I have the first edition of the ARRL book. What is significant about the
second edition that is different from the earlier edition?
Russ, N3CO
Sent from Yahoo Mail on Android
On Fri, Jul 28, 2023 at 7:14 PM, Jim Brown wrote:
On 7/28/2023 1:31 PM, Al Lorona wrote:
> Please don't la
My thinking was to restore from an earlier workspace then reinstall the
IC-7300 but I will take a look at the controls first. I don't remember
making any recent changes to to the control configuration.
Russ, KG7VQ
__
Elecraft
, and go over the configuration again.
Thanks for the suggestion.
73
Russ KG7VQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
and computer are shut down when not in use and the k3 is routed to a
dummy load. The computer is powered on first.
As I mentioned it's not every time but seems to be more often then not.
Thanks for any advice.
Russ, KG7VQ
__
Elecraft
After returning from Elecraft for repair and updating my K3 (1087) will
reset it's Mic gain to 1 and Compression to zero.
I backed up the radio's configuration when I get it back and reloading
it does not solve the problem, which occurs at boot up more times then not.
This is a barefoot
Hello Pete:
I have some thru-hole 2N7000 in my junk box. I can mail a couple to you if you
want.
Russ, N3CO
On Thursday, October 21, 2021, 09:57:50 AM EDT, Pete Smith N4ZR
wrote:
The original surface-mount part seems to be back in stock in the US, but
I'm afraid that what I need
used Rev. A1,
June 24, 2015 instructions which have an error. Figure 13 shows adding the
0.1uF caps to C2, C3 and C6. I downloaded Rev. A2 June 29, 2015 which
correctly shows in fig. 13 to piggyback caps on C4, C3 and C6. Problem solved!
Russ, N3CO
On Monday, April 19, 2021, 09:04:58 PM EDT
to 2.10999
transition. So there is definitely something in the low band signal path that
is attenuating the signal. I'll also do some checking at the other freqs. I
guess it's time to drag out the scope for some signal tracing which should be
fun with SMDs and my old eyes.
Russ, N3CO
and "nor" I verified that there is
no change in signal levels. On the surface it appears that I purchased a
broken used KBPF3. Now I really have to take things apart to figure out what's
wrong.
Russ, N3CO
On Tuesday, April 20, 2021, 07:23:37 PM EDT, Brian Hunt
wrote:
This thread also
t to check if the mods were done correctly before
proceeding. Thanks for your information.
Russ, N3CO
On Monday, April 19, 2021, 09:04:58 PM EDT, ab2tc wrote:
Hi Russ,
Your response made *very* curious so I checked out my own K3S. I can confirm
the two switchover frequencies you men
al
levels at the switchover points (ignorance is bliss). I wonder if anyone else
has ever noticed this or do I have an issue with my KBPF3?
Russ, N3CO
On Friday, April 16, 2021, 12:39:28 PM EDT, w4sc
wrote:
Looking for details of switch over frequencies and expected performance of t
Thanks Don. To clarify the thread, I was reading infinite resistance.
Russ
KG7VQ
On 6/24/2020 9:53 AM, Don Wilhelm wrote:
Russ,
Your statement of "no resistance" is misleading. Several hams use
that to indicate infinite resistance - because of the way their meter
reads (bla
Thanks Don. That confirms the notion I had about needing the replacement
kit.
Russ
KG7VQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
resistance meets these criteria but I'm not sure that's a proper
interpretation.
k2 is second hand No. 01112
firmware 2.04
Thanks for any clarification.
Russ
KG7VQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
, 40M-14A,
15M-13.6A, 10M-13A. All readings were in the tune position using a LP-100. I
don't think the higher reading on 20 (or 160) is really significant.
Russ, N3CO
Sent from Yahoo Mail on Android
On Fri, Jun 19, 2020 at 1:55 PM, Mike Maloney wrote:
FWIW, my old K3 (Nov'08) only pulls
into the what if.
Russ
KG7VQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
thoughts.
