Re: [Elecraft] K4 pre order

Eric, now that it looks the K4-F is finally on a production schedule, any hints on when there will be a K4-K ?? Thanks, Neil, KN3ILZ On 4/13/2023 3:18 PM, Eric Swartz wrote: Hi Rick, It looks like your K4D shipped today. :-) We're also working hard to ship a lot this week and next so we

Re: [Elecraft] SignaLink and KX3

始信息 发件人： Neil Zampella 日期: 2022/8/20 22:13 (GMT+08:00) 收件人： k2vjk , elecraft@mailman.qth.net 主题： Re: [Elecraft] SignaLink and KX3 You really don't need a Signalink to do digital modes and the KX3.   All you need is a good USB sound card, the audio cables for Tx & Rx (St

Re: [Elecraft] SignaLink and KX3

You really don't need a Signalink to do digital modes and the KX3.   All you need is a good USB sound card, the audio cables for Tx & Rx (Stereo), and the KXUSB cable for CAT control. The setup is described in Cady's KX3 book. Neil, KN3ILZ On 8/15/2022 6:10 PM, k2vjk wrote: I called

Re: [Elecraft] Anyone try K4 with JTDX or WSJT-X?

Just checked with WSJT-X v2.3.1 (and v2.4.0-RC4 beta), they both have the latest Hamlib updates, and the K4 is listed. Neil, KN3ILZ On 4/7/2021 2:49 PM, Paul Van Dyke wrote: Andy Yes, but Before I left on my business trip the K4 designation was not there yet. But it worked fine with a K3S..

Re: [Elecraft] K4: Coolness factor meets production complexities

This is why I'm going to patiently wait for the K4 kit release, along with putting money aside for it. I suspect that along with the other engineering challenges, y'all are working on putting together the instructions for a proper kit build. While it won't be as complex as a K2, it will

Re: [Elecraft] Nifty Manuals

Hi Mick, there was no link to any site for this.  Could you copy and paste ? Thanks, Neil, KN3ILZ On 1/4/2021 1:07 PM, Mick Hall wrote: These are still available new in the UK at Elecraft K2 Plus Options Nifty Mini Manual | | | | | | | | | | | Elecraft K2 Plus Options Nifty Mini

Re: [Elecraft] KX2 & FT8

The one question I didn't see asked was you have the rig in DATA-A mode, right? Neil, KN3ILZ On 12/1/2020 7:04 AM, Mark Moeller wrote: I am working to get my KX2 setup for FT8 and appreciate any help. My setup includes: KX2 connected to a G5RV antenna, Windows 10 laptop, USB Sound Card, Mic &

Re: [Elecraft] Firmware development

Of course, as mentioned previously in this thread, large companies have funds that they can invest in personnel to do the development, so I would expect that Kenwood would be able to assign personnel quickly to handle such issues. Neil, KN3ILZ On 11/25/2020 10:25 AM, Andy Durbin wrote: "Name

Re: [Elecraft] K4 built-in operating manual now available

FYI:   the Elecraft website also has PDF versions of the K4 manual that you can print right now. Neil, KN3ILZ On 10/8/2020 3:54 PM, Nigel Lemaire wrote: I kind of like that the K4 has a built in manual, which is no doubt updated as required AUTOMATICALLY. Is there a provision to print out the

Re: [Elecraft] K4 sound card capability

Terry, the K4 will connect with a USB cable to your PC, you will not need a Signalink.  It will have a much better soundcard than the Signalink provides.    Since the K4 manuals are now online, you can download the PDF and see for yourself. FWIW .. you don't need the Signalink with the KX3,

Re: [Elecraft] No Tx audio after WSJT upgrade

Actually ... WSJT-X only uses what windows tells it is available.    After Windows updates its been found that Windows will scramble the audio devices, especially if they are USB devices. What has been found to work is to RENAME the device you use in the Sound Control Panel.  Bring up the Sound

Re: [Elecraft] K2 Rig Control Software

DXLab's DX Commander works fine with the K2, and integrates well with DXKeeper log program, along with the rest of the DXLabs suite. I use Commander with the K2 to run WSJT-X modes with Commander as the rig. Neil, KN3ILZ On 8/26/2020 3:15 PM, Dave Van Wallaghen wrote: Hey Denny, I use the

