-Bridge and
the affiliated pgms
hope it works,
wish I had one of them high dollar gnobs g
GB 73
K5OAI
Sam Morgan
On 3/27/2011 3:06 PM, jpk5...@cox.net wrote:
I've noticed one inconsistency with my P3 so I guess this is a
request for addition to the P3 wishlist. It's a small thing and if it
were
to participate
(and who isn't a full time student,
needing to hone their knowledge base,
for application on future employment issues), hi hi.
I think in Debian speak,
it's called 'having the ability to herd cats'
(sadly I think Linus Torvald already has a project he's working on)
;-)
GB 73
K5OAI
Sam Morgan
/soapbox on
thanks Dave,
the new and improved ARRL site
has made it completely useless to me,
one good reason not to renew!
/soapbox off
GB 73
K5OAI
Sam Morgan
On 2/24/2011 3:21 AM, Dave, G4AON wrote:
I've had a few e-mails asking where on the ARRL web site the P3 review
is... The direct link
/A71 49 10437
WA5DSS TX SO QRP N/A60 50 6500
K5TU TX SO QRP TDXS 32 17 1632
http://txqp.net/download/IndividualScores.pdf
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http
, etc.
Oh and DXLabs also Free, unlike TRX-Manager which I also tried for the demo
period. Had a better K3 interface than DXLabs, but hey maybe thats why they put
buttons and knobs on the face of the K3, hi hi.
GB 73
K5OAI
Sam Morgan
On 2/2/2011 9:53 AM, Jim Sheldon wrote:
Wondering
Nick, I was finally able to get AR in the log,
never heard another the whole contest,
you were 7 Q's before I stopped,
I think all 3 RI stations I heard and tried to work
were both TX and RX into their dummy loads
GB 73
K5OAI
Sam Morgan
On 1/31/2011 12:37 PM, Nick-WA5BDU wrote:
I made about 380 Qs
of programing nightmares I just requested of Alan)
thank you to *ALL* the Elecraft staff for all the Elecraft mojo magic!
GB 73
K5OAI
Sam Morgan
On 1/16/2011 12:24 PM, Amateur Radio Operator N5GE wrote:
Roy,
Did you calibrate the P3?
Tap the P3 MENU Button
Turn the knob until you see Lvl Cal
and the 200hz filter to 250hz
I have forgotten the rational for this,
can someone enlighten me, again. g
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
as
then the diversity reception will work fine?
Does that mean the KRX3 will work the same as if I had all 8 pole filters,
or do I have to sell all my 5 pole filters and then buy all 8 pole filters,
to be able to fully utilize diversity reception with the KRX3?
--
GB 73
K5OAI
Sam Morgan
.
Perhaps they would replace it, I can't really say if it is,
due to a fault with the lettering, or just the way I hit the buttons?
I don't know, just haven't had an opportunity to contact them yet.
GB 73
K5OAI
Sam Morgan
On 1/2/2011 9:18 AM, Brett Howard wrote:
Ken did a great job on my new P3
error?
I can big_grin
GB 73
K5OAI
Sam Morgan
On 1/2/2011 1:54 PM, Sam Morgan wrote:
Does this P3 acrylic plate replace the actual original metal front plate?
or is it an overlay of the original metal one?
This might be just the trick to replace my metal face plate,
Seems my paper thin, short
awesome, 1st op error correction for 2011 went rather painlessly
P3 buttons are so much more of a pleasure to use this way,
definatly end of thread from my end,
need to play with my new buttons, hi hi
GB 73
K5OAI
Sam Morgan
On 1/2/2011 6:32 PM, Sam Morgan wrote:
on off list comment told me
maybe can cobble together something from what is available here:
http://www.mgs4u.com/RF-adapters.htm
GB 73
K5OAI
Sam Morgan
On 1/1/2011 5:09 PM, James C. Hall, MD wrote:
I received the PR-6 6M preamp for Christmas. I have found that it eats up a
lot of shelf space hanging in the back
in there that will help.
if not feel free to use exercise your delete key!
