experience with this configuration and can let me
know how it should be connected to have it working?
Thank you
73,
--
Philippe Givet
F5IYJ (NK2F)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi,
Looking for an used KPA500 for a local radio club there in France.
So if someone, preferably in Europe, would like to sell his KPA500 (to
buy the new KPA1500 or any other reason), please drop me a note.
Thank you
73,
Phil
--
Philippe Givet
F5IYJ (NK2F)
http://f5iyj.com
Thanks Don,
I measured at 4000KHz (5.87V) and at 3500KHz (1.85V) so it is within the
range you gave me. I need now to take my RF probe and go further.
Again, many thanks for the help you provided. Greatly appreciated.
73,
Phil.
On 02.10.2016 00:43, Don Wilhelm wrote:
> Phil,
>
> One
d to go 'deeper'.
73,
Phil.
--
Philippe Givet
F5IYJ / NK2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted b
Hi,
thanks Matt & Don for your messages.
The issue is located on the K2, not on the PA
I checked K3 and K8. K3 looks fine but it looks like I have a shortcut between
the pins 7-8-9.
I will get another relay and change K8.
Thanks again
Cheers,
--
Phil
F5IYJ / NK2F
Hi,
I bought an used K2/100 with an issue on 80m:
- RF is low (less than 1 watt) even when PWR set to 100W
- reception sensibility is low as well, I need to switch the PRE to hear
something on the band.
- all other bands are doing fine (good sensibility, 100W+)
I first though about the
Hi,
Wanted to buy from Europe a used KX1. My preference to a KX1 with 8030
module and internal ATU included but will study all proposal :)
Please answer outside this distribution list, to my personal mailbox.
Thank you
73,
--
Philippe Givet
F5IYJ / NK2F
Dear Elecrafters,
Is it possible to increase the speed of the the PWR knob ?
To move from low to high power and vice versa on my K3 #3616 is quite long.
Thanks for ur advises.
Bst 73's
Philippe A65BI
__
Elecraft mailing list
Home: http
Many thanks to Gary, Jim and Paul for their kind advises.
Macros has been assigned for that purpose and it exactly fit my needs.
Bst 73's
Philippe A65BI
Quoting philippe.trot...@ties.itu.int:
Dear Elecrafters,
Is it possible to increase the speed of the the PWR knob ?
To move from low
to increase
slighty the bargraph excursion ? I haven't see any infos on the adjustment
procedure or my eyes missed it.
Firmware 4.25 installed
Thanks for advises
73's
Philippe A65BI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Le club des Elecrafters Francais s'agrandit.
Bienvenue
73's
Philippe A65BI (F5LTB) ex-9Q1TB, 2003-2008
K3#3616
F8EZE f8...@orange.fr 19-11-2010 23:54
Hi Folks,
La Poste dear Georges. Enjoy your K3 !
F8EZE Jean
K3 #998
-Message d'origine-
De : elecraft-boun...@mailman.qth.net
4.22 beta release installed
Not noticed on my side.
Filters on use on my K3: 6, 2.8, 1.8, 1, 0.4 (Same for SUB RX)
73's Philippe A65BI
K3#3616
Nate Bargmann n...@n0nb.us 16-11-2010 5:33
Wayne, I do still hear a noticeable 'tick' on CW when going from 150 to
100 Hz and back again. It seems
Try to use a FTP server to download the zip file of Beta versions.
I'm using Filezilla Client from Mozilla, never get a problem to download from
Elecraft.
Bst 73's
Philippe A65BI
James Sarte (K2QI) k2qi@gmail.com 16-11-2010 19:47
Dr Martin,
I have not had this experience with any
FileZilla Client from Mozilla is also free and works ok.
73's
Philippe A65BI
Bill VanAlstyne W5WVO w5...@cybermesa.net 17-11-2010 1:49
Just as an FTP suggestion -- If you are using Mozilla Firefox as a browser
(which IMO everyone should be), there is an FTP client plug-in called
FireFTP
Hi Wayne,
Just downloaded MCU 4.18. Great improvement and everything is ok now.
