Not going to happen.
Sent from my iPhone
...nr4c. bill
> On Jan 5, 2021, at 11:50 AM, Ted Roycraft wrote:
>
> I assume that all K4's being shipped now are to those in Group 1. So, it
> would be very informative and interesting if Elecraft could post the order
> date of th
The superhet is the K4HD, not the K4D. “D” only adds a second AtoD and an
antenna port. It will be available when radios ship.
Sent from my iPhone
...nr4c. bill
> On Jan 5, 2021, at 2:43 PM, Doug Turnbull wrote:
>
> Dear OMs and YLs,
>
> Someone on this forum stat
I don’t think Robert will get one until the backlog is cleared.
Sent from my iPhone
...nr4c. bill
> On Jan 5, 2021, at 2:24 PM, Greg Herman wrote:
>
> This is more of a curiosity question, just wondering when the K4 will show
> up on the Sherwood receiver report and how that w
Made one formyK3 build from piece of shrink-tubing.
Sent from my iPhone
...nr4c. bill
> On Dec 2, 2020, at 3:41 PM, James Bennett via Elecraft
> wrote:
>
> Yup, I still have mine from back in the late 60’s as a novice and use it
> every time I build a kit!
>
> Jim /
I suspect it’s a way to have more than 1 antenna connection without the KAT3.
Sent from my iPhone
...nr4c. bill
> On Nov 26, 2020, at 7:37 PM, David Olean wrote:
>
> Hello Don and Carl,
>
> I guess I was not very clear on this. I have a couple of K3s and all have a
>
Make sure all connectors are firmly seated.
Sent from my iPhone
...nr4c. bill
> On Nov 23, 2020, at 6:05 PM, Thaire Bryant wrote:
>
> I just finished rewiring and rearranging my operating position (K3s, KPA1500
> and P3) along with my station computer. On reassembling I fo
Anyone willing to share their delivery Info with us? I’m surprised no one has
announced (bragged) about receipt of a new K4 radio. Shipments started in early
September we thought.
Sent from my iPhone
...nr4c. bill
__
Elecraft
More info?
What does the function key file look like?
Sent from my iPhone
...nr4c. bill
> On Oct 24, 2020, at 6:44 AM, Eric Norris wrote:
>
> I'm using macros inside N1MM logger function keys (wicked cool), to play M1
> memory from the KDVR3, but no matter how I record my call
No, no. The torque wrench is used to insure the proper torque is applied.
A torque wrench is not a torque multiplier, it is a measurement instrument.
Sent from my iPhone
...nr4c. bill
> On Oct 20, 2020, at 6:33 AM, Alan - G4GNX wrote:
>
> Then perhaps someone needs to educate
K3 key out to amp key in or PTT plus usual RF cable. No Alc.
Sent from my iPhone
...nr4c. bill
> On Oct 18, 2020, at 7:56 PM, Mark Wheeler via Elecraft
> wrote:
>
> How do I connect my K3S to a non-Elecraft amp? The amp has an ALC and PTT
> RCA connections. The K3S has
Yes. But the packing is a bit expensive. And, you get a free radio in every
box.
I take it you didn’t save the one they sent it in. Or you bought a pre-loved
item
Sent from my iPhone
...nr4c. bill
> On Oct 8, 2020, at 6:27 PM, w...@jetbroadband.com wrote:
>
> All,
>
>
Add about 13-15 DB to your 12W K4/10 output.
Sent from my iPhone
...nr4c. bill
> On Oct 4, 2020, at 3:37 PM, Dauer, Edward wrote:
>
> Two questions:
>
> Can the K4/10-F be field upgraded to 100 watts at a later time? That is to
> say, will there be upgrade kits avai
Yes the USB cable does this.
I’m fairly early in Grp 1 and I’m not convinced I’ll see mine before Xmas.
Sent from my iPhone
...nr4c. bill
> On Oct 4, 2020, at 3:09 PM, Terry Brown wrote:
>
> I have a KX3 which connects to a signalink that connects to my computer for
> d
Assuming they have one to drop into your K4 it should not affect your ship
date.
Sent from my iPhone
...nr4c. bill
> On Oct 1, 2020, at 6:17 AM, Joe DeVincentis wrote:
>
> When I placed my order In group one, I was told I could add the ATU when my
> order came up for ship. W
Actually I do know when it’s supposed to end. But, I’m not sure 2021 is going
to be better or even different!
