that is exactly what i am doing
and it will give you 12 watts or less if you want
On 12-09-16 9:14 PM, Mike Weir wrote:
I have a small desktop regulated power supply rated at 13.5 volts DC nominal,
3.0 amps max continuous, 5.0 amps max. Can I use this to run the KX3 while
it's desktop?
welcome to the list, and as a newbie as well, i really understand where
you are at.
fr now to charge the battery, you must use an external charger (if you
are using the 8 AA internally)
and play with it, i don't think you can hurt it as long as you what is
reasonable
On 12-08-06 8:03 PM,
i am also a newbie (i was the one who asked where the volume control
was...boy did i get flack for that one)
but i must tell you the manual could be really revamped up, to the point
that newbies can use it. right now, you may think that it is designed
with less experienced operators, but , in
Neil (ZLP electronics) has the KX3 cables for his *DigiMaster ProTwo
Digital DATA **
this CAT/Soundcard etc box
I have no financial benefit from this, except i just ordered the box. i
will let you know how it works as soon as i kick the tires
*
it has yet to be implemented within the firmware.
you can see what is and what is still to be done, on the elecraft website
On 12-07-05 10:56 PM, Tony Estep wrote:
I'm having a great time figuring out all the ins and outs of my KX3. One
thing I haven't figured out is how to work the voice
For domestic shipment (us) the ups does a better job in tracking, and delivery.
But costs are higher then USPS
Outside the us, might as well hang over your wallet if shipping ups.
Once I got promotional material for a trip I was organizing for a social club
(read free). Usp charged me 50$ for
wayne/eric
i know others have said this, but i think a pat on the back from us
customers to your office staff can not be repeat enough times.
so what i think would be nice if you forward to them all the comments (i
hope)that will follow, so they know they are appricaited
Bob
This is forwarded to the list as it was only sent to me, and I do not have an
answer. Maybe someone else does on the list
Sent from my iPad
On 2012-05-22, at 23:52, Bob wb4...@gmail.com wrote:
Has anyone found a 3.5mm 4-conductor cable with shield in what I would call a
traditional
1) i was trying to set up a dipole antenna to get my first QSO. i was on
40 m and as i was tinkering with my head ]phones
i noticed that i had a 0.1 drift on the LCD readout VFOA. the readout
had dropped by that much.. in fact it did more then once. i would tune
to a freq, and then listen
On 12-05-23 10:25 PM, ~BG~ wrote:
Is yours a factory build or kit?
#33 factory built
Mine's a kit and I while building it, the
full-turn spacing for the inside nut for the VFO encoder was a bit far for
mine to make contact. I noticed that while adjusting the VFO, that it
would sometime
so just came back from Dayton and found out a couple of things.
1) neither west mountain nor signallink external sound cards have cables
for the new KX3
2) so given that i will try to set up the radio with using the internal
IMAC stereo line in for digital But the manual is light on the set
PM, Robert Galambos wrote:
so just came back from Dayton and found out a couple of things.
1) neither west mountain nor signallink external sound cards have cables
for the new KX3
2) so given that i will try to set up the radio with using the internal
IMAC stereo line in for digital
Ok. Silly question. While I understand that the k3 and the kx3 are different
implementation, software wise. When should we expect, at least a beta, of this
new feature on the portable?
Not that you want me to be a beta, just asking for the group.
And sorry if it has been asked before
Sent
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
got it to work BUT now, even when i clicked on 'versions now' (firmware
tab) the 'available' stats is 'missing'
and yes, i do have connectivity and no firewall
check for new
On 12-04-25 12:23 AM, David Fleming wrote:
Also, if Fusion is still running, you will need to disconnect the
tried the mac version of the KX3 utility. it did not work
and here is the senerio.
i have fusion. running windows 7 i have no problem connecting to the
utility. it recognizes the USB driver ( in my case COM3) update firmware
etc works
so now after installing the USB driver on the mac side,
wondering what the estimated time for the availability of both the
battery charger and the RAM mount for the KX3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
while i can not say that the wire management is great, what i did was go
to home depot/reno depot and bought some 'cable cuff' (they can 'tighten
up' all the lose cables.)
they are cheap and when labels can help with at least taming the octopus
On 12-03-25 8:01 AM, Pierfrancesco Caci wrote:
http://www.elecdesign.com/Articles/ArticleID/10751/10751.html
*Electronic Design Magazine Article Why I Design, by Wayne Burdick
http://www.elecdesign.com/Articles/ArticleID/10751/10751.html
*
__
Elecraft mailing list
Home:
on the main page, if you click on *Buy Pre-Wound Toroids*
http://elecraft.com/www.elecraft.com/Apps/ToroidGuy/toroidguy_prewound_toroids.htm
you get a 404 error
http://elecraft.com/www.elecraft.com/Apps/ToroidGuy/toroidguy_prewound_toroids.htm
One change need. The URL for HRD is pointing to the 'old' rather then the new
URL from the people who bought the code from Simon
Or so I believe
Sent from my iPad
On 2012-03-04, at 18:33, Wayne Burdick n...@elecraft.com wrote:
A preliminary version of the KX3 Owner's Manual can now be
its been about a week, so my question will the KX3 manual be coming soon?
it would answer alot of questions that are being asked on these lists
(HINT HINT)
__
Elecraft mailing list
Home:
first of all i want to thank everyone on their opinion. it will open
some avenues that i was not aware of
some additional info, if one cares.
my principle computer is an IMAC though i run fusion so there is no
issue with a windows solution(s)
i probably will not go CW, even though it would
Does this also go for the KX3.
just wondering what the different options we have with the new rig
On 12-02-06 2:07 PM, Mitch Wolfson DJØQN wrote:
Jorge,
The standard RemoteRig RRC set supports the K3 Twin mode, there is not
a separate one hardware-wise, like there is for Yaesu.
There is a
on the teaser for the KX3 there is mention of a ram mount.
1) when will that be available?
2) there are different connectors in the ram mount series, if one wants
to start looking at suppliers etc, what ram mount connector will the KX3
be able to connected to.
what would the postage to Canada be so i can send you the right amount?
On 12-01-14 4:23 PM, Rose wrote:
Several have asked ...
Yes, the cover allows all cables to remain
connected when the dust cover is in place.
88/73!
Rose - N7HKW
elecraftcov...@gmail.com
Unfortantly I do not have the time, work, and the equipment to build my own
So aim looking for an easy, all encompassing solution to my issue ( read my
wife wellbeing which means mine sanity)
Sent from my iPad
On 2011-12-29, at 7:51, Don Wilhelm w3...@embarqmail.com wrote:
Joe,
Only a
The kx3 price list is on a non public web page for now.
Shipping according to that page is late feb.
Sent from my iPad
On 2011-12-28, at 6:58, Steve KC8QVO kc8...@yahoo.com wrote:
The KX3 page doesn't show ordering in Dec, shipping in late January/Early
February anymore.
I just checked
CW... with my aging hands, that is not an option, so its digital that i
figure would be the best solution (with headphones on the off chance i
get some SSB)
On 11-12-28 10:42 PM, Ron D'Eau Claire wrote:
It may not be a option for you, but that's where CW and headphones really
work great.
i to order a unit.
but i have a question for those in the know.
will the unit come with a power cable/voltage supply so it can be used
as a base station as well (with the 10W PEP as advertised)
or is the only item (optional) the recharge unit? available
also note the dust covers can also be
Robert Galambos
Compuware Senior Technical Specialist
IBM Certified Solutions Expert -
DB2 UDB for OS/390 V7 Database
Administration
robert.galam
31 matches
Mail list logo