Re: [Elecraft] K2 latching relays and filter alignment

Albin, Elecraft does have these relays.   I had to replace one in my K2, and I ordered via the website. Neil, KN3ILZ On 8/24/2020 10:35 AM, Albin Stigö wrote: Hi, I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH who sadly passed away earlier this year at age 90. It

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

I'm assuming that all the Zoom presentations will be available, since I'm assuming that people like me won't be able to view some of them live.   I'm very interested in the Classic Line presentation, along with the K4 presentation. Thanks, Neil, KN3ILZ On 8/7/2020 1:08 PM, Wayne Burdick wrote:

Re: [Elecraft] WTB: *****NIFTY MANUAL FOR K2*****

Not to mention that they don't have it listed any longer, even in the discontinued manual list. To the original poster, you can try emailing them at supp...@niftyaccessories.com they may be able to help you with an

Re: [Elecraft] K4 cables

Probably not .. but you can get CAT6 cable (which will work with CAT5 connections) at Amazon at various cable lengths if you don't have one lying around. https://tinyurl.com/ycrsycwg Neil, KN3ILZ On 6/15/2020 11:12 AM, Joseph Trombino, Jr wrote: Howdy Gang. Does anyone know if the K4 will

[Elecraft] KAT100 No Longer Available, was KPA100 No Longer Available

Sorry for the confusion ... wasn't thinking when I typed out the subject line.  Thinking KAT100 typed KPA100, then sent it  :( Neil, KN3ILZ On 6/4/2020 3:32 AM, Neil Zampella wrote: Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued.   I'm

[Elecraft] KPA100 No Longer Available

Hi all, I saw that the K2 100w tuner accessory, the KAT100  is no longer available and discontinued.   I'm guessing its due to the permanent unavailability of a through part.    I'm wondering if Wayne or Eric could comment on this, and if there's any suitable replacement for that tuner? Neil,

Re: [Elecraft] Elecraft Digest, Vol 193, Issue 29

To unsubscribe .. you need to follow the directions at the bottom of every message: To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to

Re: [Elecraft] K4???

Wayne, quick question ... I am giving very serious consideration to a K4, but the kit version.   Assuming the new timeline on the factory version works out, should we expect a kit by Sept 2021? Thanks, Neil, KN3ILZ On 5/16/2020 1:15 PM, Wayne Burdick wrote: Mike, K4HDs will take longer. We

Re: [Elecraft] Where is Elecraft Support ?

Exactly Jim.   Elecraft had to discontinue their 60 meter adapter (K60XV) for the K2 as a key part is no longer available, and it would require a major board change to continue providing the same functionality. Evidently they no longer sell enough of that option to make it fiscally possible.

Re: [Elecraft] Elecraft Digest, Vol 190, Issue 22 Open Office etc

Jim if all you're using Open/Libre Office for is creating PDFs, you may want to look at the PDF printer driver from Software995.com.    Its free (with ads) but if you want to pay the $9.95, its yours for life.    I use it for all my work, and I create a LOT of PDFs as records of transactions in

Re: [Elecraft] anyone recommend where to buy a SERIAL to USB cable for a k3

FWIW .. he's looking for a K3 cable .. DX Engineering only carries the KXUSB cable for the KX3. Neil KN3ILZ On 1/25/2020 7:00 PM, Dave wrote: I ordered my KXUSB-A cable from DX Engineering. Closer to me, faster shipping. I see you have a 6 area call. If you are in CA then ordering from

Re: [Elecraft] K2 FT8

I've used my K2 to work WSJT-X modes for a year now, using the external speaker audio out, and a cable connected to the mic for audio in. They connect to a $10 USB soundcard from Amazon.The rig is connected using the AUXBUS serial cable, to a USB adapter to the computer, which runs DXLabs

Re: [Elecraft] KE6D K2 Software

OK ... you're talking about the K2"S" software ... kinda confusing there for a sec. The program has not been updated (as far as I can tell) since 2003.    Have you tried running the program under COMPATIBILITY MODE?   Right click on the software's icon to bring up the menu and select PROPERTIES. 