Sent from my iPhone
...nr4c. bill
> On Sep 29, 2020, at 11:19 AM, Wayne Burdick wrote:
>
> Eric is working on a K4 shipping update. Meanwhile, I can give you
Ok, then. There IS software for Linux.
Maybe Apache web server on the K4 and a browser on the tablet.
Sent from my iPhone
...nr4c. bill
> On Sep 28, 2020, at 11:40 PM, Grant Youngman wrote:
>
> I think actually that he said they were “going to” develop for Windows 10.
> I h
Use the P3 menu to set one of gibe sict buttons to this feature and when you
wish to save a screen, just tap the button.
Don’t have a P3 anymore but this worked for me. Utility save only saves to
computer file. The button saves to USB stick.
Sent from my iPhone
...nr4c. bill
> On Sep
Gotta have something to do waiting for our K4s.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 11:41 AM, Jim Sheldon wrote:
>
> What, may I ask do these cigarette posts have to do with Elecraft radios?
> You guys are WAY out of line.
>
> W0EB
>
> Sent f
I always figured they wanted the dye for camouflage. But the real reason was
marketing. Women didn’t care for the old packaging.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 10:03 AM, Charlie T wrote:
>
> I remember, but do you know WHY the green "went to war&qu
Sorry. I just realized the original package was green and changed to white, not
the circle which has always been red.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 9:56 AM, Nr4c wrote:
>
> Who remembers “Lucky Strike green has gone to war.” When the green circle
Who remembers “Lucky Strike green has gone to war.” When the green circle
changed to red.
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 8:37 AM, Dave Cole wrote:
>
> LSMFT... Remember that one? The clean version that is...
>
> 73, and thanks,
> D
“I can’t believe I ate the whole thing”?
Sent from my iPhone
...nr4c. bill
> On Sep 24, 2020, at 7:51 AM, Dean L wrote:
>
> Only about 35 years...
> I too thought I don't remember the commercial, but I do remember the woman
> breaking the glass with her voice.
>
Also lookup Arizona ScQRPion iambic paddle. May be a kit available. Used to be
$27 for kit.
Sent from my iPhone
...nr4c. bill
> On Sep 21, 2020, at 12:02 PM, Mike Maloney wrote:
>
> Here is another idea. Search Te-Ne-Ke CW key at youtube.com Mike, AC5P
> https://www.youtu
...nr4c. bill
> On Sep 20, 2020, at 3:06 PM, RVZ via Elecraft
> wrote:
>
> Hi Guys,
>
> My K3 receiver is a little off frequency compared to the frequency stations
> are spotted at. I realize that Packet Spots aren't always posted on
> frequency, but after viewing
Had the same thing a few years ago. I plugged the PP into the K3 only it was
offset a bit. Nanacged to get the cable Red on the K3 Black. Smelled smoke (P3
cable insulation) and blew L1 on the RS232 circuit.
Sent from my iPhone
...nr4c. bill
> On Sep 18, 2020, at 8:31 PM, Edward R C
Oh yes. And the only way out is to upgrade the whole system. Or look for used
items here.
Sent from my iPhone
...nr4c. bill
> On Sep 14, 2020, at 4:48 PM, Edward R Cole wrote:
>
> My K3 SN 4340 bought in 2010 apparently has a failure in the RS232 I/F.
>
> My computer says
Yes. Once stored they are there until replaced or cleared
Sent from my iPhone
...nr4c. bill
> On Sep 12, 2020, at 6:25 PM, Ted Edwards W3TB wrote:
>
> Related question: Should the KAT-500 hold memorized settings after
> shutting down to ready for use another time?
>
&g
Yes but my experience with this always causes a “tune” cycle. I have already
taught my KAT500 my antennas so only need it to locate nearest saved solution.
Sent from my iPhone
...nr4c. bill
> On Sep 12, 2020, at 5:21 PM, Dick Dievendorff wrote:
>
> Page 13 of the KAT500 owne
You need RF to cause the amp to know what band and freq you are using.
Keying then mic on SSB won’t generate RF until you speak. CW, AM, FM or RTTY
will generate RF when keying the mic (or tap the paddles in CW) and will
generate the RF to tickle the Amp and ATU.