Once again many thanks for the tremendous support of the Elecraft team.
Bst 73's
Philippe A65BI
Elecraft, by Hams, for HamsWhat else !
Wayne Burdick n...@elecraft.com 05-11-2010 8:54
We're working on the SSB
Even the mic dynamics came back to normal compare to 4.17, I confirm the same
difference between 4.18 and 4.14 and about the APF if moving the Shift to 1khz
a big click then nothing. Need to go down to 280 HZ to restart the APF.
73's
Philippe A65BI
Geoffrey Downs geoffre...@madasafish.com
is a so great add-up in
weak signal environment !
Bst 73's
Philippe A65BI
Tim Tucker ae...@worldwidedx.com 05-11-2010 20:02
I have the same experience that Philippe has. I thought I had one or both
3cx800A7 tubes going flat in my amp when I had to increase the drive to a
level I never have been
a must to catch the beacons qrg's.
Bst 73s
Philippe A65BI
Dave Perry N4QS n...@comcast.net 05-11-2010 4:34
I am seeing the same reduction in SSB output power. I installed 4.17 Beta
last night. It appears that the reduced power only occurs when I have APF
activated. I have twice restored SSB
I agree with the comments about the use of the DPB filter who act as a APF
with wider Q.
May be the suggestion is to give more flexibility to the DBP filter in order
to let the K3 user choosing what would be the best in its own suppressing
noise environment.
73's
Philippe A65BI
The Smiths
Received also and junked it.
73's
Philippe A65BI
David Guernsey mooo1...@yahoo.com 25-09-2010 14:49
I also received an email with subject Sad News
73s de Dave Guernsey KJ6CBS
__
Elecraft mailing list
Home: http
.
Any trick ?
Bst 73's
Philippe A65BI
K3#3616
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
73's
Philippe A65BI
K3#3616
*Elecraft, for Hams, by Hams...What else ?
Steve Harvey n...@embarqmail.com 10-08-2010 22:18
I don't really have a horse in this race because I am personally very happy
with my K3 (#693) and, knowing that Wayne's Engineering degree included
emphasis
Hi James,
I'm using MH2 also for Field day opertions and almost same as you, set MIC=2
COMP=20 TX equalizer has been adjust to my loud voice given preferential to
medium high audio. Great
73's
Philippe A65BI
K3#3616
k2qi@gmail.com 20-08-2010 18:54
Who uses the Elecraft hand mic? I do
living in UAE is already lightning protection equipped
and apart of the strong lightnings during the colder season it is very useful
because we are facing time to time sand storms who induce an important amount
of static.
Have a good day
Bst 73's
Philippe A65BI
K3#3616
Don Wilhelm w3
Hi Dave,
For the test I progammed the fan to max, after the test I put them back
to auto.
I would have mentioned it.
Tks
Philippe A65BI
Dave Hachadorian k...@arrl.net 30-05-2010 20:32
---
From: Philippe Trottet trot...@unhcr.org
Sent: Sunday, May 30, 2010 4:40 AM
To: n
flux with my hand.
Indeed very quiet fans.
73's
Philippe A65BI
K3#3616
Mike n...@nf4l.com 30-05-2010 15:01
I have yet to hear the fan on my K3/100. I have a fairly noisy computer
though, so that may be masking it. SN 3539.
73, Mike NF4L
Ross Primrose N4RP wrote:
Is this fan noise an issue
Hi Craig,
Fully confirm your impression. Seems superior and weak signals ssb/cw more
readible and less agressive to my ears.
