Doug;
Did you not receive my previous E-mails ?
I try to contact you many times on many ways but no reply anymore ?
Regards Jean ON4AEF.
-Original Message-
From: Doug Shields [mailto:w4...@comcast.net]
Sent: vrijdag 17 februari 2017 03:49
To: 'Behiels Jean-Pierre' <jeanpierre.b
Hi K2 users;
We all now that the digital interface realised especially for the K2 by
EA3BLQ in past,is SK despite !
A lot of time is gone,but are there some alternated suggestions,about the
building concept of EA3BLQ.
I can imagine that someone has continues his PCB art work for further
Hi members;
Perhaps someone now about this company or any experience with ?
I do have made a order at 5 november 2016
Till now,not any order received ?
I now,it has nothing to see with K-radios .
hfwireantennas.com
4673 Henry St
Norton Shores, MI
49441-5432
vm 231-335-3775
Hi members;
Perhaps someone now about this company or any experience with ?
I do have made a order at 5 november 2016
Till now,not any order received ?
I now,it has nothing to see with K-radios .
hfwireantennas.com
4673 Henry St
Norton Shores, MI
49441-5432
vm 231-335-3775
Hi K2 members and Don W3FPR.
Last night I do have next failure.
I was transmitting with 50 W in CW with my K2/100 with in conjunction with
my KAT100 into a perfect aligned 7 Mhz dipole (SWR1/1)
Before starting I always do a tune with my K2 we never no the SWR is bad hi.
The SWR indication
Hi Dale good afternoon;
Could you give me the details about this modification(published article or
so )?
Are there some available part numbers for the new bar graph LED block ??
Seems to be a interesting modification to do hi ?
Regards Jean ON4AEF.
-Original Message-
From: Elecraft
a software mod. My KXBC3
clock gain about 15 seconds per week ... far away from 3 seconds per month
... ??
73 de Pierre VE2PID
--
Utilisant le logiciel de courrier d'Opera : http://www.opera.com/mail/
__
Elecraft mailing list
Home
.
And about the pixel problem, it was related to the RF control (RF not 0) so I
did the correction ... and no more annoying "pixel" ...
Many thanks for your help.
73 de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.n
Have the battery
charger, tuner and roofing filters options in the radio.
2- The second pixel on the SWR display is lighted even without signal. Not a
major problem .. just want to know what is going on ...
Thanks de Pierre VE2PID
---
L'absence de virus dans ce courrier électronique a été
Sherwood's List now shows 0.27 and 0.20 uV for the K3 (w/New Synthesizer)
...which compares very well to the 'original' K3.
73 de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi Elecraft members;
I already have build a K2/10.
My next project is to homebrew a digital interface for general purpose with
external soundcard into a separated Elecraft EC2 project enclosure.
Is there anyone who could give my some addresses and advise witch kind of
soundcard is usuable for
Hi folks
A question about BL2 Wideband 1:1 4:1 (Switchable) Balun. Does it also
have some kind of'choking' effect (to reduce or eliminate currents on the
outside of the coax)... or is it just a balun (TLT) to transform impedances
?
Thanks
de Pierre VE2PID
Kx1#442, K2 #5170 KX3 # 190
--
View
FB John, but can it 'choke' outside coax currents, like a coiled choke
can do? I cannot see how.. ??
--
View this message in context:
http://elecraft.365791.n2.nabble.com/About-BL2-Balun-tp7578814p7578816.html
Sent from the Elecraft mailing list archive at Nabble.com.
.. A question: Can the Pico+mounting bracket still be used in any position
with the KX3 legs fully extended?
I don't think so ?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Palm-Pico-paddle-for-the-KX3-tp7575392p7575408.html
Sent from the Elecraft mailing list archive
Thanks Bill..
As I understand it, the mounting bracket is made of 2 parts at a angle less
than 90 deg..??
If, so, if I operate with the KX3 without extending the legs, the Pico would
become non parallel to the surface of operation, but it will rise toward the
operator?
73 de Pierre VE2PID KX3 s
Hi Ken,
Just made the same mod. Works fine. I will see after some time if the rare
missing dots are still coming. I often suspected that the paddle hinge are
not always a perfect ground.. so that could solve the problem.
Tnx! 72/73 de Pierre VE2PID KX3 s/n 190
--
View this message
the last FW official release.
Any idea?
Thanks de Pierre
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-won-t-start-tp7561031.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
Sorry folks, my title is misleading. The exact problem is better described
like this one from Yahoo:
Fired up the KX3 this morning..., no receive for several minutes. Antenna
tuned OK and each time the tune sequence ended I had a receive signal
briefly, 1/2 second or less.
Thanks again for any
Hi folks,
Well, after more than 2 months of operations with the KXPD3 and more than
350 QSOs, I still have trouble with that paddle. It occasionally misses
either a dit or a dah. On these occasions, when I push the paddle, the
contact don't produces anything.