Re: [Elecraft] K2 Alignment & Test Part II

Don, I installed the 12pF cap as suggested didn't help, so I'm going to request a replacement Q19. Thanks, Neil, KN3ILZ On 12/25/2019 3:24 PM, Neil Zampella wrote: Don, Thanks, I'll work on that tomorrow and let you know how it goes. Merry Christmas!! Neil On 12/25/2019 11:19 AM, Don

Re: [Elecraft] K2 Alignment & Test Part II

Test, then get a replacement Q19 from pa...@elecraft.com. Merry Christmas everyone. 73, Don W3FPR On 12/24/2019 6:19 PM, Neil Zampella wrote: Hi, Started to do the Align/Test Pt II, and properly saw the correct frequency of 12090 +/- 30 kHz.   Tried the next part to adjust the Reference

[Elecraft] K2 Alignment & Test Part II

Hi, Started to do the Align/Test Pt II, and properly saw the correct frequency of 12090 +/- 30 kHz.   Tried the next part to adjust the Reference Oscillator using my other K2 as the receiver and was able to hear the oscillator at 3999, but C22 would not adjust to a zero-beat. OK ... so it

[Elecraft] K2 Power Switch modification

Just a heads up: I'm putting together another K2, and planning to build this as a base rig keeping it all low power with the battery option. I got to the part where I'm setting the initial parts on the RF board, then plugging in the front board, and the control board, to the RF board.

Re: [Elecraft] [K2] USB version for USB to serial adapter

I purchased a serial to USB adapter from Amazon that had the FTDI chipset, and have had no problems with CAT control to the rig. I've added a link to Amazon for that adapter, its only $12 but it works well. https://www.amazon.com/gp/product/B00BUZ0K68/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8=1

Re: [Elecraft] FS K2-100

What's the Serial Number? On 11/13/2019 3:50 PM, Tomy Ivan wrote: I have a very nice working K2-100, 160 - 10 meters, Serial 57xx Has the following: Upgraded Metal tuning knob with dimple. KAT2 Automatic Antenna Tuner KSB2 SSB Adapter K160RX 160 Meter Adapter with RX Antenna Switch KPA100 100

Re: [Elecraft] [K2] K60XV - No longer available?

FWIW .. this question is for Wayne or Eric,  could the K60XV be redesigned using currently available components, or perhaps something that would allow easy use of the transverters? Neil, KN3ILZ --- This email has been checked for viruses by AVG. https://www.avg.com

Re: [Elecraft] K2 - Lost 40m Tx after install of K60XV option

, KN3ILZ On 8/5/2019 7:43 PM, Neil Zampella wrote: Don, I don't see 60M working either.    I'll check these tomorrow after work. Neil On 8/5/2019 2:20 PM, Don Wilhelm wrote: Neil, Does 60 meters work, but not 40 meters? The only things that could 40 meters to fail after installing the K60XV are: 1

Re: [Elecraft] K2 - Lost 40m Tx after install of K60XV option

- it will be marked either 4.7 or 479. 2) Relay K1 not working properly, check the orientation and soldering. 3) P2 and/or RF J15 not installed properly. 73, Don W3FPR On 8/5/2019 11:14 AM, Neil Zampella wrote: Hi all, need some advice.   I have a K2, and it was working fine.   Then I put together

[Elecraft] K2 - Lost 40m Tx after install of K60XV option

Hi all, need some advice.   I have a K2, and it was working fine.   Then I put together the K60XV option and installed it.   Messed something up as 40M Tx went away.    The rig switches to Tx, but I do not see any power coming out of the system. Any suggestions on what I messed up :( Thanks,

Re: [Elecraft] KX3 and the Sigmalink USB

from my iPhone ...nr4c. bill On Jun 9, 2019, at 8:24 AM, Neil Zampella wrote: FWIW... you don't need a signalink to connect the KX3 for digital modes. All you need is the KXUSB cable for CAT control (& PTT), and 3.5 cables for the MIC and PHONO jackts to the Line out/speakers and

Re: [Elecraft] KX3 and the Sigmalink USB

FWIW... you don't need a signalink to connect the KX3 for digital modes. All you need is the KXUSB cable for CAT control (& PTT), and 3.5 cables for the MIC and PHONO jackts to the Line out/speakers and line in on the computer. Very simple, and no having to worry about switching about jumpers