Using an old Sony MDR7505 Headset
Bst 73's
Philippe A65BI
K3#3616
Craig vk...@yahoo.com 23-05-2010 15:34
Hi folks
I just completed the DSP upgrade board swap. I would
Dear Phil,
I will attempt to be there, 17:45Z
Philippe A65BI
Phillip Shepard ph...@rio.com 22-05-2010 22:25
Hi guys,
The weekly SSB net will meet tomorrow (5/23) at 1800z on 14.314 MHz. I will
be net control from western Oregon. We'll try to pull in other NW stations
that I can't hear. See
interested by all comments on the subject.
Bst 73's
Philippe A65BI
K3#3616
juergen plebia...@yahoo.com 20-05-2010 15:15
Hi
When the K3 was first released, the noise blanker was very effective on the
Chinese Radar on 40 meters. This radar was very active on the CW end of 40
meters. You could
Hi Phil,
Will be normally there starting 17:45 to contact some Elecrafters who could do
the qsp for me.
73's
Philippe A65BI
Phil Shepard ph...@rio.com 15-05-2010 21:41
Hi guys,
The weekly SSB net will meet tomorrow (5/16) at 1800z on 14.314 MHz. I
will be net control from western Oregon. See
Hi Roger,
Was a real pleasure to contact u for the 1st time. (no directional antenna on
my side, only a 84m loop)
Apreciated the long chat with Brendan EI6IZ at the end of the net.
Will Call again 17:45Z next Sunday for qsp.
73's
Philippe A65BI
http://www.qrz.com/callsign/A65BI
Roger Stein
... and they
qsy most of time.
73's
Philippe A65BI
K3#3616
Michael M. Raskin rask1...@bellsouth.net 09-05-2010 2:24
I have the 2.8 kHz filter in the main receiver and want to supplement that
with either the 2.1 kHz or 1.8 kHz filter. A friend who has the 1.8 thought
is was too narrow. What
Will be there, starting to call 17:45. In advance tks for the qsp.
73's
Philippe A65BI
Phil Shepard ph...@rio.com 08-05-2010 8:19
The weekly Elecraft SSB net will meet this Sunday (5/9) at 1800Z on
14.314 MHz. Roger, K7SJ, will be NCS with help from Gus, KD0QH. Join
them.
73,
Phil, NS7P
Normally I will show my presence around 17:45Z.
In advance thanks for the qsp from Bob VE3XM or Tony VE3QF.
Bst 73's
Philippe A65BI
Phil Shepard ph...@rio.com 02-05-2010 3:05
The weekly Elecraft SSB net meets tomorrow (5/2) at 1800z on 14.314
MHz. I will not be available to be NCS
with
strong sig from Germany.
Hope to contact more Elecrafters in the future.
73's
Philippe A65BI
K3#3616
Phillip Shepard ph...@rio.com 26-04-2010 6:25
We had another good net today, even though most signals were not that
strong. We had 27 participants over the 34 minute net. We had two from over
Really nice looking but what would be the effects of the extra weight on the
axis after extended use ?
73's
Philippe A65BI
Tom W8JI w...@w8ji.com 23-04-2010 2:17
Maybe I'm missing something???
Doesn't just sliding the K3 knob on so it just kisses the
felt washers do the same thing?
The K3
thats cover most of my applications. At 13W it
engage the KPA100 for higher power needs.
Just set the K3 to the power level you want to use without going over
the specs of your equipment.
Bst 73's
Philippe A65BI
Arie Kleingeld PA3A p...@xs4all.nl 21-04-2010 11:25
Franco,
Forget about the ALC.
Up
the specs before testing any new equipment and
have costly equipment in my pro lab to monitor it, that is not the case
of most of Hams.
So again mea culpa.
Bst 73's
Philippe A65BI
K3#3616
By Hams, for Hams...What else ?
