I know this is long shot, but,
Does anyone have a spare; good; KPA500 LPF BOARD?
If so, are you willing to part with it?
Thanks 73's
Ron Durie
WB4OOA
704-843-3681
wb4...@gmail.com
__
Elecraft mailing list
Home: http
THE K3S AND P3 are sold. Thanks. 73's
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
wb4...@gmail.com
-Original Message-
From: Ron Durie [mailto:wb4...@gmail.com]
Sent: Friday, September 11, 2020 12:29 PM
To: 'elecraft@mailman.qth.net'
Subject: FS K3S with P3
My K3S SN:10684 Has
nion this is the most accurate spectrum monitor on the market
today.
All Connector Pins (on both units) have been treated with Caig DeOxit
solution for reliable performance.
Total package price: $3395.00 shipped to CONUS.
My Email: WB4OOA at gmail.com
Ron Durie
WB
DCHF-2000 coupler (only) for the W2 wattmeter for sale.
Includes cable. In like new condition.
$140 Shipped to CONUS.
PayPal preferred but checks also ok.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
WB4OOA at gmail.com
DCHF-2000 coupler for the W2 wattmeter for sale.
Includes cable. In like new condition.
$150 Shipped to CONUS.
PayPal preferred but checks also ok.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
WB4OOA at gmail.com
Updated
W2 in Like new condition; surplus to my needs.
Included: DCHF-2000 coupler; manual; and all cabling.
$285 plus shipping to CONUS.
Like new condition; DCHF-2000 coupler also for sale.
$175 Shipped to CONUS.
PayPal preferred but checks also ok.
Ron Durie
WB4OOA
Elecraft K
W2 in Like new condition; surplus to my needs.
Included: DCHF-2000 coupler; manual; and all cabling.
$285 plus shipping.
Like new condition; DCHF-2000 coupler also for sale.
$175 plus shipping.
PayPal preferred but checks also ok.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
Does anyone have an Elecraft KANT3 blank board that they no longer need?
I am repairing a K3 and need it to run the K3 without its KAT3 internal
tuner.
Thanks.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
WB4OOA at gmail.com
the trap or removing it completely and jumper the board.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
wb4...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
NO. Solid state amps do not need inrush protection. 73's
Ron WB4OOA
Elecraft K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Very well stated, Bob.
I like precision loads especially for calibrations and repairs.
I am surprised at how many Hams that do not even own a Load; let alone a
good one.
A good Load is one of the most important troubleshooting aids in the Ham
Shack. 73's
Ron Durie
WB4OOA
Elecraft K-Line
Yes, it will. See K4 FAQs.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
UT I do also apply 2 inch lbs. of
torque.
This keeps them from working loose with vibration and prevents oxidation.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Just installed new Firm-Ware Version 2.17.
It has solved all the digital wattmeter anomalies and is working perfectly
here.
I recommend this version for next standard Firm-Ware update.
Thank you. 73's
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
.
I think this could be easily fixed in a Firm Ware update. 73's
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Dirk off line at: 828-729-0148 WB4OOA Ron
704-843-3681
Ron Durie
WB4OOA
Elecraft K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
If interested, contact K4DJJ Dirk off line at: 828-729-0148 or n6svc at
charter.net
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I am listing these for my friend: K4DJJ Dirk.
He uses his KX3 and these are surplus to his needs.
All in Excellent condition; nonsmoking; one owner.
K3/100 $1795S/N: 3514One 2.8khz 8pole filter.No other
options.
P3 -- $495 No options.
W2 - $195
If
If interested, call me; or contact me off line. I am good in QRZ.
Ron Durie
7715 Radin Rd
Waxhaw, NC 28173
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Correction in Subject line; KAT500
I am listing these for a Ham friend.
He uses his KX3 and these are surplus to his needs.
K3/100 $1895
P3 -- $595
W2 - $220
KAT500 --- $495
If interested, call me; or contact me off line. I am good in QRZ.
Ron Durie
WB4OOA
Elecraft K
I am listing these for a Ham friend.
He uses his KX3 and these are surplus to his needs.
K3/100 $1895
P3 -- $595
W2 - $220
KAT500 --- $495
If interested, call me; or contact me off line. I am good in QRZ.