--
GB 73
K5OAI
Sam Morgan
On 12/31/2010 2:36 PM, Don Wilhelm wrote:
Mark,
Please explain what you mean by waterfall display is super messed up - the
K3 defaults to a 400 Hz width for DATA A and that would show a narrow band
to believe your scanner rather than me that is up to you. But please
don't tell me about it, because I already know. See this blog post for more
information.
blog post referred to is here:
http://blog.g4ilo.com/2009/10/lunatics-have-taken-over-asylum.html
GB 73
K5OAI
Sam Morgan
On 12/30/2010 5
be a really simple fix to get the going.
GB 73
K5OAI
Sam Morgan
On 12/21/2010 6:24 PM, Jim Brown wrote:
On 12/21/2010 10:11 AM, George A. Thornton wrote:
Amplified computer speakers have been a problem for me. They are not
well screened for RF and on occasion I have had bad feedback problems
.
P.S.
As I fear your power and your money,
all further correspondence from you to me,
will be posted in full online for my protection.
GB 73
K5OAI
Sam Morgan
On 12/16/2010 8:51 AM, Jack L Stone wrote:
Mr Morgan:
It has come to my attention you have willingly and knowingly spread
://www.antennex.com/Stones/st0509/lb_and_me.htm
all I know is, what was one freely given,
now must be paid for,
but whither or not that was Cebik's wishes for his legacy
well I guess we will each just have to decide for our selves
hint:
who's name is on the check you must write
/soapbox off
GB 73
K5OAI
Sam
check out K3_EZ
http://home.roadrunner.com/~n2bc/SW.htm
then connect and check out the AGC Setup page
GB 73
K5OAI
Sam Morgan
On 12/9/2010 8:49 PM, David Gilbert wrote:
OK, but that still doesn't address decay or slope ... parameters I might
want to quickly change dependent upon the amount
to the trash
just saying
--
GB 73
K5OAI
Sam Morgan
On 12/8/2010 7:16 AM, Pete Smith wrote:
I was one of the early users of the CQ-Contest reflector, back in the
90s, and it was a long time before I became aware that hams were the
only ones who referred to these things as reflectors rather than
are made
are so general as to mean very little
to anyone wishing to try to duplicate those results
GB 73
K5OAI
Sam Morgan
On 12/7/2010 12:30 PM, Fred Jensen wrote:
I run my K3 with AGC on [usually fast for CW, slow for SSB], RF Gain at
max, and I've been very pleased by it's performance. When I
.
http://www.elecraft.com/K3/Lyle%20Johnson%20explains%20Noise%20Reduction.htm
GB 73
K5OAI
Sam Morgan
On 12/7/2010 2:18 PM, k5nu wrote:
Fellow Elecrafters,
Many of you have praised the current version of apf. Since I spend 99%
or more of my time listening for weak signals on 80m, it should
sorry to fast on the trigger
in my pea brain I had transposed the
apf quite uneffective with the NR on
into 'NR was quite ineffective on cw'
my bad
GB 73
K5OAI
Sam Morgan
On 12/7/2010 2:26 PM, Sam Morgan wrote:
I remember seeing it said that, using the NR was useless when you were using
and right outputs
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
ftp://ftp.elecraft.com/P3/firmware/
GB 73
K5OAI
Sam Morgan
On 12/4/2010 6:09 AM, Ken Chandler wrote:
Has version 0041 firmware been withdrawn I cannot find it with the utility
software.
__
Elecraft mailing list
Home: http
http://mailman.qth.net/mailman/listinfo/icom
hint hint
GB 73
K5OAI
Sam Morgan
On 12/3/2010 5:51 AM, John Ragle wrote:
Has anyone experienced the ICOM 9100? I don't seem to find any
real-world specs on this item...