Sent from my iPhone
...nr4c
Well, it depends on the “Dummy” load. Have you swept the load with a good
spectrum analyzer or VNA? It may not be 50 ohms at 50 MHz
Sent from my iPhone
...nr4c. bill
> On Sep 12, 2020, at 11:51 AM, Drew Arnett wrote:
>
> After getting my KX3 back from repair (before my nex
Tune before you run wsjt.
The ATU I think forces the VFO into CW mode. Split in a DATA Mode is not
allowed if one VFO is not in same DATA Mode.
Sent from my iPhone
...nr4c. bill
> On Sep 10, 2020, at 12:57 PM, David Needham wrote:
>
> Bill,
>
> It looks like you have unc
Did you have anything plugged into the mic jack.
Sent from my iPhone
...nr4c. bill
> On Sep 8, 2020, at 1:13 PM, Ian Liston-Smith wrote:
>
> While calibrating the KXFL3 filter I somehow got the KX3 into some weird
> mode where without touching it, the main display s
I was not pleased with the original Elecraft supplied power cord either. I
replaced it and never looked back.
Sent from my iPhone
...nr4c. bill
> On Sep 7, 2020, at 11:03 PM, Terry Brown wrote:
>
> I first want to thank all those who responded to my post. In a follow up
The K3 will allow Split in Data modes as well. But both VFOs must be in same
Mode/sub mode first. I
Sent from my iPhone
...nr4c. bill
> On Sep 7, 2020, at 9:52 AM, w4sc wrote:
>
> Bill,
>
> The K3 only allows the “split” mode for SSB and/or CW to be enabled, at
>
The K3 will allow Split in Data modes as well. But both VFOs must be in same
Mode/sub mode first.
Sent from my iPhone
...nr4c. bill
> On Sep 7, 2020, at 9:52 AM, w4sc wrote:
>
> Bill,
>
> The K3 only allows the “split” mode for SSB and/or CW to be enabled, at
>
My point is, it ain’t gonna happen.
Sent from my iPhone
...nr4c. bill
> On Sep 6, 2020, at 10:08 PM, Barry wrote:
>
> My point is there's no need to hit a DELETE key in a forum with a list of
> subject titles that one may choose to read, or not. Email lists are 1980s
Hmmm... “DELETE” is your friend.
Sent from my iPhone
...nr4c. bill
> On Sep 6, 2020, at 6:05 PM, Barry wrote:
>
> David Gilbert-2 wrote
>> And as others have pointed out, there is already a K4 forum on .io .
>> why doesn't that work for you??
>>
>
This comes up often. And Elecraft is adamant that they want it just as it is.
And it’s their “football”.
There is a group on groups.io for the L4 (Elecraft-L4). Perhaps you can check
it out.
Sent from my iPhone
...nr4c. bill
> On Sep 6, 2020, at 9:30 AM, David Christ wrote:
>
>
Press the button marked AFX. Otherwise there is no audio on the right channel
without the Sub-Rec.
Sent from my iPhone
...nr4c. bill
> On Sep 4, 2020, at 10:08 AM, Tom Muller wrote:
>
> Searched the archive however can't find info for speakers set to 2 and no
> sub receiver.
It has a 10MHz Ref input
Sent from my iPhone
...nr4c. bill
> On Sep 3, 2020, at 7:50 PM, Ken Roberson via Elecraft
> wrote:
>
> Hello all
> Will the K4 have an input for a 10mhz GPS reference
>
> Th
I think they built 20-25 for Field Testors for the KX3.
Sent from my iPhone
...nr4c. bill
> On Sep 2, 2020, at 8:22 AM, N4ZR wrote:
>
> Not to be a curmudgeon, but don't you suppose they built at least this many
> for testers?
>
> --
> 73, Pete N4ZR
> Check out th
But well after closing for any of their regular shippers!
Sent from my iPhone
...nr4c. bill
> On Sep 1, 2020, at 12:55 AM, Macy monkeys wrote:
>
>
> It's not midnight yet on the west coast :)
>
> John K7FD
>
>> On Aug 31, 2020, at 9:44 PM, Nr4c wrote:
Did anyone hear of any K4s being shipped yesterday, August 31st.