Re: [Elecraft] KX2 & FT8

, 2019 at 3:12 PM Neil Zampella mailto:ne...@techie.com>> wrote: The only problem is this configuration uses a Signalink, which is really not needed with a KX2 or KX3.   A cheap Sabrent sound dongle ($15 or less) from Amazon works great, and keeps the computer sounds se

Re: [Elecraft] KX2 & FT8

The only problem is this configuration uses a Signalink, which is really not needed with a KX2 or KX3.   A cheap Sabrent sound dongle ($15 or less) from Amazon works great, and keeps the computer sounds separate from the WSJT-X audio output.   CAT control would be through the KXUSB cable. Neil,

Re: [Elecraft] Reflector format

PMMail ... dost thou be an old OS/2 user ?? :) Neil, KN3ILZ On 5/21/2019 4:23 PM, Jim Brown wrote: On 5/21/2019 12:25 PM, Neil wrote: It is a pity that the present format of the reflector does not allow a person to mouse click on a particular post so that one does not have to scroll thru

Re: [Elecraft] K4 price?

All I want to know ... when can I put down a deposit for the kit :) Neil, KN3ILZ On 5/16/2019 4:35 PM, Wayne Burdick wrote: It’ll all be on our website tomorrow. Not your grandpa’s SDR :) 73, Wayne N6KR elecraft.com --- This email has been checked for viruses by AVG.

Re: [Elecraft] [K2] WSJTX -W10 Rig Control Error - PROBLEM SOLVED

FWIW ... I use DXLab's DX Commander with my K2, and have full CAT control.  Not using a Rigblaster, but connecting through the RS-232 cable, CAT works fine.   I've worked a DXPedition using this setup, and the Fox/Hound mode worked perfectly. Neil, KN3ILZ On 5/14/2019 1:39 PM, Phil Kane wrote:

Re: [Elecraft] [K2] Rig Control Error

Phil, I've got my K2/100  running under Win10 using DXLabs Commander.    I could never get WSJT-X running the K2 directly using the built in Hamlib settings, or with Omnirig or Flrig.    It works fine, and I was able to create custom controls for Commander to adjust the power if I'm running

Re: [Elecraft] Rework Eliminator Gone in 5 minutes

I need to change from a digest version of the list ... :( Neil, KN3ILZ On 4/15/2019 1:41 PM, EricJ wrote: Free Rework Eliminator "sold" in 5 minutes. Free really works! Eric KE6US --- This email has been checked for viruses by AVG. https://www.avg.com

Re: [Elecraft] Will there be a K4

FWIW .. the FT8 code is not 'open source' it is under the General Public License v3.   According to the GPL v3 FAQ: "You cannot incorporate GPL-covered software in a proprietary system. The goal of the GPL is to grant everyone the freedom to copy, redistribute, understand, and modify a program.

Re: [Elecraft] K2 VCO Alignment T5 L30

Tom, welcome to the club.   I think anyone who has put together a K2 has such stories.   In my case I had installed U4 backwards and did not notice it as the chip has a very pronounced 'dimple' on one end which (for some reason) made me overlook the notch on the other end.    I spent a week

Re: [Elecraft] Suggested prices?

Michael, If I were still living in Ashburn, I'd be down to your house with a check for around $800.00 in about a half hour for the K2.  New it costs about $1,000.00, the tuner an additional $220.   You didn't give the Serial Number of the rig and I'm guessing its a KAT2 tuner? As someone

Re: [Elecraft] KX3 and RPi DRAWS hat?

FWIW .. I just run the Raspbean .deb of WSJT-X v2.0, the KXUSB for CAT control,  and a cheap USB soundcard with my KX3.   The hat does me no good, as I'd have to find an adapter cable to use the DIN connectors.   The USB soundcard just cost me $9.00 or so. Neil, KN3ILZ On 1/2/2019 7:42 PM,

Re: [Elecraft] Ideas for an FT8 Radio

Carl, you tell that to Joe Taylor, who himself has said he uses the power it takes to make the contact, especially on EME and Meteor Scatter. It is not a low power mode.  For some people using 500w from California results in a - 19 report from  Israel.    That is a weak signal. You use what

Re: [Elecraft] Ideas for an FT8 Radio

As long as the developer is using any part of the WSJT-X code it cannot be added to closed source firmware.    It doesn't matter that it can be done. It would be in violation of the GPL Neil, KN3ILZ On 12/30/2018 8:59 PM, John Harper wrote: Here's the thread - scroll down to message #27527:

Re: [Elecraft] Off-topic, but I need help.