John Ragle -- W1ZI
15 sec on K3 #4123 with Firmware 4.22
GB 73
K5OAI
Sam Morgan
On 11/30/2010 11:13 AM, Geoffrey Downs wrote:
Hello Johnny,
It's 15 seconds on my K3 #266 with firmware 4.22.
73 to all
Geoff
G3UCK
- Original Message -
From: Johnny Siuvr2...@yahoo.com.hk
Subject: [Elecraft] KDVR3
it's already there
hold down the left side of the BAND switch
until you see the VOX indicator go off
sorry just couldn't resist
have a great day
GB 73
K5OAI
Sam Morgan
On 11/22/2010 10:27 AM, Jack Brabham wrote:
I have a highly intelligent VOX system that always does what I want,
when I
) and don't drive a mike well.
I can use an amplified D-104 and have to close talk it (1-2)
and someone can walk into the room 6' away and speak,
and drive the mike harder than I can from 1 or 2 inches.
GB 73
K5OAI
Sam Morgan
On 11/17/2010 1:00 AM, Jim Brown wrote:
On 11/16/2010 10:19 PM, Joe Subich
.
just saying,
that one doesn't seem to hold water for me
GB 73
K5OAI
Sam Morgan
On 11/10/2010 7:04 PM, The Smiths wrote:
The feature described is something that most of us have been waiting for.
Being able to jump around inside a set area and not move the entire display
along with it not only
not.
GB 73
K5OAI
Sam Morgan
On 11/10/2010 7:16 PM, Wayne Burdick wrote:
We will be adding this feature to the P3, but its use will be entirely
optional. It will still behave the same way it does now if you don't turn on
fixed-tune mode.
73, Wayne N6KR
On Nov 10, 2010, at 5:10 PM, Sam
http://cliftonlaboratories.com/using_softrock_as_a_panadapter_for_the_k2.htm
GB 73
K5OAI
Sam Morgan
On 10/24/2010 6:02 AM, jcaruthers wrote:
I am looking for recommendations for adding a panadapter to my K2.
__
Elecraft mailing list
guess I will be brave, step up, assume the dummy position,
and ask the obvious question
what the heck is APF
Animal Protective Foundation
Advanced Protection Formula
American Pain Foundation
pick one:
http://acronyms.thefreedictionary.com/APF
signed
clueless
GB 73
K5OAI
Sam Morgan
On 10
isn't that kind of what the CWT
or any cw decoding software
does when decoding?
GB 73
K5OAI
Sam Morgan
On 10/24/2010 11:04 AM, Bruce Beford wrote:
Audio peak Filter
-Bruce N1RX
__
Elecraft mailing list
Home: http
none of them do
:-(
GB 73
K5OAI
Sam Morgan
On 10/19/2010 6:26 AM, Johnny Siu wrote:
Hello Ian,
I am very sure that Elecraft is clever in choosing both packing and
construction
materials for their radio gears
For example, the screws of K3 rust so easily that they now give you the option
makes sense to me
maybe 1-3% of your targeted market
lives in an environment that is so wet
lets add $20.00 to the price of our produce
for the other 97% of buyers..
that's the kind of marketing savvy that could bankrupted a company
GB 73
K5OAI
Sam Morgan
On 10/19/2010 7:08 AM, James
if the operator fails to follow Elecraft's instructions to
'TURN OFF THE P3 FIRST'
why is it Elecraft's fault the updating fails?
just wondering.
GB 73
K5OAI
Sam Morgan
On 10/18/2010 7:28 AM, KM4VX wrote:
Is there a real fix in the works for the problems associated with updating K3
On 10/12/2010 8:10 PM, Bill W4ZV wrote:
be sure to download the latest K3 Utility (at least
1.3.10.11 or later)
If it has been released I can't find it on the ftp site?
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http
as a courtesy tone, I'm told), every time I key the mic.
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I see in the manual, under CONFIG TUNE
it says:
Note1: TUN PWR does not pertain to ATU TUNE , which always uses 5
or 10 W and is internally controlled.
what determines if 5 or 10 watts is being used?