Russ
KG7VQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
I understand you may be looking for a bargain on one. They are still
available for sale, but can be a bit hard to find. I see them when going to
Quick Order, then K3 Upgrades.
https://elecraft.com/pages/k-line-transceiver-k3-k3s
-
73, Russ - W9RB
--
Sent from: http://elecraft.365791.n2
It seems the K1 and KX1 hold a fairly high value on the used market after
their demise. I'm hoping the K3 follows suit, so I can upgrade to the K4
later :)
-
73, Russ - W9RB
--
Sent from: http://elecraft.365791.n2.nabble.com
56" for the original cable is quite long. What gauge cable are you using?
Russ, N3CO
Sent from Yahoo Mail on Android
On Tue, Jun 25, 2019 at 10:05 AM, Everett via
Elecraft wrote: Hi Jim,
You brought up a good point that I had not thought of and that is the voltage
drop at the K3S i
Yup
A little bit of common mode
Russ KD4JO
Sent from my T-Mobile 4G LTE Device
Original message
From: Clay Autery
Date: 6/7/18 5:16 PM (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Heil 600 ohm balanced mic (PR40) connecting to rear
And if for some
like Belden 9077?
https://catalog.belden.com/techdata/EN/9077_techdata.pdf
We used it when I worked for Palmer Cablevision in Naples, FL in the early 80's
13 channels on one, 13 on another with a switch on top of your TV...
Russ KD4JO
-Original Message-
From: elecraft-boun
uot; where it enters the mixer and leaving the
input floating for CMRR. The mixer's impedance is 10K (resistive - no xfmr)
bridging.
Thanks, Russ KD4JO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Sent: Tuesday,
hain.
For my airchain, I use a AirCorp 500 PH Pro Announcer Mike Processor which, as
a pro device, has internal RFI mitigation.
Most processors used for broadcast have this LF RFI mitigation so they can be
used at a co-located AT tx/studio site.
Russ KD4JO
Alan
I will be installing a Rolls MX28 mixer today for monitoring SO2R with a second
Rx - a JRC NRD 525.
Ill let the group know how it goes
Russ KD4JO
Sent from my T-Mobile 4G LTE Device
Original message
From: G4GNX <g4...@g4gnx.com>
Date: 1/13/18 7:20 AM (GMT
Correction - it’s a 24VDC Meanwell - sorry. Still works OK
Russ KD4JO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of kg9hfr...@gmail.com
Sent: Thursday, December 7, 2017 1:21 PM
To: John Stengrevics <jsteng
YES
Now lets dump the spell check
Russ
Sent from my T-Mobile 4G LTE Device
Original message
From: K9MA <k...@sdellington.us>
Date: 11/7/17 7:46 PM (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Lightning damage
Not lightening, LIGHTNING!
--
Scott
.
This is in no way a negative post - just looking for guidance.
Russ KD4JO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Marvin Wheeler
Sent: Sunday, June 4, 2017 7:23 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3S Noise Blanker
, who presented a paper at Dayton
a couple of years ago.
Russ KD4JO
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug
Person
Sent: Monday, May 15, 2017 10:15 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Hallicrafters HA-1 with O/T
(no kids anyway) build
hardware
Russ KD4JO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Folks:
Not exactly Elecraft, but I am restoring the HA-1 tube keyer copy that I built
from scratch as a kid in 1970.
The tubes have all lost their markings (and maybe their functionality).
Does anyone have a schematic (or manual)?
Thanks, Russ KD4JO
rx feed resistor too?
Is the main rx feed double terminated with the addition of the transverter,
thus needing additional drive?
Tnx,
Russ KD4JO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
the K3EXREF came out).
Now the needy/horse trading part :)
Anybody want to trade a K144REFLK board for my KXV3A (I already have one in the
K3).
I also need a KFL3B-FM 13 kHz crystal filter
Thanks, Russ KD4JO
__
Elecraft mailing list
Home: http
Hi:
Does anyone have a KFL3B-FM 13 kHz FM Filter that is excess to their needs?
I picked up a K144XV-K at a hamfest this last weekend..