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
THANK YOU Elecraft and all responsible for the new KPA1500 Firm Ware Ver.
1.78.
I love the new variable peak hold mode on the metering. It is extremely
helpful.
The KPA1500 is a wonderful amp.
Ron Durie
WB4OOA
Elecraft K3S-Line
's
Ron Durie
WB4OOA
Elecraft K-Line
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
My KPA-1500 order is processed and shipped, with a UPS tracking number.
It was ordered on February 26, 2018.
It is supposed to arrive in 5 days. I will let you know next when it
arrives. 73's
Ron Durie WB4OOA
Elecraft K-Line
ready to ship.
Selling both units together only.
$2200 shipped USA.
Ron Durie
WB4OOA
Elecraft K3s-Line IMD
704-843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
For sale: KPA500 - S/N 0127 KAT500 - S/N 0227
Mint condition; One owner; Non-smoking; Wired 240v;
With all upgrades; Latest firmware; Cables; and Manuals.
Picture on my QRZ site.
Both units are boxed ready to ship.
Selling both units together only.
$2200 shipped USA.
Ron
For sale: KPA500 - S/N 0127 KAT500 - S/N 0227
Mint condition; One owner; Non-smoking; Wired 240v; With all upgrades;
cables; manuals. $2200 shipped USA.
Email Ron Durie WB4OOA@gmail dot comCall 704-843-3681
the price ($4200) of the KPA500, it would have
some market.
Ron Durie
WB4OOA
Elecraft K3s-Line IMD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
5000
Contact me off line:rond at kastanet.org
Ron Durie
WB4OOA
Elecraft K3s-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elec
PROBLEM SOLVED. Received from Elecraft today a new front panel board;
installed it and all is working normal again.
The new board arrive just under 48 hrs. from when it was requested,
traveling from CA to Waxhaw NC.
Unbelievable service from Elecraft and USPS. I will send the bad board back
support
from Elecraft.
One reason I continue to choose products from Elecraft.
Ron Durie
WB4OOA
Elecraft K3s-Line
(704) 843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Has been working perfectly for almost 3 months.
The backlight is working ok but no display digits at all.
The rest to of the radio is all working normally.
Parameter Initialization made no change.
Tomorrow I plan to remove the front panel and check all the connector pins.
Has anyone had this
Ron Durie
WB4OOA
Elecraft K3s-Line
(704) 843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
ower cable; Allen wrenches; PA Jumper; and manuals.
Pictures available.
$2495.00 plus $20 shipping CONUS. PayPal; Bank check; or personal Check.
Contact me off line at: WB4OOA at gmail.com
Ron Durie
Elecraft K3s-Line
__
Elecra
Pole Power cable; Allen wrenches; PA Jumper; and all manuals.
Contact me off line at: WB4OOA at gmail.com
$2695 Shipped CONUS. PayPal preferred; Check when cleared; and pictures
available upon request.
Ron Durie
Elecraft K3s-Line
_
Elecraft K3/100; Late #7504, which includes all factory upgrades.
This is an excellent useable K3, out of the box.
K3SYN3AUPG newest Synthesizer option installed. This significantly improves
receiver performance.
KXV3A Receive ANT IF out and XVRTR Interface board.
KIO3 I/O board option.
Elecraft K3/100; Late #7504, which includes all factory upgrades.
This is an excellent K3, out of the box.
K3SYN3AUPG newest Synthesizer option installed. This significantly improves
receiver performance.
KXV3A Receive ANT IF out and XVRTR Interface board.
KIO3 I/O board option.
Elecraft K3/100; Late #7504, which includes all factory upgrades.
This is an excellent useable K3, out of the box.
K3SYN3AUPG newest Synthesizer option installed. This significantly improves
receiver performance.
KXV3A Receive ANT IF out and XVRTR Interface board.
KIO3 I/O board option.
Elecraft K3/100 #7504, which includes all factory upgrades.
This is a good basic K3 that won't take much to Option up.
K3SYN3AUPG newest Synthesizer option installed. This significantly improves
receiver performance.
KXV3A Receive ANT IF out and XVRTR Interface board.
KIO3 I/O board
ble; Allen wrenches; PA Jumper; and all manuals.