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United
FYI
73'S
Philippe A65BI
K3#3616
EARS e...@ears.ae 16-04-2010 8:17
Dear All :
We are pleased to invite you to participate us in our celebration with World
Amateur Radio Day in our HQ on Sunday 18 April 2010
With special call sign A6WAD
Best regards
EARS
73
MENU- CONFIG EXTD, TECH MD=ONturn the B knob until SER NUM.
or
Download the K3_EZ SOFTWARE
then go to K3 info, ur S/N will be showed
73's
Philippe A65BI
Brett Howard br...@livecomputers.com 13-03-2010 12:31
So where is the SN stored in the K3? The people who received new upgraded
DSP
?productid=156cat=140
Some mentionned in the qth.net they have already tested this method, who seem
given good results in severe ssb interferences. Will see when the filter will
be on my desk and intalled.
73's
Philippe A65BI
K3#3616
Brett Howard br...@livecomputers.com 12-03-2010 12:01
I'd select
Do not hesitate: 1.8khz then with the K3 utility you modify the start point to
2.1, you will see the improvement in strong interferences.
73s
Philippe A65BI
K3#3616
r...@aol.com 12-03-2010 7:37
Hi Guys,
For SSB contesting: if your K-3 radio had the stock 2.7khz filter and you
could only
procedure.
Can feel the difference in my Sony MDR 7505 headsets, the listening is less
aggressive to the ears on cw ssb weak signals in a noisy environment like
mine, industrial area, making some improvment on weak signals.
Thanks to Elecraft for that useful add-up.
73's
Philippe A65BI
K3#3616
Philippe A65BI
K3#3616
K2QI k2qi@gmail.com 08-03-2010 19:47
Just saw that Elecraft is now offering a DIY kit to upgrade your current DSP
board with the LPF module. This is a good option as the current exchange
program is taking waaay too long. I was on the list to receive an upgraded
board
Dears,
I'm using a SONY MDR 7505 since 2003 with various rigs.
Not a noise cancelling headphone but great comfort, with a very clear
audio on cw, ssb am/fm.
Power (mW):1000
Impedance: 24 Ω
Frequency response: 10Hz - 25Khz
Sensibility (dB / W / m): 106
Weight: 220g without cable
73's
Philippe
Hi Phil,
Hope to put my name on the list soon as cycle 24 seems to start...finally like
an albatross who need some distance to take off.
Bst 73's
Philippe A65BI
Phillip Shepard ph...@rio.com 22-02-2010 8:50
We had a very good net today. Signals were generally good, and we had 37
participants
Hi Eric,
Good to know, I will order one when we will be able to place the on-line order
for the P3.
73's
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else ?
Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com 17-02-2010 22:05
your K3 will need to have the KXV3 or KXV3a
P 130 is blank on the pdf document !
73's
Philippe A65BI
Kok Chen c...@mac.com 16-02-2010 14:16
On Feb 16, 2010, at 12:39 AM, turnbull wrote:
When you write the manual for the P3 would you please include a good
explanation of the use of waterfall displays. I have one on my OII but do
Yes hector but you mentioned on the previous your AGC for cw is off.
When AGC is off the NR is deactivated on the K3 Am I wrong ?
73's
Philippe A65BI
K3#33616
*Elecraft, by Hams for Hams...What else ?
Hector Padron ad4c2...@yahoo.com 17-02-2010 8:16
You can hear my DSP working in CW
May be, Others 3% !
KE4INM ke4...@gmail.com 16-02-2010 0:07
I may be mistaken, but I don't see Amateur Radio in there future. Check out
the JVC-Kenwood Holdings Website.
http://www.jk-holdings.com/en/corporate/strategy/index.html
__
Hi Ken,
We can filter the subject as I do, some external subject do not appear on my
list.
Best regards to Rose.
73's
Philippe A65BI
K3#3616
Ken Kopp k...@rfwave.net 15-02-2010 23:09
Hello Larry,
No, you've seen same the posts to the reflector as the rest of us.
The number of posts about non
Hi Ken,
We can filter the subject as I do, some external subject do not appear on my
list.
Best regards to Rose.
73's
Philippe A65BI
Ken Kopp k...@rfwave.net 15-02-2010 23:09
Hello Larry,
No, you've seen same the posts to the reflector as the rest of us.