Thanks,
Russ KD4JO
From: Russ
Sent: Monday, September 12, 2016 4:38 PM
To: elecraft@mailman.qth.net
Subject: Independent
The Koss SB45 has been working great for me and cheaper than the CM500. You
can get them on Amazon for less than $30. Russ, N3CO
From: Bill Gaines <a...@wcoil.com>
To: elecraft@mailman.qth.net
Sent: Monday, December 5, 2016 4:46 PM
Subject: [Elecraft] Headset/Mic Suggestions
control of the speaker
and HP.
I could always add an amp to the SP3…….
I’ll just order an Elecraft knob for the pot…
Russ KD4JO
PS - Back to the original thread name ☺
From: Charles R.Tropp [mailto:charlestr...@yahoo.com]
Sent: Tuesday, September 13, 2016 6:31 AM
To: Russ <mundschen...@msn.
;ring" to control the speaker amp level. My understanding is
that the speaker out and HP out's are fed by separate DAC's.
Thanks, Russ KD4JO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
that I will lose the individual
volume control versatility I have.
If this is the case - would it be possible to repurpose the sub-rx (I don't
have one) AF gain "ring" to control the speaker amp level. My understanding is
that the speaker out and HP out's are fed by separate DAC's.
Th
If you are going to use a compressor, use a moisture/condensate trap like you
would use with a paint spray gun.
Those air tanks get full of water. And yes, of course keep the pressure way
down!!
Russ KD4JO
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net
-PACE-ST50-with-handpiece-and-extra-Tips-3-FREE-SHIPPING-/231974507997?hash=item3602c215dd:g:YYoAAOSwvg9XWQEx
Russ KD4JO
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eddy Avila
Sent: Monday, June 13, 2016 1:00 PM
To: Elecraft <elecr
Do you have the new KSYN3A? I just experienced a similar problem but tapping
on the case didn't solve anything. Elecraft support determined I have a bad
synthesizer. Russ, N3CO
From: John K9UWA <j...@johnjeanantiqueradio.com>
To: Mailman <elecraft@mailman.qth.net>
Se
good audio reports.
After 8 years I did recently splurge and upgraded to the Koss SB-45 which
works great. Russ, N3CO
From: Bob McGraw K4TAX <rmcg...@blomand.net>
To: elecraft@mailman.qth.net
Sent: Friday, February 12, 2016 8:08 AM
Subject: Re: [Elecraft] K3S Microphones
For the rope, try qualitynylonrope.com I'm not sure if they have grey or brown
but I bought a 500ft spool of 3/16" black polyester for $42. AND they have
free shipping for orders over $25. Russ, N3CO
From: Clay Autery <caut...@montac.com>
To: elecraft@mailman.qth.net
Sent
stations. The
level of intermod changed quite noticeably switching between the output amps.
The KPA3 and LP are using different switching diodes for the TR switch.
Russ, N3CO
From: Jon Zaimes <j...@verizon.net>
To: 'Vic Rosenthal 4X6GP/K2VCO' <k2vco@gmail.com>
'entities', but I don't expect other club members to subsidize that.
So, I think we are all in agreement. Save our Club's money for other worthy
DXpeditions in 2016/2017.
Russ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
elecraft-requ
laptop. Thanks Russ K5OA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
s complete. Sometimes I get the correct
frequency in the response, sometimes only an "FA". Manual frequency change
from the K3's front panel does not seem to be acknowledged. FA followed by the
frequency does effect a frequency change.
Is there a use group dedicated to UART K3 control?
Thanks Sverre...
Since I have a Mini-Circuits splitter - I'll give it a try to prevent a double
termination and 2-1 VSWR
Russ KD4JO
Date: Tue, 25 Aug 2015 12:52:41 -0700
From: la...@nrrl.no
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Aux RF mod for Rx out (No Sub-Rx)
I'm using
- albeit insignificant
For those of you who are more familiar with the topology of the K3 - is there a
simple way to accomplish #2 without buggering up the rig?
Thanks, Russ KD4JO
__
Elecraft mailing list
I have been working with new K3S-P3 along with the Remote Rig 1258 MKII K3
Twin system. Input received from a few on the line here so wanted to give a
short report. Goal was to have both full local and remote control of the
K3S-P3 with as few cable swaps as possible. I am using the W3YY FSK-CW-PTT
Loaded 1.50 per notes given here and see the DBM reading on p3 ending in 9
but on VGA display ending in 0.
