amazing little box go live!
Thanks so much to the reflector for help around the rough bits. Also
thanks to Scott for continuing to send me the parts I lost!
73 de Neal
___
Elecraft
Hi all,
The symptom of my problem is:
1. when setting k2 power to 5 watts, I get a reading of 2.2 amps with
abt 0.8v drop
2. when looking at power output with an external wattmeter, 5 watts
reflecting on the external wattmeter shows as 3.8 on the k2. Similarly,
10 watts on external wattmeter
The good news is that I did a diode dance, had the rf probe diode in
D9, had the real d9 substituted for a 4148 and a 4148 in the rf probe.
Will swap them around and redo the tests!
Neal
On Feb 13, 2005, at 6:00 PM, Vic Rosenthal wrote:
Neal Campbell and Sarah Ferrell wrote:
The symptom
amount based on the can/capacitor.
73 Neal
On Feb 13, 2005, at 9:07 PM, Neal Campbell and Sarah Ferrell wrote:
The good news is that I did a diode dance, had the rf probe diode in
D9, had the real d9 substituted for a 4148 and a 4148 in the rf probe.
Will swap them around and redo the tests
I am just at the 40m L1/2 alignment for my K2.
On rx with the lcd set at nite, I show 13.6v @ .18a.
Using an external analog wattmeter into a dummy load, I measure at 5
watts 12.9v and 1.8a. Also, the display shows the power output at 3.5w
instead of 5. When I tune the power output control so
I am progressing through debugging the bad resistance reading between
ground and the collector of Q7 on the RF board. I have it up to 900
ohms now. The manual says '500' is a passing resistance. What is
'normal'? Is 900 ohms a sign that all is well?
73 de Neal
Its an obvious direction that 2 K2s (KK4?) would be a great,
desktop-friendly SO2R setup. Anyone with recommendations on the best
way to do this (or to simulate the 2 RX/1TX capability of the 7800,
Orion, FTDX9000)?
___
Elecraft mailing list
Post
Well, just in case anyone searching the archives for hints on a similar
situation, I had a solder bridge on the top of the RF board between the
case of Q5 and the lead from R44 that fed from the bottom, just
impossible to see without magnification, etc. Probably no one will
make the same
Hi all,
I have been through the archives so I know this has been asked and
answered a few times but I still am not making much progress on this.
The problem is that my resistance test for Q7 collecter is not correct.
With the common probe on ground and the positive probe of my DVM
measuring
Hi,
I am just at the first alignment and test stage of my K2. Everything
checked out just fine except the step where I am to adjust R1 on the
control board for 3.80 v on pin 5 of U2. The highest I can get the
voltage to go is 3.38v. Is this something to worry about? If so, any
clues?
My best wishes to everyone on the reflector. I started building my K2 a
month ago and it reminds me of the days when almost everyone had build
their equipment and every ham was a mentor. Over the years I have
enjoyed the increased access that the internet gave us but got a little
jaded when
32 matches
Mail list logo