FWIW .. I've got my K2/100 running FT8 right now ... just in time for the next RTTY contest where its a new mode :) Neil, KN3ILZ K2/100 SN: 7788 KX3 SN: 6596 On 12/29/2018 7:05 PM, Phil Kane wrote: On 12/29/2018 12:14 PM, W2xj wrote: It is just that too many do not seem to have fully

Re: [Elecraft] K2 100 Tuner question

You know, the point is moot.   I would assume that Wayne & Eric looked at getting a replacement vendor, but then after getting bids based on the sales history of the EC2, they determined that it would not be feasible at the price point they wanted to sell them at. Now, it would be great if

Re: [Elecraft] K2 with KPA-100

Gene ... if you were planning to buy a K2 kit,  you should do that.   It was a pleasure, and a lot of fun to put together.   The KAT2 will not work with the KPA100 option for the reason Don pointed out also, and Don correct me if I'm wrong, I'm not sure its rated for more than 20w. The

Re: [Elecraft] Opportunism, bravery, insanity: putting the "eXtreme" in Elecraft's KX and AX gear

FWIW ... easier said than done, there's a lot more to it than there is to CW, RTTY, or even PSK. Neil, KN3ILZ On 12/19/2018 9:44 AM, Andy McMullin wrote: I’d vote for that idea too! Regards Andy, G8TQH On 19 Dec 2018, at 14:36, Bob N3MNT wrote: Maybe add WSJT-X capability to PX3 --

Re: [Elecraft] Opportunism, bravery, insanity: putting the "eXtreme" in Elecraft's KX and AX gear

It went QRT in April when it returned to Hawaii.  If they send it out again, it'll probably run 2.0 :) Neil, KN3ILZ On 12/18/2018 5:02 PM, Bob N3MNT wrote: How about KH6JF/MM? Is KH6JF/MM running 2.0 or 1.9 ? -- Sent from: http://elecraft.365791.n2.nabble.com/ --- This email has

Re: [Elecraft] Receiving Digest

John, I think you have to go to the 'mailman' page to verify your settings.  Look at the bottom of the page, where it says "Elecraft Subscribers", and enter your email address in the line that says 'To unsubscribe from Elecraft, get a password reminder, or change your subscription options

Re: [Elecraft] Flummoxed about my antenna

Mike, the reflector includes attachments to the digest (if that's how you get it), you just find the attachment with the post you want to reply to, double click on it, it 'should' open as another email.   You then click on the reply button... and write your reply. Does this help? Neil,

Re: [Elecraft] Chrome OS and Elecraft Utilities

A Chromebook will not run the utilities.    I'm fairly sure Chromebooks run on a version of Linux, but you're limiting yourself to a lot of 'cloud based' stuff. Look at a AMD powered laptop, a bit cheaper than an Intel, but you often get more bang for the buck. Neil, KN3ILZ On 11/30/2018

Re: [Elecraft] KX3/SignaLink issues....

Tom, I've been using my KX3 for digital work for years.  I second Don's advice about using the KXUSB cable for CAT control.  The Signallink is nothing but a external Sound Card, a very expensive soundcard. Since you already have it use it, but my advice on sound interfacing is this. 

Re: [Elecraft] Cableing for KX3 to HRD

1/16/2018 10:59 AM, Neil Zampella wrote: Nope .. just the KXUSB cable .. does it all. On 11/16/2018 9:34 AM, John Pierce wrote: Is there any special cableing required to use HRD software with a KX3? John, AD2F --- This email has been checked for viruses by AVG. https://www.avg

Re: [Elecraft] Cableing for KX3 to HRD

Nope .. just the KXUSB cable .. does it all. On 11/16/2018 9:34 AM, John Pierce wrote: Is there any special cableing required to use HRD software with a KX3? John, AD2F --- This email has been checked for viruses by AVG. https://www.avg.com

Re: [Elecraft] K3 FT8 Problem VP6D

Considering that Joe Taylor has specifically said that v2.0-RC3 will default to 77 bit messages in DXPedition mode and should not be used for any DXPeditions until after the final General Availability release; and VP6D on the website's FT8 operating procedure page asks that v1.9.1 be used