Beta loaded without error.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
for
it - can the old KSYN3 and the new KSYN3A coexist in the same box? OK - call
me cheap / thrifty / cost effective or just stupid if you want :}
Thanks, Russ KD4JO
__
Elecraft mailing list
Home: http
Will my old K3 #732 work with my Vibroplex or will I need the K3s? I want to
make sure I have all the latest. Or I guess I could just use my HT-32As. Russ,
N3CO
From: ARRL - N6MQL n6...@arrl.net
To: elecraft@mailman.qth.net
Sent: Saturday, May 16, 2015 1:40 PM
Subject: [Elecraft
power bandpass or high pass
filter, or just ignore it and stay away from 1840. I guess I'll have to
seriously consider the first option.
Russ, N3CO
On Tuesday, November 11, 2014 9:38 AM, Joe Subich, W4TV li...@subich.com
wrote:
What helps - increasing current in diode switch on KPA
between low and high power.
Can anyone explain this or is something broke in my K3?
Thanks,
Russ, N3CO
On Thursday, October 23, 2014 4:52 PM, Joe Subich, W4TV li...@subich.com
wrote:
Maybe, and if you're right, my suggestion may not help. But you
misunderstood my suggestion
setup. I
disconnected all cabling on left side , turned it off and on. I see no error
messages ?
Everything is normal with the Ten Tec Orion2 and the N0XAS UKA-2 adapter
as before, so I feel the problem is with the KX-3 sending in the ground.
Any help with this is appreciated .
73’s Russ
HI, I AM PLANNING ON INSTALLING THE VE7FMN HEAT SINK TO MY KX3. WILL THIS
INVALIDATE MY KX3 S/N#4049 WARRANTY?
RUSS K9VON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Thanks for the help. The parameter initialization did it. This is the
first time I have had to do this and I pretty much figured I had changed
something inadvertently. I probably did, but this cut to the chase so i
wasn't trying to find out which one.
Once again thanks.
Russ Edelen, KG7VQ
, checked the rear cables, reloaded the current firmware and
adjusted the RF gain on the K3 with no change. I have been running
firmware 1.26 for some time with no problems.
Serial number is 682 with no VGA adapter. Any suggestions?
Thanks.
Russ- KG7VQ
I'M USING MY MAC ,WITH OS X 10.8.4 AND DID A UP GRADE TO MY KX3 (#4049) WITH NO
PROBLEMS. EVERYTHING WORKS GREAT THANK YOU FOR PUTTING OUT A GREAT PRODUCT AND
GREAT SUPPORT.
RUSS K9VON
__
Elecraft mailing list
Home: http
I see Edit Power On Banner, in the configuration menu. What is this banner
thing going to do? What do I put in it?
Thanks Russ K9VON KX3 # 4049
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
1.36 DSP 01.05
Thanks I's easier then I thought,
73's Russ K9VON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
on the standoffs? It lays perfectly flat on the standoffs as
long as the holes don't match up.
Thanks.
73
Russ
WD5RS
Elecraft K2 #6997
10-10 #37287
FISTS #9162
Grid EM12mc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Scott;
Thanks, I guess I'll have to wait until Gary gets back. My voltage readings
are all OKand I've tried a reload of the firmware 3 times with no luck.
Russ N3CO
- Original Message -
From: Scott Ellington sdell...@facstaff.wisc.edu
To: Russ eru...@att.net
Sent: Tuesday, March 15
of
the current sense U1 and it is correct.
Anyone have any ideas???
Thanks,
Russ
N3CO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
The ad says 44 43 materiel. Going by the P/N it looks like #43 ferrite.
Russ,
N3CO
- Original Message -
From: Jim Sheldon w...@cox.net
To: ab2tc ab...@arrl.net; elecraft@mailman.qth.net
Sent: Wednesday, January 19, 2011 11:21 AM
Subject: Re: [Elecraft] OT: Big Ferrite Split Beads
. Can I
put this IC in an 8 pin header rather than soldering it to the board?