Contact me off line at: WB4OOA at gmail.com
$2795 Shipped CONUS. PayPal; add 3%. Check is ok when cleared. Pictures
available upon request.
Ron Durie
WB4OOA
__
Elecraft mailing list
Elecraft K3/100 #7504, which includes all factory upgrades.
This is a good basic K3 that won't take much to Option up.
K3SYN3AUPG newest Synthesizer option installed. This significantly improves
receiver performance.
KXV3A Receive ANT IF out and XVRTR Interface board.
KIO3 I/O board
resistance.
Includes power cable with PowerPoles attached; Allen wrenches; PA Jumper;
and all manuals.
Contact me off line at: WB4OOA at gmail.com
$2895 Shipped CONUS, or $2795 with 2 old synthesizers. PayPal; add 3%.
Check is ok when cleared.
Pictures available upon request.
Ron Durie
WB4OO
; AM; 2.8 KHz 8 pole; 2.7 KHz 5 pole; 500 Hz
8pole.
Sub Receiver filter: 2.7 KHz 5 pole.
$3200 plus shipping to CONUS only.
Contact me direct at: WB4OOA at gmail.com
Ron Durie
(704) 843-3681
__
Elecraft mailing list
Home: http
option.
Main Receiver filters: FM; AM; 2.8 KHz 8 pole; 2.7 KHz 5 pole; 500 Hz
8pole.
Sub Receiver filter: 2.7 KHz 5 pole.
$3300 plus shipping to CONUS only.
Contact me direct at: WB4OOA at gmail.com
Ron Durie
(704) 843-3681
option.
Main Receiver filters: FM; AM; 2.8 KHz 8 pole; 2.7 KHz 5 pole; 500 Hz
8pole.
Sub Receiver filters: 2.7 KHz 5 pole.
$3300 plus shipping to CONUS only.
Contact me direct at: WB4OOA at gmail.com
Ron Durie
(704) 843-3681
urate, for a
service bench environment. I have one running on my service bench. It
works fine on the K3, however it is over-kill for the K3 and it is complex
with several boxes and a GPS antenna, etc. etc.
Ron Durie
WB4OOA Elecraft K
.
This will continue until I stop transmitting, then it will be ok for a
while, then does it again.
A friend is also experiencing this same bug on his P3TXMON.
Anyone experiencing this same thing?
Ron Durie
WB4OOA Elecraft K-Line
__
Elecraft
.
The Receiver Dynamic range has been improved.
The close in performance numbers have improved for the 2kHz spacing.
Thanks for a good new upgrade Wayne and Eric.
Ron Durie
WB4OOA Elecraft K-Line
__
Elecraft mailing list
Home
allows the connectors to insert easier and provides very low contact
resistance.
Contact me off line at: WB4OOA at gmail.com
Ron Durie (704) 843-3681
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input
New Kit cost is:
Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input
New Kit cost is:
Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input
New Kit cost is:
.
This prevents pin Oxidation and intermittent connections.
This also allows the connectors to insert easier and provides very low contact
resistance.
Contact me off list at: WB4OOA at gmail.com
Ron Durie
(704) 843-3681
__
Elecraft mailing
You have (built into the K3), a Receive only, 8 band equalizer.
It will allow you to customize the receiver so that it will sound the way you
like it.
Works great for me.
Don't forget that hiss you hear is the normal part of the Excellent Dynamic
Range of the K3 Receiver.
Ron Durie
to the new KAT500 next.
My Best Regards to all of you at Elecraft.
Ron Durie WB4OOA
K-Line K3 #6175; P3 #88; KPA500 #127
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Has anyone been able to successfully use the P3 with the Kenwood TS-590S ?
Ron Durie WB4OOA
K-Line - K3; P3; KPA500
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Original owner K3. The Serial Number is: 604.
This K3 includes all factory modifications; all updates; and documentation.
All options are installed except the second Receiver option, and the External
Reference oscillator input option.
Options included:
K3/100 100w Transceiver
KAT3
It sold within the first few hours of my listing it.
Ron WB4OOA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
THANKS for the new web site home page etc. It is so much easier to navigate.
Best Regards to all at Elecraft.
Ron WB4OOA
K3 604 and 6175 P3 88 KPA500 127
__
Elecraft mailing list
Home:
I am selling my used but LIKE NEW K3. Serial Number: 604
Includes all factory modifications; all updates; and documentation.