Re: [Elecraft] K3 FT8 Problem VP6D

FWIW ... K1JT in the FT8 DXPedition mode user guide specifically says, if you can't hear the DXPedition station, don't call them. Item #7 for hounds says: "Please do not call Fox if you are not receiving his transmissions. Do not call Fox if he issues a directed CQ (“CQ EU”, “CQ 7”, …) and

Re: [Elecraft] Worldwide Transceiver Survey

surprised that Yaesu and Kenwood are not ahead of Elecraft... but what does it matter anyway. I don't know a soul who would sell their Elecraft rig just because of the results of that "survey". Dave - K9FN On Wed, Oct 3, 2018 at 11:26 PM Neil Zampella <mailto:ne...@techie.com>>

Re: [Elecraft] Worldwide Transceiver Survey

Might have more to do with the fact that ICOM is a supporter/advertiser on that site .. LOL Neil, KN3ILZ On 10/3/2018 11:51 AM, Charlie T wrote: You know, I'll bet the reason Icom is #1 in this survey is just possibly, I'm going out on a limb here, they got more votes. Along the same lines,

Re: [Elecraft] CODEC UPDATE & CLOSE

Mike, I had heard anecdotal stories about Xfinity modems and ethernet connections to non-computer equipment.  I actually had one customer who had the problem, I took a spare Linksys router, and connected it between the Xfinity modem, and the equipment, and that fixed the issue for my

Re: [Elecraft] CODEC

Jim, I use PTT with both my K2 and my KX3, its just one additional USB connection to the PC.  The other is to my external USB soundcard which does audio for both. Neil, KN3ILZ On 10/2/2018 4:20 AM, Jim Brown wrote: On 10/1/2018 10:47 PM, Rick WA6NHC wrote: While thousands may use VOX

Re: [Elecraft] WSJT-X Band Following

One thing to add ... once you have the CAT control setup properly, you should change bands via WSJT-X, as it will control the band changes on the rig, not the reverse. Neil, KN3ILZ On 9/12/2018 6:15 PM, Don Wilhelm wrote: Richard, You must have communications between WSJT-X and the K3S in

Re: [Elecraft] KX3 & Signalink Not Transmitting

Paul, I understand you're not wanting to use the PC Sound Card for Digi, as too often Windows sounds get into the transmission. FWIW .. you really don't need a Signalink with the KX3, but since you already have it I can understand your using it. In future if you want to take the KX3 for

Re: [Elecraft] [K2] Problem in setup for WSJT

Hi Don & Phil, I have my K2 setup for WSJT-X and found that the K2 settings in the Hamlib3 version in WSJT-X do not seem to work properly.   What I did was use DXLab's DX Commander as the rig interface, so it is talking to the K2, and then I have that selected as the 'rig' in WSJT-X. This

Re: [Elecraft] KX3/fldigi/USB sound card

Jim There is no added complexity of PTT using CAT at all.  The KX3 (and K2 for that matter) is just triggered by CAT commands, and not VOX. I've cot CAT control of PTT on my KX3 and K2, and all I had to do was plug in the K2's serial cable, and the KXUSB for the KX3. Even my IC-718 (now in

Re: [Elecraft] KX3 Using FLDigi to send CW

. Keep it simple. 73 and good DX KC4IM On Jul 5, 2018, at 9:27 PM, Neil Zampella <mailto:ne...@techie.com>> wrote: Bill, true, but he was asking about FLDidgi to send CW ... Neil, KN3ILZ On 7/5/2018 9:25 PM, Bill Rowlett wrote: With the Elecraft USB cable, your computer, you sen

Re: [Elecraft] KX3 Using FLDigi to send CW

Bill, true, but he was asking about FLDidgi to send CW ... Neil, KN3ILZ On 7/5/2018 9:25 PM, Bill Rowlett wrote: With the Elecraft USB cable, your computer, you send CW from your keyboard. The beauty of the KX3. On Jul 5, 2018, at 7:11 PM, Neil Zampella wrote: Aaron, you really don't

Re: [Elecraft] KX3 Using FLDigi to send CW

Aaron, you really don't need the Signalink, just two stereo audio cables (I used the ones in the KX3-PCKT cable set) a good soundcard in your PC or an external USB soundcard, and the KXUSB cable that comes with the KX3. This gives you the audio input/output you need, and the CAT control

Re: [Elecraft] FT8: "Magic radio"?