Russ
WD5RS
10-10# 37287
FISTS 9162
Grid EM12mc
K2 #6997
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Aloha group. I have K-3 #4358 and am attempting to connect my Yaesu FL-2100B to
the K-3. Any help on the ALC connection? Thanks in advance. Russ DarlingKH7SThe
Big Island
__
Elecraft mailing list
Home: http://mailman.qth.net
Hi Frank, I work PSK-31 most of time from out here in Hawaii on the Big Island.
When calling cq, make certain you include qrp several times in the cq.
Drop a private email to me and lets set up a sked.
KH7S
Russ
__
Elecraft
My K2 is reverting back to QRP since I have the K3. Selling the KPA100 with
all the upgrades for $325 shipped in CONUS. Includes power cable and the
cable for the KIO2. If interested please respond off list.
Thanks,
Russ, N3CO
erusst at att dot net
bad specs.
The KX1 manual talks about the type of phones to look for.
Russ nf7v
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I joined the wrestling team, but it did nothing to advance my radio skills.
You made the right decision for the wrong reason.
--
Sent from my BlackBerry Wireless Handheld
Russ Garrett
Bullivant|Houser|Bailey PC
805 Broadway Street, Suite 400
Vancouver, WA 98660
Well, there is always 20 meters!!! :)
Russ Garrett
Kd7mpk
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy Faber
Sent: Thursday, April 09, 2009 10:19 AM
To: Lyle Johnson; Chris Wagner
Cc: elecraft@mailman.qth.net
.
Thanks
Russ Garrett
Kd7mpk
mail.bullivant.com made the following annotations
-
Please be advised that, unless expressly stated otherwise, any U.S. federal tax
advice contained in this e-mail, including attachments
a telescopic pole made of fiberglass and there are
several on the market. They will need to be supported with guy lines.
I have used a 28 foot vertical. The 32 would be ideal I would guess as
the next smallest is 22 ft.
Thanks again
Russ
Kd7mpk
mail.bullivant.com made the following
I'm moving through the bands just fine until it is supposed to nove to 14 mhz.
Instead it shows as 13? This must be something simple. Did not have this
problem last night.
Thanks
Russ
Kd7mpk
--
Sent from my BlackBerry Wireless Handheld
Russ Garrett
Bullivant
Thanks. I rotated the vfo first thinking that was it. Didn't rotate it far
enough. Now I'm back. Thanks Wayne.
--
Sent from my BlackBerry Wireless Handheld
Russ Garrett
Bullivant|Houser|Bailey PC
805 Broadway Street, Suite 400
Vancouver, WA 98660-3310
Anyone know the size of the dc power connector (male) end that fits into J1? I
need to construct a dc power cable (with a fuse) to connect to a 13.7v battery.
I have searched the manual with no luck.
Any assistance would be appreciate on the parts/construction of that piece.
73
Russ
Kd7mpk
Please post on the list. I'm interested in this as well. Thanks.
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of dbellw...@aol.com
Sent: Tuesday, January 27, 2009 4:42 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] AC supply for KX-1
I apologize. I left off my name and call sign in the heat of the rush.
73
Russ
Kd7mpk
Please post on the list. I'm interested in this as well. Thanks.
-
mail.bullivant.com made the following annotations
to
remember this issue coming up a few months ago but don't know what the
resolution was.
Russ, N3CO
- Original Message -
From: John Buck [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Sunday, November 09, 2008 1:21 PM
Subject: Re: [Elecraft]K3 Open Pot on 52.450 mhz
I confirm
Seems that I only have two tx power options. When PWR is set below13W, I
get ~12 watts. As soon as the PWR knob is set at 13 or above, I get ~150
watts. I've gone through the txgn both lo hi - no ghange.
K3: #869 (kit)
KPA3
KAT3
KXV3 - removed, jumpers reinstalled, per Scott.
--
russ
For all you fellow SMDer wannabees take a look at this site for some SMD
practice
material. http://www.jenrathbun.com/Electronics/Matrix.html
I have no connection to this site, just ran across it in surfing.
