I have a spare 1.8-54 MHz 200W Max Directional Coupler that I'd like to
sell for $100 + USPS.
Please email off list.
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have two W2 Wattmeters for sale. I formerly used four W2's and have
reduced to two.
One W2 has a 2K Power level detector and the other has a 200 Power level
detector.
Each with three cables, programming, data, and power cable.
I am selling each for $200 + USPS priority shipping.
Thank
Unopened K3DSPLPF available
Asking $10 plus shipping
Please respond off line.
Thanks,
73,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I have a KRC2 that is excess to my needs.
Asking $20 plus shipping
Please inquire off line to this email.
Paypal only
73,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Still have an extra amp on hand: http://k3tuf.com/images/Acom/kpa500.jpg
Asking $1,750 plus shipping. SN 1808
73,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Everything sold
Thank you,
73, Phil K3TUF
On 4/3/2017 7:40 PM, Phil Theis wrote:
I have a few extra items sitting around and available for sale
K3EXREF $60 shipped to 48
KXUSB $20 shipped to 48
PR6-10 $100 shipped to 48
Thanks,
73, Phil K3TUF
I have a few extra items sitting around and available for sale
K3EXREF $60 shipped to 48
KXUSB $20 shipped to 48
PR6-10 $100 shipped to 48
Thanks,
73, Phil K3TUF
__
Elecraft mailing list
Home:
Hi have a complete K3S line for sale.
Including K3S/100, P3, KPA500, KAT500 with many extras.
Filters, .250, .400, 1.8, 2.1
Others include: Xref, KDVR3 and MH2
Please contact me off list for more, if interested.
Thanks,
Phil K3TUF
__
Running the latest K3 Utility
If I select download the latest firmware
The dialog box says that it's connected to the server
says to wait
Then I get invalid handle error
then the microsoft error box comes up,
then the application crashes.
Any thoughts on what gives? This been going on for a
Installed P3SVGA in a P3 this weekend.
The P3 starts up, says waiting for SVGA and shuts off.
Any idea what's up?
thanks,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
. bill
On Jun 22, 2014, at 8:46 PM, Phil Theis p...@k3tuf.com wrote:
Installed P3SVGA in a P3 this weekend.
The P3 starts up, says waiting for SVGA and shuts off.
Any idea what's up?
thanks,
Phil K3TUF
__
Elecraft mailing list
Home
Is there a way to lock power setting on the K3 ?
Going into a contest setting and don't want unknowing operators turning
up the power
Thanks,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Scenario: Contest setup, going from voice to WSJT
While sound card audio comes in from the sound card, is it possible to
automatically prevent microphone audio ?
Looking for a bullet proof way to move gracefully from SSB mode to WSJT
mode.
Thanks,
Phil K3TUF
Beautiful, thank you. Just what the DR ordered.
Phil
On 6/4/2014 8:56 PM, Wayne Burdick wrote:
On Jun 4, 2014, at 5:32 PM, Phil Theis p...@k3tuf.com wrote:
Is there a way to lock power setting on the K3 ?
Going into a contest setting and don't want unknowing operators turning up the
power
Greetings,
It was my understanding that power settings on the K3 would track
separately when the KPA500 was off.
On my K3 if I set a power level with the 500 on, it stays when I turn it
off or put it on standby.
What am I missing in my settings to pull this off?
thanks,
73,
Phil K3TUF
No, that's it.
That is the magic I was looking for Ken.
Thanks,
73,
Phil K3TUF
On 5/13/2014 11:48 AM, Ken K3IU wrote:
Do you have K3CONFIGPWR SET set to Per Band?
73, Ken K3IU
~~~
On 5/13/2014 11:28 AM, Phil Theis wrote:
Greetings,
It was my understanding
Some time ago I started losing audio while using my K3
I use Line in audio
The symptom goes as follows: talking along and next thing you know
there is no RF, further research shows that the radio is still in
transmit but there is no audio.
Put an adapter and scope on the audio input
Now I
that would allow me to disable the rest of
the microwave system without doing frequency decoding?