So far, the fixes that have read:
Hi Robert,
There is a chain of stores here in Quebec who has a good choice of
batteries. Maybe it can help you:
http://www.batteriesexpert.com/
73 de VE2PID KX3 S/N 190
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-battery-question-again-tp7560379p7560383.html
that my old charger will also work with those batteries?
73 de Pierre KX3 S/N 190
--
View this message in context:
http://elecraft.365791.n2.nabble.com/LiFePO4-Battery-Pack-Performance-tp7560224p7560233.html
Sent from the Elecraft mailing list archive at Nabble.com
.. On page 13 of the KX3 manual, we can read this:
Holding NR turns on noise reduction and displays its setting, which can be
adjusted using the knob above the switch. Tap any switch to exit the setting
display.
I have installed the NR but cannot adjust its setting using the control knob
above
by the KXAT3? That threshold could be adjustable offering 3 choices
like 1.5:1 and 2:2 or also even to 3:1 for example. I can cope easily with a
3:1 SWR, the loss is not so great...
Meanwhile, thanks again for that wonderful rig.
Pierre VE2PID KX3 S/N 190
Hi Stan,
What I often do is to make very frequent band change so I would have to
repeat each time the bypass/debypass process... I would prefer to have a
higher threshold for all bands.
Or another possibility: At the start of a session, I could do a tuning
somewhere in each band I plan to use.
Thanks for your suggestions. Will try all this on a future SOTA group
activation.
73 de Pierre VE2PID KX3 S/N 190
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hello to all.
Maybe that I don't understand the real utility of the roofing filter but I
observed this. Last saturday, we were on a SOTA summit using two KX3s about 40
feet appart transmitting CW at 5 W. And even with the roofing filters on, we
heard each other's sending as a diffuse noise. I
Hi Elecrafters
Other posts refer to the KX3's PCBs as of the mutilayer type. Does it means
double sided or are there also other layers inside the PCB? And if so, how
many?
73
__
Elecraft mailing list
Home:
Here is a link:
KX1 Info Cards (6 Pages) Ken Alexander, VE3HLS e-mail request to:
k.alexan...@sympatico.ca
HTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Hello Elecrafters,
A friend told me that if I install the K6XX CW Indicator in my K2, the display
will also blink in SSB mode. My question: Is there a way or a modification
which would de-activate the indicator when working in SSB mode?
73 de Pierre VE2PID
K2 # 5170
KX1 # 441
my KX1 made over 1500 QSO since building it in Feb 2004 and
want to do more
Thanks for your attention, and have a nice day
- Original Message -
From: Don Wilhelm w3...@embarqmail.com
To: Pierre ve2...@videotron.ca
Cc: elecraft@mailman.qth.net
Sent: Sunday, August 02, 2009 7:17 AM
Subject
don't appear on 40 m.
Any clue?
Thanks de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
it (seems easy to
do)...?
Thanks de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Thanks Don for the suggestion. I repaired the broken trace and the KX1's case
in cool again...
The problem was that the path between pin 2 of U3 and pin 17 of U1 was broken.
Don't know why it made Q6 hot, but anyway it's Ok now
72/73 de Pierre Ve2PID
Hi to all,
I inadvertently pushed to far a screw designed for a new paddle in the hole
near the paddle socket.. and think I damaged the circuit near the edge on the
PCB (the path near the edge seems broken).
Now, the case of the KX1 gets warm even in receive mode. That heat seems to
come
Hi to all... The stereo jack on my T1 ATU don't work properly... intermittent
contact on the ring.. So, I want to change it.
What is the Mouser part # ? Maybe could find one here locally.
Thanks
__
Elecraft mailing list
Home:
changes. But anyway, glad to use my K2/100 on 80 meters again.
Thanks to Don W3FPR for good suggestions on private emails.
73 de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
capacitors
and a crystal... so will ask Elecraft for them before I start that upgrade.
Thanks to all for you suggestions.
73 de Pierre VE2PID
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
the
settings on the tuner, the reflected power needle swings wildly as soon as I
stop keying, even at only 11 watts.
For all other bands (40 up) the rig works fine QRP or QRO.
I would like to know where to look at.. ?
Thanks for your help!
Pierre VE2PID K2#5170
Well I spoke about the SWR meter on my MFJ-949E. If I send CW, when I release
the key, the reflected power needle goes up wildly.. sign of a high SWR... even
at 11 watts.
But that same needle stay at 0 W for a 10 Watts transmission...
Oups..l et me correct my earlier posts. The reflected power needle goes high
while I transmit. A kind of inertia effect with the neddle was confusing me.
Sorry about that.
I will revise all parts of the 80 m LPF. Maybe there is a bad solder there.
73 de Pierre VE2PID
ok, but
not always.
Any idea?
73 de Pierre VE2PID
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Hi Elecrafters,
I am looking at the BL2 250 W balun. Is it a voltage or a current balun?
I plan to use it with an Inverted Vee for 23-30-40 m
73 de Pierre VE2PID
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
sorry for the error on my earlier post .. I plan to use it on 20-30-40 m
;-)
de Pierre VE2PID
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
From David W4SMT
However I'mgetting some annoying noise from the RS-232. My software polls
the K2 every 250ms (4 times per second) and it generates noise on all bands
every time it's polled.