Sent from my iPhone
...nr4c. bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
So what’s your question. There’s no difference in setup other than frequency.
Sent from my iPhone
...nr4c. bill
> On Aug 31, 2020, at 5:36 PM, bardinet via Elecraft
> wrote:
>
> The six meter band plan allocates 50.1 to 50.3 MHz for SSB use.
> How is the KX3 configure
Grant. No one is creating a group. It has existed since last October or
November.
Sent from my iPhone
...nr4c. bill
> On Aug 30, 2020, at 11:06 AM, Grant Youngman wrote:
>
> I think a comment I made started this discussion.
>
> I don’t have any problem with anyone set
The majority of readers of this list are not waiting for a K4 and therefore
have little interest in a lot of traffic related to K4 shipping/deliveries.
Sent from my iPhone
...nr4c. bill
> On Aug 30, 2020, at 10:23 AM, Peter Eijlander (PA0PJE)
> wrote:
>
>
>>
&g
There were several answers, many were just wrong (1/4-20. Or likely).
But the absolute best answer was from Wayne of Elecraft who is sending out an
envelope with a nut. So who cares what size it is?
I think it might be 6X.75 (mm).
Sent from my iPhone
...nr4c. bill
> On Aug 29, 2020, a
No. They have no interest in doing this.
Sent from my iPhone
...nr4c. bill
> On Aug 28, 2020, at 4:22 PM, Edward R Cole wrote:
>
> I'm not waiting as I did not order one, but...
>
> Won't it be simpler for Elecraft to post this on a link from their website.
> Those who
You might try some Metric nuts. Like 6 mm.
Sent from my iPhone
...nr4c. bill
> On Aug 28, 2020, at 4:15 PM, Mooneer Salem wrote:
>
> Hi all,
>
> Does anyone know what exactly would replace the microphone nut on the KX3?
> (I seem to have somehow misplaced mine.) The
I don’t think the groups.io group here was setup by Elecraft for FTs
I think it was setup by users like you and me especially to discuss K4 stuff.
Sent from my iPhone
...nr4c. bill
> On Aug 27, 2020, at 7:08 PM, Skip Davis via Elecraft
> wrote:
>
> Grant to respond to yo
Yes. The Elecraft-K4 on Groups.io.
And I would like to see posts of when you got notice of shipping, order date,
delivery, and serial number. I think this could really clog up the regulars
Ecraft reflector so suggested using the groups.io list.
Sent from my iPhone
...nr4c. bill
> On
More likely this information will come from us as we announce the various
stages of the delivery progress to the group on one of the reflectors, probably
the K4 group so as not to tie up this one with a lot of traffic not of interest
to the mass membership.
Sent from my iPhone
...nr4c. bill
Not the END yet!
But close.
Sent from my iPhone
...nr4c. bill
> On Aug 26, 2020, at 1:53 PM, Joseph Trombino, Jr wrote:
>
> Howdy Gang.
>
> Any news about K4 shipping?
>
> Last I saw the K4 was gonna start shipping at the end of August.
>
> Take and stay healt
Are you creating txt or HTML + txt?
Are you doing pdf files?
Try submitting a very small file, maybe two lines of log. See if it’s the
submittal process or the file itself.
Sent from my iPhone
...nr4c. bill
> On Aug 25, 2020, at 10:54 AM, Eric Lanzl wrote:
>
> For the last seve
A CM-500 does not need RPH bias mic settings it is a high output element and
RPL bias will do fine with mic gain beteeen 10-20 (I use 17).
Sent from my iPhone
...nr4c. bill
> On Aug 23, 2020, at 1:19 PM, Dave Erickson wrote:
>
> This just happened to me. I heard a screeching w
Oooops
I misread your email. You are asking about the KAT100 in the radio. I read as
KAT500.
Download the KAT500 manual and I believe segments are the same for both ATUs.
And “learning” process is the same.
Sent from my iPhone
...nr4c. bill
> On Aug 21, 2020, at 2:41 PM, M
Read the manual. There is a list of the frequency segments that can be stored
in the memory. It’s near the back of the manual. Most bands are 20KHz
segments, so many for each band.
Sent from my iPhone
...nr4c. bill
> On Aug 21, 2020, at 8:47 AM, NJMike wrote:
>
> The KAT100 ma
Reduce the level of the USB CODEK in Windows to about 30%. This will give you
finer control with the Lin In control.