Russ, N3CO
___
Elecraft mailing list
I don't work 80 meters very often but I just checked my K2/100 and I have
the very same strong birdie. I never noticed this before and have had the
radio for 4 years. Let us know what you find out.
Russ, N3CO
- Original Message -
From: K2/100 S/N 838 [EMAIL PROTECTED]
To: Elecraft
For sale: K1 ser 2136, with KFL1-4 (40,30,20,15M), 150KHz tuning range, KAT1
tuner, backlight, finger dimple, all manuals.
$450 shipped in the continental US.
Gotta pay for the K3. If interested contact me off list.
Thank you,
Russ, N3CO
Ordered Jan 21, Katiegram June 6, on my porch June 18. Original
estimate when ordered was 5 months which seem optimistic at the time but
I was sure it would be worth the wait. First New rig I have ever owned.
Now to wrap up an estate auction on Saturday and I can dig in.
73
kg7vq, Russ
was able to
shift the board a bit to get the connectors on.
Russ, N3CO
- Original Message -
From: George Sereikas [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Wednesday, May 07, 2008 8:42 AM
Subject: [Elecraft] ANYONE HAVE SECRET TO ALIGNING?CONNECTING K# FRONT
PANELTO MAAIN
Gary;
I too have just been using a cheap computer mic with good results that I
bought for $2. Just follow the directions as described by Brendan and you
should be good to go. However, if you want PTT , you will have to use an
external switch.
73,
Russ N3CO
- Original Message -
From
The myths have been busted 30 years ago. I Recommend reading Walt Maxwell's
Reflections or his series of articles in QST in the early 70's. Or you
can just go to his website w2du.com and read the SWT Mythbuster in action.
Russ, N3CO
- Original Message -
From: Peter Howson [EMAIL
I didn't make the top ten but was #3 SOLP in MI section. Could only operate
about 14 hours-getting too old to stay up all night.
Russ, N3CO
K2/100 #4016
- Original Message -
From: J F [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, April 30, 2007 8:36 AM
Subject
Veeerrry interesting! Mine (#2136) does it also but the room has to be
dark.
Russ, N3CO
- Original Message -
From: Mike Morrow [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, April 08, 2007 12:22 PM
Subject: Re: [Elecraft] K1 Battery Voltage Readout Question - Blinking
to the
snow and ice we have just had here in Western MI.
Russ, N3CO
- Original Message -
From: Tom Hammond [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; John Reiser [EMAIL PROTECTED]; J F
[EMAIL PROTECTED]; Elecraft Discussion List
elecraft@mailman.qth.net
Sent: Thursday, December 07, 2006 2
Fred;
I have been using a Zonet model ZUC3100 for over a year with my K2 and both
a Compaq laptop and desktop with no problems. Used it in the 160M contest
all weekend with N1MM logger. It's only a 1-port but I bought mine from
Newegg.com for $9.99+ph.
Russ, N3CO
K1 2136
K2 4016
on the
market. Why buy a 6N2 at $649, when an FT-817 could be had on the
street for $50-$100 less?
73,
Russ
WB8ZCC
Scott Richardson wrote:
Perhaps a low powered 6m/2m CW/SSB with FM option rig would be a
reasonable project? Something designed as a starting point for the
VHF/UHF weak signal
The DIP version of the SSM2165 is no longer available from ADI.
Russ, N3CO
K2 #4016
- Original Message -
From: Donald K. Duncan [EMAIL PROTECTED]
To: Nicholas Lokuciewski [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Wednesday, January 05, 2005 4:52 PM
Subject: Re: [Elecraft] mic
I never operate 10M but just checked my K2 with the KPA100 and found the
same thing with a strong birdie at around 28262. The weird thing is that
when I turned off the KPA100 (reducing power below 10W) the birdie at 28262
shifted up about 1kc and the birdie at 28019 shifted down about 500c.
Russ
I never operate 10M but just checked my K2 with the KPA100 and found the
same thing with a strong birdie at around 28262. The weird thing is that
when I turned off the KPA100 (reducing power below 10W) the birdie at 28262
shifted up about 1kc and the birdie at 28019 shifted down about 500c.
Russ
97 matches
Mail list logo