--
GB 73
K5OAI
Sam Morgan
in how high the volume needs to be
maybe not so much in the louder or not part
but in the just HOW much louder it needs to be
to maintain the level of volume heard prior to turning DR on
just to muddy the waters a bit, lol
GB 73
K5OAI
Sam Morgan
On 10/4/2010 7:01 PM, JAMES ROGERS wrote
exactly how do you:
Set the 250 to switch in at dsp=400, and set the 1.8 to switch in
at dsp=2.1
GB 73
K5OAI
Sam Morgan
On 10/3/2010 7:14 PM, Dave Hachadorian wrote:
I see that there is a 1.8 KHZ 8 pole
ssb filter and a 250 HZ 8 pole cw filter that is avaiable. If
one purchases one
no problems with my http://www.jetstream-usa.com/jtps35bcm.shtml
GB 73
K5OAI
Sam Morgan
On 9/29/2010 5:25 PM, stan levandowski wrote:
Can I get some recommendations for a quality power supply for my K2?
I see where the Astron RS-20M gets good reviews on eHam. I prefer
meters and the 16
Will the K3's internal keyer do consecutive serial numbers
for contests requiring that?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
as this thread has expanded to include RTTY sites in general,
here are a couple of other links that may be helpful:
http://www.aa5au.com/gettingstarted/GettingStartedOnRtty.html
http://www.rtty.com/
GB 73
K5OAI
Sam Morgan
On 9/21/2010 10:54 AM, w...@w5ov.com wrote:
Bill,
I would suggest
screen freeze after transmit.
After the upgrade to 0.36 I no longer have the problem.
GB 73
K5OAI
Sam Morgan
On 9/20/2010 8:44 AM, Craig D. Smith wrote:
I'm considering installing the 0.36 P3 firmware, but am not in the habit of
using beta versions of the K3 firmware, which is required for total
' and that didn't seem to do it??
maybe I did the reset wrong?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
to have all this info posted here, and then perhaps
someone(s)
could get it up on a web site, that wouldn't disappear shortly afterwards.
--
GB 73
K5OAI
Sam Morgan
On 9/18/2010 4:21 PM, Hank Garretson wrote:
On Sat, Sep 18, 2010 at 2:18 PM, ussv dharmaussvdha...@yahoo.com wrote:
Perhaps, since
I just received and installed my KFL3A-6k
I couldn't find any offset tag on the filter?
Does this mean it is missing, or the 6k filter has no offset?
TIA
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
of aluminum 807 cans at a time, right? hi hi
Off topic:
I only use DXLab for my VE7CC DX Cluster connection,
I have never been able to stay connected using HRD,
nor been able to keep the spots when I was dropped and reconnected.
--
GB 73
K5OAI
Sam Morgan
and service.
If they can devise products I can build and it work
1st time it has power, 'these guys are good' g
now back to the manual to learn how to work all it's tricks.
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http
On 9/4/2010 10:08 PM, Kevin Rock wrote:
Sunday 2200z (Sunday 3 PM PDT) 14050 kHz
Monday z (Sunday 5 PM PDT) 7045 kHz
wall to wall TQP here in TX
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net
a signal, dropping 4 S
units.
The only other thing I've done is to align the Reference Oscillator with WWV
after connecting a P3.
Your input will be appreciated.
page 46 owners manual
Filter Loss Compensation
--
GB 73
K5OAI
Sam Morgan
this email list: http://www.qsl.net/donate.html
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
automatically switches to the RX (only) antenna?
or do I maybe have to have the KRX3 second receiver installed
to have what I am wanting to do above?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
-assembly, re-assembly etc so the repair
techs can focus on what they do best. If all goes well, we should be at
the two week or better target in the next 1-2 weeks.