The number of posts about non
Ah Ah... P3 must have a bidet with a rotary jet and brakes on the spare wheel
!!
Next time some will ask for planet diversity.
73's
Philippe A65BI
K3#3616
* Elecraft, by Hams, for Hams...What else ?
n...@tx.rr.com 16-02-2010 1:49
My major disappointment is that, in my admittedly non-expert
73's
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else ?
Bob - W0GI b...@gotoloveland.com 15-02-2010 8:28
You joke about catching up with the K2. The Kenwood TS830s is a 30 year old
radio that has performance thats better than the K2 in many areas. It is
the case of the K2
Some relaxation time in this world of brutes have never harmed a person. It's a
hobby first !
Cheers
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else !
Radio Amateur N5GE n...@n5ge.com 10-02-2010 19:26
On Wed, 10 Feb 2010 06:16:02 EST, k...@aol.com wrote:
Enough
.
No other usual Ham radio provider are able to provide such good after
sale service and one of the major point: they are listening the users
comments in order to upgrade the rigs on the right way to our
satisfactory.
Bst 73's
Philippe A65BI (F5LTB)
K3#3616
*Elecraft, by Hams, for Hams...What else
Great !!!
We will see soon a 3D-SP movie picture scenario Hi !
73's
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else !
k...@aol.com 10-02-2010 15:16
In a related incident, another ham-radio enthusiast, Hezekiah Bambershoot,
of Ft Jackson, was arrested at police headquarters
Dear Eric,
As I think you'll start with an appeal price in Orlando Hamfest, how a
far foreigner can take advantage of it ?
Bst 73's
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else ?
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner
rigs, professionally and on the Ham side.
Bst 73's
Philippe
K3#3616
By Hams, for Hams...What else !
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
PO BOX
rigs, professionally and on the Ham side.
Bst 73's
Philippe A65BI
K3#3616
By Hams, for Hams...What else !
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
Great... and there is still a kernel of truthHi !!
73's
Philippe A65BI
K3#3616
*Elecraft, by Hams, for Hams...What else !
Mike n...@nf4l.com 10-02-2010 3:54
ROTFLMAO!!!
73, Mike NF4L
Al Lorona wrote:
MAN HOSPITALIZED WITH ANXIETY OVER HAM RADIO
Southland County Morning News
: Vibroplex + straight key Siemens
Baumuster T1, both connected.
Bst 73's
Philippe A65BI (F5LTB)
k3#3616
Elecraft, by Hams, for Hams...What else !
K6LE k...@mac.com 09-02-2010 6:46
Well said!
I'm just glad I bought my K3 before I got too involved in some of the
discussion on here. If I hadn't
's
Philippe A65BI (F5LTB)
K3#3616
Elecraft, by Hams, for Hams...what else !
Paul - WW2PT ww...@arrl.net 04-02-2010 21:59
Interesting reading. I'm surprised none of these contesters got the memo
about how big guns would never buy a K3 because it didn't have 200W or 1,000
knobs on the front
Hi Rob,
I've ordered some of them, still on the way to me
Please find attached the pricing info and links.
Bst 73's
Philippe A65BI
K3#3616
Elecraft, by Hams, for Hams...What else !
k...@baymoon.com 05-02-2010 2:52
The covers look interesting but I didn't find any pricing info
Hi Gary,
I was travelling when I passed my order last October and it has been
done from an internet Cafe founded on my way.
73's
Philippe A65BI
K3#3616
rfenab...@gmail.com 27-01-2010 14:11
Hi,
Does anyone know how to get rid of the website frames?
The order page will not show the complete
For a refined ham it is compulsory to own a k3
We can add: Elecraft...By Ham's, for Ham's...What else !
Thanks for the release, already downloaded, great !
73's
Philippe
A65BI
K3#3616
Hector Padron ad4c2...@yahoo.com 26-01-2010 6:08
Cool,!! downloaded and working already in my K3
And Nigeria is one of the well known countries for hackers and crooks.