Nice amp btw,
73,
Phil K3TUF
On 1/20/2014 9:14 PM, Wayne Burdick wrote:
OK, Phil. Let me know if this works.
Wayne
On Jan 20, 2014, at 6:01 PM, Phil Theis p...@k3tuf.com wrote:
Wayne,
I hadn't
. transverters. Check page 19 and let me know if this helps.
Wayne
On Jan 21, 2014, at 10:58 AM, Phil Theis p...@k3tuf.com wrote:
Hi again Wayne,
This does work. My only issue is that when I'm on 40 meters my Microwave
station is on 5760MHz and so on. I will need to do something to alert my
In the KPA cable going to the K3 the band data lines are called out, yet
there is no discussion about instructing the K3 firmware to set band
data. My band data is used for transverters with Config:KIO3 set to
TRN. If these lines are not used and band information is derived from
AUXBUS,
, W6FB
Sent from my iPhone
On Jan 20, 2014, at 5:23 PM, Phil Theis p...@k3tuf.com wrote:
In the KPA cable going to the K3 the band data lines are called out, yet there
is no discussion about instructing the K3 firmware to set band data. My band
data is used for transverters with Config:KIO3 set
to use the TRN setting, you have two
other band-switching options for the KPA500: its own front-panel switches, and
RF sensing.
73,
Wayne
N6KR
On Jan 20, 2014, at 5:31 PM, Phil Theis p...@k3tuf.com wrote:
Thanks Jack, then I must be changing my KIO3 Setting back and forth between TRN
and Normal
What is the preferred serial cable routing for the full K line: K3, P3
and KPA500 ?
Looks like from the KPA maunal that PC only goes to Amp.
Thanks,
Phil K3TUF
__
Elecraft mailing list
Home:
Hi,
I thought that there was a setting that would permit me to send cw while
listening in the SSB mode.
Is this possible? Seems to me I had this set up at one time, but cannot
find the right combination to do so now.
Thanks,
Phil K3TUF
Bingo, that's it.
Thanks all,
73,
Phil K3TUF
On 2/24/2012 2:19 PM, Matt Zilmer wrote:
Hi Phil,
Your subject line doesn't indicate a K3, but seems likely that's what
the question is about.
1. Go to CONFIG:CW WGHT
2. Press the '1' key until you see SSB +CW
3. Exit CONFIG:CW WGHT
This
All bands produce full power except 160 meters.
K3 (352) into a Bird dummy load
When I tap TUNE the power is 7 watts.
When I increase the power knob the reading indicates increase in power,
but no actual power increase, then after a second the reading returns to
7 watts.
I hope there is
Has anything ever been addressed with the random noise gremlins that
move across the P3 Screen?
Nothing is every heard on the K3, so it must be solely being picked up
by the P3.
Thanks,
Phil K3TUF
__
Elecraft mailing list
Home:
I am talking about noise gremlins that move slowly across the P3
I know that it could be generated by a Power Supply but I inadvertently
called the P3 a PS.
73,
Phil K3TUF
__
Elecraft mailing list
Home:
Message - From: Phil Theis p...@k3tuf.com
To: elecraft@mailman.qth.net
Sent: Saturday, June 11, 2011 7:45 PM
Subject: [Elecraft] P3 Broad Birdie
Does anyone else get the wide birdie that floats around the P3 screen?
This does not affect the operation of the K3, but does interfere
Does anyone else get the wide birdie that floats around the P3 screen?
This does not affect the operation of the K3, but does interfere with
the display.
Must be on the IF because it is never heard even when it is in the
apparent bandwidth window.
Phil K3TUF
I see talk of this external reference device.
How does one get this?
Nothing results in a search on the Elecraft website.
Been waiting for this since K3 came out.
Phil K3(352)TUF
__
Elecraft mailing list
Home:
Is there something that I missed to invert the display when using a
transverter with the P3?
The spectrum displayed in the + region is really in the - region.
Phil K3TUF
K3/P3
__
Elecraft mailing list
Home:
Got new P3 and worked fine.