Sent from my iPhone
...nr4c. bill
> On Aug 20, 2020, at 9:27 PM, Macka Murrah via Elecraft
> wrote:
>
> I am trying to get my K3S set up for Winlink using the
Way to go, Vic!
Sent from my iPhone
...nr4c. bill
> On Aug 17, 2020, at 4:45 AM, Victor Rosenthal 4X6GP
> wrote:
>
> Never mind, I made my own metal dohickey! Just a piece of 1.6mm aluminum
> with a notch in it. Very cool, if I do say so myself!
>
> 73,
> Victor,
cured,
drill out the mounting hole and remount the engine and go flying.
As for the little mounting pieces you can make them with a file or nobler.
Sent from my iPhone
...nr4c. bill
> On Aug 17, 2020, at 2:59 AM, Victor Rosenthal 4X6GP
> wrote:
>
> What do you think abo
Barry
Did I read months ago that I/Q might be available on USB? Or was it posed as a
question or suggestion?
Sent from my iPhone
...nr4c. bill
> On Aug 15, 2020, at 12:03 AM, Bob Wilson, N6TV wrote:
>
> On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar wrote:
>
>> is th
First off, the amp and tuner aren’t going to help you on 2 Meters or 70 CM.
And you're going to need a full 12 Volts at 20 Amps to power the combo. You
might as well use a 7300 and a dual band mobile.
Sent from my iPhone
...nr4c. bill
> On Aug 9, 2020, at 8:29 PM, Keith Gordon wr
Might try re-booting your computer.
Sent from my iPhone
...nr4c. bill
> On Aug 9, 2020, at 6:57 PM, Hank Garretson wrote:
>
> Windows 10.
>
> P3 Utility Ref 1.16.3.15
>
> Connects to my P3 just fine.
>
> When I click on Configuration Tab, both Save and Resto
No mention in his talk. Everything else still says late August. The talk
didn’t say anything we didn’t already know. I was disappointed.
Sent from my iPhone
...nr4c. bill
> On Aug 9, 2020, at 9:38 AM, Art Suberbielle wrote:
>
> Did Elecraft answer the big question-When will t
No. Not until radios start to ship.
Sent from my iPhone
...nr4c. bill
> On Aug 3, 2020, at 10:05 PM, m.weiss--- via Elecraft
> wrote:
>
> Is the user manual for the K4 available? If so, where?
>
>
>
> Tn
Why in “series”?
Sent from my iPhone
...nr4c. bill
> On Aug 1, 2020, at 2:07 PM, Ken Winterling wrote:
>
> Brian,
>
> According to the Elecraft KPA500 manual:
>
> 1. *Never exceed 40 watts of drive to the KPA500 in OPER mode.*
> 2. *You may run up to 200
I think you can only hear Main Rec VFO A or VFO B. The only way to hear VFO A
and VFO B at the same time is with KRX3 sub-receiver as VFO B.
Sent from my iPhone
...nr4c. bill
> On Jul 27, 2020, at 6:32 PM, Jim Rhodes wrote:
>
> You need to set the "SPKRS" on the Config m
distructive ways. Starting with restoring a saved good CONFIG file
And reloading latest firmware.
Sent from my iPhone
...nr4c. bill
> On Jul 26, 2020, at 3:42 PM, Bill DeVore wrote:
>
> I recently did a Parameter Initialization on my K3S. I didn’t save the
> current firmware configura
What are you going to use this voltage for? I think it’s for a mic preamp. It
is not the source of bias for an electret mic. That comes on the mic pin when
turned On in the menu.
Sent from my iPhone
...nr4c. bill
> On Jul 26, 2020, at 2:57 PM, Henk de Vries wrote:
>
>
God ONLY knows.
Sent from my iPhone
...nr4c. bill
> On Jul 24, 2020, at 8:15 PM, K4PX K4PX wrote:
>
> Anybody have any idea when K4 will ship?
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman
Doesn’t the P3 get its frequency from the radio?
Sent from my iPhone
...nr4c. bill
> On Jul 18, 2020, at 8:12 AM, Jim McDonald wrote:
>
> Why doesn't the P3 always remember the same center frequency when returning
> to the band?