Hello David,
Did you left the frequency counter test cable connected to TP2 (BFO)?
73 de Pierre
Hi Pierre.. YES, I did leave the freq counter cable. Is that the problem?
I'm at work right now and can't test it.
Thanks.. David, W4SMT
David,
I just wanted to know if your cable was still in place before opening my K2.
I have the same noise problem, especially on 20 m, and guessed
compliant, and uses
an Aluminum Oxide insulator (color gray) on the header vs. Berillium Oxide
(color white).
Hope for all that Elecraft will use the new ''A'' design in future
upgrades...
72/73 de Pierre VE2PID
K2/100 # 5170
KX1 # 442
Hi,
I built the 100 W PA about 15 months ago. There was a choke across the
antenna jack at J2, to prevent build-up of any static charge at the antenna
jack.
However, I see in the latest manual of the PA that this choke is not shown.
Any reason for it?
73 de Pierre
K2/100 # 5170
the rig.
I am surprised to see that Elecraft did not find a way to keep the choke
inside the rig and the protection associated with it, instead of
relying on arbitrary external elements...
73, de Pierre VE2PID
K2/100 S/N 5170
KX1 S/N 442
___
Elecraft
to manually change the setup via coax permutation?
73, de Pierre VE2PID
KX1 # 442
K2/100 # 5170
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Hi Elecrafters,
Will the KXB3080 option manual be available soon on the ''Manual Download
section?
72, de Pierre VE2PID
KX1 # 442
K2/100 # 5170
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Hi Elecrafters,
For field operations with a KX/40.30.20m, I currently use a 28 feet random
wire at the end of a 22 feet pole, and an single 16 feet radial on ground.
The computed impedance is 89 - j 341 ohms at 7 MHz, matched by the
KXAT1.
However, at the low end of 80 m, it should be around
CF2, FL3 like CF3...), the difference is not always apparent.
So, how to toggle between the cristals and DSP filters with a correct display
of the set choosen?
73 de Pierre
K2 # 5170 KX1 # 442
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
About the noise blanker: Mine is working fine on all bands except for a
particular noise on 40 m. It is killed completly by the NB on all other bands.
But it seems that the gain is not always (works some time) sufficient to
trigger it at 7,050 MHz. That noise is rising to full strength in about
Update: The problem was at L33. Resoldered and replaced the wires correctly
and got back to a good 5 kHz BFO range. Maybe a loose contact or a short on
the coil.
BTW, I got a tip from another Elecrafter: Since the sole purpose of R116 is
to retain L33, adding ''spaghetti sleeving to the leads
(L).. so that the narrow filters (1 kHz) are almost impossible
to center correctly. I use the Spectrogam method to adjust the filters.
Where should I look to get it back to the previous range?
Thanks de Pierre VE2PID
___
Elecraft mailing list
Post
Well, despite very poor conditions, K2 # 5170 came alive tonight for its first
qso. Got a 599 on 40 meters CW from NJ.
Next step will be the 100 watts option.
73, de Pierre VE2PID
KX1 # 442
K2 # 5170
___
Elecraft mailing list
Post to: Elecraft
Its available there: http://www.tarc.org/leno/leno.wmv
73, de VE2PID
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
BTW There is an asteroid called KX1 (1986). It is currently in Aquila at
about 615 millions km from other KX1s...
73 de Pierre
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
- Original Message -
From: Pierre Desjardins [EMAIL PROTECTED]
To: S55M [EMAIL PROTECTED]
Sent: Friday, January 07, 2005 17:39
Subject: [Elecraft] Miles per Watt
Miles per Watt is nonsense data to impress
people.because nothing happens in linear mode!!!
Not a linear behavior
Hi Eric.. I am just coming back from France and operated my KX1 for a whole
month there..with pretty good results.
Maybe part of the explanation (HI)...:-)
72 de Pierre VE2PID KX1 # 442
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED]
To: Elecraft List
suggestions. Thanks
Pierre
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I actually use that same setup (28' wire and 16' ground, BNC adapter). I get
pretty good DX results, and the SWR is about 1:1 on all 3 bands. The end of
that antenna is attached to a 22' fiberglass telescopic pole.
I would be fine to know about your ''mixed results''?
72/73 de Pierre VE2PID
a ground; it rather makes a poor ground
more effective.
Will send you a schematic of the MFJ 931 via email.
If anyone else is interrested, let me know.
72/73 de Pierre
KX1 #442
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
. But
because it is 46 inches long, it has the potential as a club, and may be
treated the same as golf clubs, baseball bats, hockey sticks, etc.
Hoping that it won't be ''confiscated'' in some european airport I will pass
trough.
Advices are welcome
VE2PID, Pierre KX1 # 442
How about KEYIT for Kenwood fans?
VE2PID Pierre
KX1 #442
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.713 / Virus Database: 469 - Release Date: 6/30/2004
___
Elecraft mailing list
65 matches
Mail list logo