Went to load new firmware.
Gave error dialog that needed to turn off P3
Turned off P3
Now K3 is in mid stream says MCU LD
K3 Utility is just looping saying Attempting to contact K3 at various
speeds.
Am I up the creek?
What is my next step to get K3 back?
Phil
Thanks for the quick reply.
I followed that procedure, but when I press K3 power on I get only MCU
LD and tx red led blinking.
How do I recover from this?
Phil K3TUF
On 10/16/2010 8:24 PM, Dick Dievendorff wrote:
Disconnect p3 power plug. Remove K3 power by pulling its power plug. Stop K3
the P3 was turned
on sometime after turning the K3 on.
Dick, K6KR
-Original Message-
From: Phil Theis [mailto:p...@k3tuf.com]
Sent: Saturday, October 16, 2010 5:27 PM
To: Dick Dievendorff
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 / P3 firmware
Thanks
on my iPhone from time to time...
Dick, K6KR
*From:* Phil Theis [mailto:p...@k3tuf.com]
*Sent:* Saturday, October 16, 2010 5:44 PM
*To:* Dick Dievendorff
*Cc:* elecraft@mailman.qth.net
*Subject:* Re: [Elecraft] K3 / P3 firmware
How do I get the K3 Utility so stop attempting to contact the K3
Is there any way to have the W2 auto sense when there is output from
one sensor to the other?
Thanks,
Phil K3TUF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I use the K3 as an IF for transverters. This has worked well for some
time now. I had originally used the 10 watt model, but recently
upgraded by adding the 100 watt amplifier. Now the issue begins.
9 transverter slots are not enough for the bands I have; 50-24192MHz,
which is 11 bands with
I just installed the KPA3 and am experiencing ERR TXG in several of the
lower bands. The Owners manual refers you to the Service Manual.
Can't seem to find anything on the Elecraft site about a Service Manual.
Any assistance appreciated.
Phil K3(352)TUF
Please don't buy another room at Dayton till my prepaid room is taken.
Super 8 Englewood, just off rt 70 and only minutes from Hara.
$305 for Thursday, Friday and Saturday nights prepaid.
Email me,
Phil K3TUF
__
Elecraft mailing list
Has anyone heard of progress on the external reference feature being
activated?
thanks
Phil K3TUF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Power was a consideration, but I just discovered the 'DAY' selection was
what I was after, no light in a dark room.
I believe we already have what I was looking for.
Phil
- Original Message -
From: George Victor [EMAIL PROTECTED]
To: Phil Theis [EMAIL PROTECTED]
Cc: elecraft
This would be a great addition to the product.
Phil K3(352)TUF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Given the following setup: K3 using transverters, with 50MHz transverter
set for xv1.
When I enter a 50MHz frequency via the com port the built in 50MHz
receiver is selected. I then have to band up once to get to the xv1,
then I can successfully band up to 144 etc. If I enter a 144 frequency,
Greetings,
I just used the excellent firmware utility to upgrade the firmware. What is
dsp2 and why is it n/a?
thanks,
Phil K3(352)TUF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
Thank you, makes perfect sense.
73,
Phil
- Original Message -
From: David Ferrington, M0XDF [EMAIL PROTECTED]
To: Phil Theis [EMAIL PROTECTED]; Crafters elecraft@mailman.qth.net
Sent: Thursday, February 28, 2008 7:15 AM
Subject: Re: [Elecraft] dsp2
Its for the sub-receiver, so until
That's great, just what I want to hear. Just so it's on the road map.
Didn't get that assurance from Gary.
Thanks so much Lyle. We can wait for something good.
73,
Phil K3(352)TUF
- Original Message -
From: Lyle Johnson [EMAIL PROTECTED]
To: Philip Theis [EMAIL PROTECTED]
Cc: 'Paul
Where is the ALC line? I need it to attach to 144 mhz amplifier. I have K2
only, no 100 watt option. Use the transverter interface for rf output.
thanks
Phil
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
48 matches
Mail list logo