&
TNX
Sent from my iPhone
...nr4c. bill
> On Jul 17, 2020, at 10:08 AM, Dick Dievendorff wrote:
>
> My K-Pod, an early one, has a rear-panel USB-B connector labeled "USB", used
> to install K-Pod firmware and also for a K4 connection. K-Pod DC power is
> also pr
A DB15 is not going to connect to the DE 9 on the back of the radio. A DB15 is
a much larger connector.
Also, converting the KXUSB to use on a K3 is not going to provide all the
signals that the KUSB has. No RTS/DTR.
Sent from my iPhone
...nr4c. bill
> On Jul 17, 2020, at 9:29 AM,
It will fit our existing K-Pods??
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 11:56 PM, Dick Dievendorff wrote:
>
> The K4 uses a USB cable to the K-Pod rather than the telephone like cable
> used with K3. There are USB-A jacks on K4 front and back, not undern
Field Testers!
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 11:27 PM, Wes wrote:
>
> Who has a K4 to hook it to?
>
> Wes N7WS
>
>> On 7/16/2020 7:47 PM, Eric Norris wrote:
>> Has anyone found a high-quality coiled cord to replace the K-POD to K4
&g
Yeah. I’m hoping they’ll start building and shipping K4s soon.
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 8:53 PM, Dick Dickinson wrote:
>
> nr4c's use of the present tense indicates he is an optimist.
>
>
> As eve
That’s about where I set my IT!
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 6:22 PM, Ingo Meyer, DK3RED wrote:
>
> Hi Wilson,
>
>
>> I have deduced that the bars in the CWT display are 25 Hz apart.
>> Does anyone know if that's right?
>
> Can
In this case it’s a deposit. They are using the money.
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 3:30 PM, Paul Van Dyke wrote:
>
> IF and IF I remember correctly, they (Elecraft) takes not a penny from you
> till it is shipped. I know the money is waiting for th
I did!
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 2:25 PM, Dave Cole wrote:
>
> You should probably buy an Icom!
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist
> ARRL Asst. Di
No! I wouldn’t turn down free shipping and/or no price increase for those
waiting.
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 2:07 PM, Carl Yaffey wrote:
>
>
>>
>>
>> Hence my frustration. I not only am impatient about getting the Shiny
>>
You probably have the TX Monitor set to zero. Press and hold for 3 sec the
Comp/Pwr knob. VFO B display will change to TX MON and show setting. Adjust as
needed (2-5 should be in ballpark).
Sent from my iPhone
...nr4c. bill
> On Jul 16, 2020, at 1:05 PM, John Stengrevics
>
My first thought is “Heat”!
Sent from my iPhone
...nr4c. bill
> On Jul 15, 2020, at 4:43 AM, Ray Spreadbury via Elecraft
> wrote:
>
> Hi
>
> I was a member of the UK HQ team for this 24hour IARU event last weekend and
> was one of the two Ops on 40M SSB.
>
Don’t get too excited. I’m told it only keeps the clock running. All settings
are in non-volatile memory.
Sent from my iPhone
...nr4c. bill
> On Jul 14, 2020, at 11:25 AM, Steef PA2A wrote:
>
> Hi,
>
> has anyone already changed the CR2032 backup battery in a K3? Unde
I believe that half of US hams are Technician Class, so mostly VHF/UHF FM
operators. Not a lot of DX or contesting there.
Sent from my iPhone
...nr4c. bill
> On Jul 13, 2020, at 4:03 AM, David Gilbert wrote:
>
>
> Fine, but that demarcation is pretty arbitrary. You could ju
Did you verify the CONFIG:RS232 is set to USB?
Sent from my iPhone
...nr4c. bill
> On Jul 10, 2020, at 3:51 PM, gmuller885 via Elecraft
> wrote:
>
> I recently received my unit back from elecraft and the unit was fixed but
> the usb port is not reconized and I do not kno
No it’s not.
Should work on SSB, AM. I’m not sure about FM.
Sent from my iPhone
...nr4c. bill
> On Jul 9, 2020, at 9:50 AM, K4MT wrote:
>
> I posted an earlier message but had a detail wrong. My CMP says N/A on all
> modes except AM. Is this normal?