73, Eric WA6HHQ
--
GB 73
K5OAI
Sam Morgan
__
Elecraft
snip
sorry I hit the send button to soon
that 'edit as new' feature bit me again
again my apologizes to the list
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
whatever it is.
/me takes that beer and has a seat to watch the resulting show.
On 7/2/2010 9:56 PM, w0...@aol.com wrote:
Come on guys, give it a rest ... enjoy your toy, play with it, have a beer.
And have a splendid 4th.
--
GB 73
K5OAI
Sam Morgan
the proper hardware, lock washers and nuts. Job done.
73,
Don W3FPR
I can vouch for this method,
I used it to change from the tall bail to the short one
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net
it.
Perhaps losses and the capacitance of the coax run made the match?
MFJ 259B showed it as SWR= 1.2 R=38 X=0
Anyway made 2 contacts with Washinton state stations,
I think I can feel the tug from that 6m bugitus hook being set...
--
GB 73
K5OAI
Sam Morgan
Will the K3 transmit out of the ham bands?
If so how is that implemented?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
On 6/18/2010 7:39 AM, Sam Morgan wrote:
Will the K3 transmit out of the ham bands?
If so how is that implemented?
never mind, just found it:
http://www.elecraft.com/K3/K3FAQ.htm#MARS
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
On 6/18/2010 8:04 AM, Val wrote:
I'm dying to see it.
that would be:
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
for
hearing through the noise on 160m.
Maybe I am missing how I should be setting those 2 variables?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
.
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
of frustration,
just leave it at that setting and go on,
until the next time,
repeat often as required
resulting observation:
the K3 just sounds good,
no matter what I do to mess it up
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home
/ SPL 112dB
Sony MDR V6 ~$70
63 ohm / 10' coiled cable/ 3.5 jack/ ?mw/ Sensitivity: 106dB/mW
Sennheiser MX 880 ~$69 (ear buds)
16 ohm / 3.9' straight cable/ 3.5 jack angled/ /3.2 oz/ SPL 120db
I left the Bose QC-2 headphones off the list as $350+ is just to pricey for me
--
GB 73
K5OAI
Sam Morgan
would recommended for cw and taking
advantage of the K3's stereo capabilities?
I guess if I have to have a mike included I'll just have to deal with it. ;-/
TIA
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http
the
shack to give some Murphy related gremlin into the mix for a free ride??
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
://tinyurl.com/345rqym
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
the things you are asking RC
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
for great products and service.
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
and
when they were still listening in LSB,
they still heard the hum on my cw signal.
IF they switch to cw on their rigs,
they do NOT hear any hum on my cw signals.
what in the world is going on here?
do I have a problem or not?
--
GB 73
K5OAI
Sam Morgan
, I don't think switching supplies create the kind of fields we are
talking
about in other posts?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
suggestions on and off list.
--
GB 73
K5OAI
Sam Morgan
On 5/16/2010 3:03 PM, Tom W8JI wrote:
It is common for me to hear hum or buzz on local receivers very near a
transmitter. Even on perfectly clean transmitters unless I use a line
tap to sample signal all sorts of stuff mixes in. I've never
through how to set up either (or both) pgms
so i can do this?
TIA
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
. station very well, but alas the few times I heard net control well enough
to be sure I wouldn't be answering on top of someones reports, my signals were
lost in the crowd.
K3 #4123 from the rf black hole in central west Texas
--
GB 73
K5OAI
Sam Morgan
with K7SJ?
Dipole @ 24' broadside EW on apartment building, was driving an AL-811, so
maybe
~400w
don't think I did
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
head and prayed (not and easy task)
considered sacrificing virgins, but none were to be found :-(
help, please!
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
forgot to say I AM using serial cable, no USB involved here.
On Sun, May 9, 2010 at 2:41 PM, Sam Morgan k5oai@gmail.com wrote:
I just tried upgrading to the new beta firmware
from the last beta firmware...
snip
GB 73
K5OAI
Sam Morgan
having any problems
DXLab HRD K3_Memory PowerSDR-IF .
none of them have had any problems with data between the computer and the K3
Thanks for the help pointing me in the right direction.