.. and if you add JT-Alert to the mix, it can do the QRZ lookup for you .. Neil, KN3ILZ On 7/3/2018 5:32 PM, Carl Yaffey wrote: On Jul 3, 2018, at 4:42 PM, Grant Youngman wrote: and don’t care to find out what the other guy’s name is or what he/she does when they aren’t punching at their

Re: [Elecraft] FT8: "Magic radio"?

Wes, you're taking that out of context.   The structured messages allow for redundancy if some of the original message is missing. The decoder can take the sync symbols so that the system can understand what type of message it is, it still needs the callsign and signal report. More details

Re: [Elecraft] FT8: "Magic radio"?

Mike, the only automation is in the middle of the contact, the operator has to be in front of the radio and computer in order to select a station to answer,  to begin transmission, and to log the QSO. None of that is automated in WSJT-X.   I cannot speak for other programs that have gone

Re: [Elecraft] FT8: "Magic radio"?

Andy, that's not right ... you have to be in the shack to make sure the system keeps calling as there is a 2 minute timer that will turn off your transmission. It is also suggested that if you don't get a reply back after the first two minute period, manually move the Tx freq. Finally,

Re: [Elecraft] Mail List Procedure Question

Lee, I get the digest too, and the Elecraft reflect includes the messages as attachments.  I'm not sure what email program you're using, as I use Thunderbird, and it does this. What I do is if I find a message I want to reply to I look at the list, get an idea of which message it is in the

Re: [Elecraft] K2: The green glow returns!

Wayne, you've almost made me want to order another K2 kit, even though I just finished one.    That said, if anyone has one they want someone else to build .. hi hi. Neil, KN3ILZ On 6/29/2018 5:21 PM, Wayne Burdick wrote: A few years ago, in a distant land known for its modular seafood

Re: [Elecraft] K3 and WSJT-X Split operation.

I can backup Don's statement about the K2. I have my K2/100 working reliably with the KAT100, connected to the PC using a serial to USB adapter.   Using the DXLabs DX Commander to control the rig, and interface with WSJT-X, PTT is through CAT. I can even work remotely using VNC, as the DX

Re: [Elecraft] k2 kit progress - Woops! Did I really do that?

Yep .. been there, .. done that ... waited for the replacement from California ... ... and as Richard points out, finished mine with timely advice from Don. FWIW .. its often faster to email to supp...@elecraft.com, as Don usually answers within a few hours or less. Neil, KN3ILZ On

Re: [Elecraft] K2 Build: Requesting Tips and Tricks

I just finished mine, and its loaded. I agree with all the previous advice, I picked up another 40 drawer parts cabinet for the parts, used them both,  and kept them in order that way.  Each board had its own area of the cabinets,Packing Box bag in one area,  Control Board in the next, RF

Re: [Elecraft] KAT500 Utility for MAC

Um ... just a heads up to the Elecraft folks, the older 1.13.6.17 version is the only version that's shown on the Firmware & Software page on the Elecraft website. Neil, KN3ILZ On 6/8/2018 8:23 PM, John Hiatt wrote: Does it have to be that old version? The current version is at:

Re: [Elecraft] Please unsubscribe from list

Rick .. you can do this by going to this URL and unsubscribing your self: http://mailman.qth.net/mailman/listinfo/elecraft On 6/5/2018 3:36 PM, Rick Chilcote wrote: __ Elecraft mailing list Home:

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

So you're saying that if you select K3 as the rig, and PTT to use CAT, you get error messages? FWIW .. FT8 mode DEFINITELY needs CAT control, especially if you're going to be chasing any DXpeditions as they will be using the Fox & Hounds mode.   It also makes sure that when you send spots to

Re: [Elecraft] Please take me off the Elecraft email list...