>
> Gary
> K4mt
Yes. Great program. But it doesn’t run on an Sndroid phone or tablet. Or an
iPhone or other iOS device.
Sent from my iPhone
...nr4c. bill
> On Jul 5, 2020, at 6:40 PM, Jim Brown wrote:
>
> I was lucky to start with DXKeeper when I got back on the air in 2003. It's
> perfect
I’ve always used stereo cables Lin In and Lin Out on my K3.
Sent from my iPhone
...nr4c. bill
> On Jul 3, 2020, at 9:01 PM, Rich wrote:
>
> Is it OK to use a 1/8 stereo male on the LINE IN female jack? Fred's book
> shows the RING is floating so I guess having a TRS male woul
You might turn AGC OFF or experiment with AGC settings.
Sent from my iPhone
...nr4c. bill
> On Jul 2, 2020, at 5:36 PM, Peter Chamalian wrote:
>
> My K3S is turning CW into mush. Huge pile ups as K2D are really hard to
> deal with. Any suggestions other than get a K4 which I h
The KX2 has a “Built-In Electronic Keyer” and optional “Attachable Paddles”.
Sent from my iPhone
...nr4c. bill
> On Jul 2, 2020, at 6:35 AM, K9ZTV wrote:
>
> You’re a victim of a run-on sentence. He meant the rig has a built-in
> microphone and a keyer paddle which i
Watts is Volts X Amps.
Fewer Volts means more Amps. More Amps means more work for power supply,
leading to fewer Volts. Fewer Volts means ...( you get the picture).
Sent from my iPhone
...nr4c. bill
> On Jun 30, 2020, at 8:37 PM, Mike Kopacki wrote:
>
> I didn’t have ring conne
What mic are you using?
Is anything else plugged into the radio?
Sent from my iPhone
...nr4c. bill
> On Jun 30, 2020, at 1:03 PM, Michael Walker wrote:
>
> Hi All
>
> I have had a kx2 since they first came out and I have chased this problem
> since day 1. But,
No. At field it’s batteries. At home an Astron 35m linear or any or several
switchers.
The field setup may be one or two AGM batteries. Nominal voltage 12-12.8 volts.
At home it’s 14.1.
Sent from my iPhone
...nr4c. bill
> On Jun 28, 2020, at 10:06 AM, rich hurd WC3T wrote:
>
>
It takes more than a 1/2 sec hold. A full 1-2 sec works better.
You’re getting the error of trying to go DPLIT when one ZvFO is not on sane
Data mode. Do the double-tap on A>B.
Sent from my iPhone
...nr4c. bill
> On Jun 28, 2020, at 8:31 AM, John McBride wrote:
>
has gold pins or not.
Help!
Sent from my iPhone
...nr4c. Bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Shutdown and restart the Surface.
Have you tried moving the mouse all along All Efges to see if you can access
the errant display?
Try rearranging the displays in Display Settings.
Sent from my iPhone
...nr4c. bill
> On Jun 27, 2020, at 5:03 PM, Dauer, Edward wrote:
>
> Maybe
Please note that if you are trying to get SPLIT mode On. Both VFOs must be in
same DATA mode before you activate SPLIT. Tap A>B twice quickly to do this.
Sent from my iPhone
...nr4c. bill
> On Jun 26, 2020, at 2:03 PM, John McBride wrote:
>
>
> No, it does not but th
Does your software have anything to do with this?
Sent from my iPhone
...nr4c. bill
> On Jun 26, 2020, at 11:43 AM, John McBride wrote:
>
> Thanks for the replies. I am not using split mode, and am trying to make the
> change from USB to DATA A in the individual bands of 20 a
I think it’s the “Z” bracket inside.
Sent from my iPhone
...nr4c. bill
> On Jun 25, 2020, at 10:12 AM, Howard Sherer wrote:
>
> I have had a KPA500 for many years and the only annoying thing is that I
> hear clicking of the metal case parts as it heats up and cools down. all o
Found it!
I bought an ICOM 7300. I figure if I feed it right and provide the right
fertilizer, it will grow into a K4D by Christmas.
Sent from my iPhone
...nr4c. bill
> On Jun 22, 2020, at 12:57 PM, Jim Borowski wrote:
>
> I am having depression for lack of excitment about
1 - 100 of 1160 matches
Mail list logo