I'll be buying another serial cable also, just in case!
--
GB 73
K5OAI
Sam Morgan
: 1.3.4.26 is the latest ???
but .3 is newer than .26 isn't it?
now I'm confused again
73, Mike NF4L
Sam Morgan wrote:
On 5/9/2010 3:28 PM, Don Wilhelm wrote:
Sam,
It is normal for the K3 display to go blank following each piece of a
firmware load (the red TX light blinks once too). It should
it is
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
On 5/9/2010 5:15 PM, Bill W4ZV wrote:
Sam Morgan-3 wrote:
the web page says: 1.3.4.26 is the latest ???
but .3 is newer than .26 isn't it?
now I'm confused again
1.3.4.26 = April 26
1.3.4.3 = April 3
ah slowly dawns the light
--
GB 73
K5OAI
Sam Morgan
368,791 hmcu0391.hex
09/03/2009 12:48 PM 4,266 tboot8.hex
9 File(s) 2,315,387 bytes
2 Dir(s) 26,581,254,144 bytes free
so..
what do I have wrong,
that is keeping me from upgrading using the Elecraft K3 Utility??
--
GB 73
K5OAI
Sam Morgan
Just like I figured it had to be operator error.
now I know I have to do it differently if I am trying to use beta software,
thanks Dick!
On 4/24/2010 6:15 PM, Sam Morgan wrote:
I ask this question b4 about this error,
but didn't get or understand any replies I received.
So Last time I needed
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
wighted CNC
machined knobs for Elecraft K2 and K3s. They are a bit pricey but very high
quality.
www.73cnc.com
Standard disclaimer: I have nothing to do with this company I'm just a
satisfied customer.
--
GB 73
K5OAI
Sam Morgan
hazarding a guess here Don
generally in mechanical drawings
when looking straight on at something,
it is drawn as solid lines
when it is seen 'through' an item,
it is drawn as dotted lines,
representing hidden or invisible lines
so I'd say the view was from the bottom
--
GB 73
K5OAI
Sam Morgan
With each new release
are we suppose to
first remove the old one (using control panel)
and then install the new version?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
all ears, if and only if, you give a detailed explanation.
/me steps down from soapbox and takes a deep breath and leaves the keyboard for
the fridge and a well deserved beer.
/poof
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
of the error codes for K3 Utility somewhere?
I tried the archives and the help file, but I may not have used the proper
search phrase/term(s)
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
and DXLabs, but prefer using HRD.
I use PowerSDR/IF for the panadapter display.
I have heard of some virtual serial ports or bridges,
but am clueless as to what, which, or how to involve it/them.
TIA
--
GB 73
K5OAI
Sam Morgan
For got to include, the K3 is a bare bones QRP model with NO KXV3A or KAT3
Sam Morgan wrote:
I want to use both my K3 and my K2
at the same time, on the same frequency and antenna.
I wish to TX and RX on the K3.
I also wish to use my K2,
which has a softrock being use with PowerSDR
with panadapter display working.
Now I have broke the bank and bought a K3/10
and some how want the best of both worldsm
until (6-12mo from now) when
I can out fit the K3 for it's own panadapter display.
hope I am making sense, it's confusing to me as well :-(
--
GB 73
K5OAI
Sam Morgan
I would like to buy a Softrock Lite II with the 8192 KHz center frequency for
use with my K3 so I could create a Pan adapter using PowerSDR/IF.
Tony is currently swamped with orders for his other SDR rigs and is unable to
fill my order for one of the above units.
--
GB 73
K5OAI
Sam Morgan
Item(s) found thanks for the bandwidth
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
.
Thanks Elecraft guys and gals for an awesome piece of equipment.
Last time I was this blown away. was my 1st Drake TR-7. ;-)
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
while building?
--
GB 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
201 - 300 of 378 matches
Mail list logo