FWIW .. you can do it yourself by heading to this url: http://mailman.qth.net/mailman/listinfo/elecraft Neil, KN3ILZ On 6/3/2018 7:52 PM, Greg Neely wrote: Thanks. 73 KL4JN __ Elecraft mailing list Home:

Re: [Elecraft] Boldly OT: 6 meter Sporadic-E season and the FT-8 microjuggernaut

Considering that FT8 is done with 8-tone frequency-shift keying (8-FSK) at 12000/1920 = 6.25 baud.   I'd like to know how you can get that tone in CW? As far as the S/N threshold of the various WSJT-X  modes (from the protocol specs in the WSJT-X user guide): FT8  : -21 JT4A        

Re: [Elecraft] K2 Build: Options Advice

I just finished my K2 build, with all the options and Agree with Peter, there if you buy the options now, the K2 manual will point out just when you should install the various plugs and other components during the main K2 build. My advice, all the K2 manuals are online as PDF at the Elecraft

Re: [Elecraft] K2 - Issue after installing K60XV

he change KAT2 R6 to 470 ohms, there is a resistor provided in the K60XV kit for that. 73, Don W3FPR On 5/20/2018 11:27 PM, Neil Zampella wrote: Hi all .. has anyone seen this type of issue with their K2.   Before installing the K60XV, I had no problems seeing 10 w on 40 meters.   After ins

[Elecraft] K2 - Issue after installing K60XV

Hi all .. has anyone seen this type of issue with their K2.   Before installing the K60XV, I had no problems seeing 10 w on 40 meters.   After installing the K60XV, I can't get above 1 watt on 40 meters OR 60 meters. Did I screw something up, or is there some menu setting I missed when I

Re: [Elecraft] 15% discount KE7X book

Hi Fred, I've got your great KX3 book, and your 'assembling the KX3 line station' book (from Lulu).   Did you ever create a K2 book, and if so, is it still available anywhere?? 73, Neil, KN3ILZ On 4/6/2018 8:35 PM, Cady, Fred wrote: www.lulu.com has a 15% discount going

Re: [Elecraft] Macbook Pro, K3, FT 8 audio quits

Just a heads up ... on WSJT-X, there is an updated v1.9.0-RC3 on K1JT's website that WILL be needed for the 'Fox & Hounds' live test this coming Saturday, April 7th.   It has many fixes for the DXpedition mode. Neil, KN3ILZ On 4/3/2018 2:52 PM, John Stengrevics wrote: Sorry, I should have

Re: [Elecraft] Planning the next filters

To add something to what Don said: I've been using my KX3 with a USB soundcard (SoundBlaster SBx) for digital modes, and WSJT-X modes especially for about two years now. Before that I was using an IC-718 with the same soundcard. You don't need to spend over $100 for a specialty piece of

Re: [Elecraft] FT 8

Well I'll comment on it. 1.  its from 2009 ... and refers to the old WSJT v6 2.  Its obvious he has not looked at the code for the JT65 decoder Now the system can use the saved data from previous QSOs, but there are so many new users that the only thing its good for is to show whether or not

Re: [Elecraft] KX3 and WSJT-X Setup

I've had WSJT-X working with my KX3 for over two years now. I realize that you already have the Signallink, but try going directly to the PC instead and see if that fixes anything. All you need is: 1.   KXUSB cable for CAT control 2.   Two stereo audio cables for audio in and out.  I bought

Re: [Elecraft] Old Posts

PM Mail .. that brought back memories.  My OS/2 box was my main computer until it got to the point where I had no choice to move to Win7, because Win7 was as stable as OS/2 - eComStation.   However, by that time I had moved from PM Mail (which was no longer being supported) to Thunderbird,

Re: [Elecraft] How many K2's sold

I'm working on K2 s/n 7788 right now.  Just started putting capacitors on the Control Board, taking my time :) Neil Z, KN3ILZ On 1/30/2018 2:46 PM, Robert G Strickland wrote: As the subject says, how many K2's have been sold to date? ...robert

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

fter it arrives :) 73s, Neil Zampella, KN3ILZ On 1/28/2018 2:44 PM, Wayne Burdick wrote: Special K2 pricing is good until at least the end of February. We’ll fix this on the website early next week. tnx Wayne N6KR On Jan 27, 2018, at 6:19 PM, Neil Zampella <ne...@techie.com> wrote: Wa

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

Wayne, I've been trying to convince SWMBO that I need something to keep me busy now that I'm semi-retired, I almost have her convinced that my building a K2 would do it, but I noticed that the pricing lasts until Jan 31st.   Are you thinking about a Valentine's Day sale too ??? 73 Neil

  1   2   >