Bst 73's
Philippe A65BI
VE3GAM Allen McRorie ve3...@rogers.com 17-01-2010 19:37
I am 100% sure that this did not come from the station indicated, in the
message
properties, the
originating IP address is from Lagos, Nigeria
on it.
73's
Philippe A65BI
Bill VanAlstyne W5WVO w5...@cybermesa.net 12-01-2010 20:03
You bring up the interesting question of configuration for the narrow
filter -- i.e., where do you set it to kick in? I opted for 1.9 kHz, you
opted for 2.1 kHz. I'm curious as to where others have
to listen clearly and do the
contact with JA8BOF on 7.088.
Just a trick, to program with the Elecraft utility the1.8Khz filter, starting
from 2.1Khz.
When listening with the 2.8 moving the width down will activate automatically
at 2.1Khz the 1.8 filter, it is helpful.
73's
Philippe A65BI
http
when Wayne and Eric will be retired but no doubt they will find somebody
in the pure Ham spirit as they are.
73's
Philippe A65BI (F5LTB)
http://www.qrz.com/callsign/A65BI
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International
parameters in order
to take the best of that rig.
Hope you will join back the Elecrafters soon. May be one day on the air
!
Happy New year 2010 to you and your family.
Bst 73's
Philippe A65BI
K3#3616
http://www.qrz.com/callsign/A65BI
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United
to our usual providers.
They waked up my Ham spirit after too many decades using most of the
limousine rigs available on the market.
It's time to move to Nascar rigs and challenge for the piston cup .
Bst 73's Happy New Year
Philippe A65BI (F5LTB), ex-9Q1TB for the last exotic one.
K3#3616
By Hams
Dear Wayne,
Its great !
Many thanks for your efforts.
Bst 73's
Philippe A65BI
K3#3616
Wayne Burdick n...@elecraft.com 30-12-2009 21:54
We're going to make NR per-mode in the next firmware release, too.
This should eliminate the need to hunt for the ideal setting each time
you change modes
Philippe A65BI
K3#3616
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
is perfect for general purpose.
My actual config, all 8 poles filters
Main
FL1: 6K
FL2: 2.8K
FL3: 1.8K
FL4: 400Hz
Sub:
FL2: 2.8
FL4: 400Hz
Bst 73's Happy New Year.
Philippe
A65BI (F5LTB)
K3#3616
Martin Schmiedel hamra...@vr-web.de 28-12-2009 4:00
Elecrafters,
i am about to order
One more time propagation is not on my side.
Short path 20m to K4, best spot expected 13:30 ~ 14:30Z, SNR only 14dB / 100w
73's
Philippe A65BI (F5LTB)
K3#3616
ph...@rio.com 26-12-2009 20:13
The weekly SSB net will take place on Sunday, December 27, 2009 at 1800Z on
14.314 MHz. I
Elecrafters, especially in
good health, and that all your wishes come true.
Best 73's
Philippe
A65BI (F5LTB)...ex 9Q1TB many exotic ones
K3#3616
* Elecraft, by Hams, for HamsWhat else !*
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
.
Vibroplex for normal use and hand key for contest that's real Ham sport
!
Best 73's
Philippe A65BI
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
PO
Hi Terry,
It works with mine.
When AGC OFF if you have a huge sig, i.e 59+ it block and you can't hear it any
more, only see the bargraph. You need to use the RF knob and adjust in order to
hear it agn.
Bst 73's
Philippe A65BI
K3#3616
Terry g4...@sennen-cove.com 10-12-2009 18:40
Sorry I have
during transport for field day or dxpedition ?
Bst 73's
Philippe A65BI
K3#3616
David Ferrington, M0XDF m0...@alphadene.co.uk 03-12-2009 14:42
Knobs here are ok, as with Julian, I too built my K3 and was careful
about the fitting.
0.050 Allen key came with knobs in kit, so Elecraft should be able
...and expensive toys.