Options included:
K3/100 100w Transceiver
KAT3Automatic Antenna Tuner
KTCXO3-1TCXO 1ppm f/w correction to 0.5 ppm
KXV3A RX Ant., IF Out Xverter
I am selling my used but LIKE NEW K3. The Serial Number is: 604.
This K3 includes all factory modifications; all updates; and documentation.
The options included are:
K3/100 100w Transceiver
KAT3Automatic Antenna Tuner
KTCXO3-1TCXO 1ppm f/w correction to 0.5 ppm
KXV3A RX
I want to sell my used but LIKE NEW K3/100. The Serial Number is: 604.
This K3 includes all factory modifications; all updates; and documentation.
It has all the Options installed except the External Reference option.
Contact me off the reflector at: rond at kastanet dot org
Ron WB4OOA
is important for removing
power totally from the KPA500.
This is good to know when there are storms in the area, etc.
73's Ron Durie
wb4...@arrl.net
www.durie.us
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Thanks Don,
That helps to further explain the design criteria and makes perfect sense.
Ron Durie
IT BUYER JAARS INC
704-843-6011
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Saturday, July 30, 2011 9:16 PM
To: Ron Durie SIL.org
Cc: Elecraft@mailman.qth.net
My KPA500 Kit Serial Number: 0127 arrived, via UPS, at 8:30pm July 5, 2011.
Building it now. All the parts are accounted for.
Ron Durie
WB4OOA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Ordered on Sep 15 in the morning.
Serial Number: 00088
All parts present and accounted for. Hope to have it on the air tonight.
73's Ron Durie
K3 #604
PS #088
wb4...@arrl.net
www.duries.com/DurieElectronics.htm
__
Elecraft
a pleasure to use.
I can't wait for the P3. That will complete the K3 very nicely.
73's Ron Durie
WB4OOA
Elecraft K3/100 # 604
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
better
when Elecraft enables the 1ppm TCXO Option in Firm Ware.
This will (for all practical purposes) eliminate the errors due to
temperature changes.
The more I use my K3 and the more I learn about it the more I like it.
This is a very exciting and satisfying radio. Thanks Elecraft.
73's
Ron
I too have upgraded my K3 # 604 to every new beta Firmware version as soon
as it is posted.
I have had no problems. Elecraft is doing an excellent job with the
Firmware.
Ron Durie
WB4OOA
___
Elecraft mailing list
Post to: Elecraft
Thanks for your excellent trouble shooting and solution Roy.
I installed a rubber grommet in each speaker mounting hole.
This isolates the speaker from its mounting hardware and the top panel.
Now it is a pleasure listening to the internal speaker with NR on or OFF.
I am enjoying this
more memory locations.
I am sure Elecraft is re-thinking the total frequency management scheme to
see if it can be made more intuitive for us all.
I really like my K3. It is neat to have the flexibility that downloaded
firmware provides.
Ron Durie
WB4OOA
K3# 604
of the pins.
This keeps the contact resistance low.
It's a good thing.
Ron Durie
WB4OOA K3 #604
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Todd,
I had the exact same problem when I tried to use my K3 with my
amplifier.
I did not have a ground on the K3. This was a test in a high RF
environment.
When I grounded the K3 the problem disappeared.
When I grounded the power supply the problem disappeared.
I now have both grounded.
K3/100 #00604Kit version; arrived in good condition on March 21, 2008.
It was ordered on Aug 30, 2007
Ron Durie
WB4OOA
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
Katie, sent me an email last night that said my new K3/100 (kit) will be
shipped in 10 to 13 days.
It was ordered Aug 30.
They are doing a great job working off the backlog of orders.
It won't be long now. I am getting excited. J
Ron Durie
WB4OOA
Is it be possible for the K3 FIRMWARE to provide a 10 minute timer function
using the Real Time Clock?
Ron Durie
[EMAIL PROTECTED]
www.durie.com/DurieElectroncs.htm
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
What is the operating frequency of the K3 TCXO reference oscillator?
Ron Durie
[EMAIL PROTECTED]
www.duries.com/DurieElectronics.htm
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
77 matches
Mail list logo