Bst 73's
Philippe A65BI (F5LTB)
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
PO BOX: 506013
DUBAI - U.A.E.
Dubai time: GMT +4
W
.
Considering the size of the Yaesu company, they have huge sunk costs and
payroll...unless they will open factories in China, taking the risk to destroy
their image.
73's
Philippe A65BI (F5LTB)
K3#3616
juergen piezo plebia...@yahoo.com 23-11-2009 11:22
Hi
It looks like Yaesus new FT5000 has
Lionel,
Don't worry the cable works perfect, I've received my K3 two weeks ago
with the KUSB option.
Only to go to the Electraft website and download the usb utility
depending your driver that's all.
73's
Philippe
A65BI / F5LTB
K3#3616
Lionel Lhermitte f6...@orange.fr 20-11-2009 17:12
Hi all
Same symptom for me w/ ERR BP4 when power on. It appears after downloading the
3.59 update yesterday ??
73's
Philippe A65BI
K3#3616
Iain MacDonnell - N6ML a...@dseven.org 20-11-2009 4:20
Hi Fred,
Check CONFIG:KBPF3 - it should be not inSt if you don't have the
KBPF3. I changed mine to rF nor
to stay younger !
Thanks to Elecraft !
Bst 73's
Philippe
A65BI / F5LTB (and ex 9Q1TB many others...)
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
PO BOX: 506013
Yes, few days ago and I was obliged to check the cluster via HB9DRV website.
Today apparently no problem on my side
73's
Philippe
A65BI
Phillip Buckholdt k8mb...@wadsnet.com 17-11-2009 15:58
Anyone having a problem with DX summit?
Phil
K8MBY
Dears
I've seen on the manual S9 /50 microvolts is adjusted with Preamp ON .
As a new Elecrafter I need some explanations, because with my previous rigs, I
use to calibrate S9 without the preamp.
Thanks
Philippe A65BI
K3 #3616
Bill W4ZV btipp...@alum.mit.edu 17-11-2009 22:25
Geoffrey
serving the Civil
Defense (FNRASEC) Call: F8RSF
Bst 73's
Philippe
A65BI / F5LTB (Ex 9Q1TB)
K3 #3616
Philippe TROTTET
Head of Field Telecom Unit - DUBAI
United Nations High Commissioner for Refugees
International Humanitarian City
Office Building Nº3 - Room 2, 1st Floor
Doha Street
PO BOX
on their website.
You've just learned me was an Elecraft net originating from Iraq, is it
still active ?
The Elecraft net is also an useful tool to discover other Elecrafters
if they are enrolled on it.
Hope to contact you as well
Bst 73's
Philippe
A65BI
Note:
As per the new rules in UAE
Philippe
Kevin Rock kevinr...@earthlink.net 16-11-2009 9:11
Hello Philippe,
There is an archive of old Elecraft Reflector email. I am sure
there is someone out there who can help you find the Iraq Elecraft Net
listing. I am unsure of how long ago it was but at least three or four
years ago
of the wire in a tree and the other side in the RF output.
Press the ON button, then the TUNE button.Listen, 'QRL?', GO!
Only 1 min. to setup and all the rest for traffic.
Have fun!
Philippe, F5IYJ.
P.S.: As usual, it's a good idea to remove battery from any device when
you don't use them
@ Elecraft ; Bob, G3VVT (for U6
help), JB, F8DQL and his day to day strong support (this is also cool if
you have an experienced amateur near you to help you troubleshoot) and
all helpful list members !
73, Happy New Year and hpe cu sn
Philippe
f8bxi
K2 #4068
, but as a Dx4Win user and fan, I'm trying to make it
work under Wine or QEmu. Still unsucessfull...
73,
Philippe
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
;-),
Philippe
PS : a friend of mine has sold his 2 years old K2 only to have the
pleasure to build a new one and play with the solder iron :-)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
94 matches
Mail list logo