Item(s) found thanks for the bandwidth
--
GB & 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I would like to buy a Softrock Lite II with the 8192 KHz center frequency for
use with my K3 so I could create a Pan adapter using PowerSDR/IF.
Tony is currently swamped with orders for his other SDR rigs and is unable to
fill my order for one of the above units.
--
GB & 73
K5OAI
Sam Mo
e sunspots.
Thanks Elecraft guys and gals for an awesome piece of equipment.
Last time I was this blown away. was my 1st Drake TR-7. ;-)
--
GB & 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
while building?
--
GB & 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
am able to afford the XG2,
just to be able to finish the build and put it on the air?
--
GB & 73
K5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
:230439252641
http://tinyurl.com/y8g4pgv
check the facts as stated here on Elecraft's site:
"The KDSP2 and the KAF2 (below) use the same connector and can not be installed
at the same time."
http://www.elecraft.com/k2_page.htm#K2%20Options
--
GB &
I just saw a K2 listed for sale , it says with both the KDSP2 and the KAF2
installed. I thought you could only install one or the other, was I mistaken,
can you have both installed and working in a K2?
--
GB & 73
K5OAI
Sam Mo
themselves out in the future, I
hope.
Thanks again for the K2 reply, now I can unsubscribe again. Can't cope with the,
'All K3 All the Time' aspect of the list. Shrug, yea you're right, I'm just
jealous cause I can't afford one, oh well, maybe the
x27;s so tight that is no even
possible.
Is there an adjustment for this, a reason it may have happened? I fear
something
is in the process of breaking?
--
GB & 73
KA5OAI
Sam Morgan
__
Elecraft mailing list
Home: http://mailma
s,
but he changed the # of which rig he was operating from,
there was a big heterodyne on freq from a signal about 2 kc away
so any copy was poor since my K2 has no notch filter.
I tried asking for a relay a couple of times, but no response.
--
GB & 73
KA5OAI
Sam Morgan
___
the
night cools down it stops. Moving is not an option.
P.P.S. Yes I have tried locating it, off the ends, with a rotateable dipole, no
joy.
P.P.S.S. Yes I have used an MFJ-1026 phasing unit, again no joy.
--
GB & 73
KA5OAI
Sam Morgan
for others that may have been as confused as I was,
here are some additional links:
http://www.eham.net/reviews/detail/7169
http://www.n3znkeys.com/
just a confused link follower
--
GB & 73
KA5OAI
Sam Morgan
Jim Miller wrote:
> Just posted a review on eham of my new ZN-QRP paddle.
>
a muting capability in the K2?
TIA
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
ll find an image of the "Softrock IF Stage" tab:
http://www.wu2x.com/images/setup2.jpg
http://www.wu2x.com/sdr.html
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailm
en use the sucker again, and it will remove it all, resulting in a clean hole.
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Is there a mod for an external keying line from a stock K2 QRP 10 w version?
I found a number of links but they refered to moding a K2 for the KPA100 in an
external box. I want to add a keying line for a different amp other than the
KPA100.
--
GB & 73
KA5OAI
Sam Morgan
Linux, the life
ery well on 90% of my local noises
I hear a 4 asking how many checkins .
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the li
and even tried the TS-450
so much for that...
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Chan
ange over.
>
I tend to accomplish this by setting the delay such that, the spaces between
letters do not release the relay, but spacing between words does. I actually
use
it as a method that helps me keep my spacings at the same for letters and words
through out the QSO.
ymmv
--
GB & 73
K
eds just fine.
--
GB & 73
KA5OAI
Sam Morgan
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
y have not been done, yet, and may not be done at all,
but perhaps that's a subject for another post.
Sam Morgan wrote:
> My next project is to install the 14 crystals in the K2KSB2XTLS package
> ==
> K2KSB2XTLS
> Matched Filter Crystals (1
t the iron hot?
TIA
--
GB & 73
KA5OAI
Sam Morgan
http://linuxbasics.org
Linux, the lifetime learning experience.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, s
l with building the actual product,
get ur heads on straight there dudes...
Musta been the blue pill, this damn red one isn't working...
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mu
JT Croteau wrote:
On 9/27/07, Sam Morgan <[EMAIL PROTECTED]> wrote:
Anyone have a K102 they would like to sell?
You must be referring to a KIO2. IO as in Input/Output. No such
beast as a K102.
Yep, suspicions confirmed,
I'll also be needing a new pair of glasses to go with th
Anyone have a K102 they would like to sell?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailma
sn't have to!
or not (shrug)
We thank you for your attention and
now return control of your email program
to it's regularly scheduled spam content.
Have a good day and remember to smile
it makes them wonder
just wtf you're up to
--
GB & 73's
KA5OAI
Sam Morga
Kenneth E. Harker wrote:
The city of Austin also runs its own municipal electric utility.
Insert the zip and you can see rates for all over texas:
http://www.powertochoose.org/
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing lis
/saleslcr.html
try it you'll like it
usual disclaimer
just a very satisfied customer
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
.\
anyone need a mod kit contact me off list.
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailma
an be done manually if u wish.
http://free.grisoft.com/doc/download-free-anti-virus/us/frt/0
http://free.grisoft.com/doc/download-free-anti-spyware/us/frt/0
http://free.grisoft.com/doc/download-free-anti-rootkit/us/frt/0
--
GB & 73's
KA5
ownload-free-anti-spyware/us/frt/0
http://free.grisoft.com/doc/download-free-anti-rootkit/us/frt/0
ymmv
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
-com.com/item.aspx?id=5552
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
ith a less than active funny bone...
my above comment(s)
were intended as a joke, ok?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
that was installed whenever #2481 was
built?
Also I remember seeing a web page with some comments on a *better way* to ground
the xtals. Can anyone point me to it?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to:
a month
B4
they are allowed to place their order!
that's more like it!
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. C
ind a link to the most recent archives:
http://www.ac6rm.net/mailarchive/html/elecraft-list/
I got 23 hits for "soldering station"
and another 8 hits for "soldering stations"
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecr
current indicator, when it's showing 9.6w.
it should be set to run about 2.4w (or less) on psk31?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
S
low them off and they don't get my contact for points?
You better believe it.
Just another view of how the fast ones often fail to serve themselves well by
going so bloody fast. More power to them that they are capable of doing so. I
just wonder how m
ill us in, what were they?
;-/
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/
Wayne and the crew,
After reading your reply on something as basic as the buttons,
I have one two part question:
Is there anything ya'll didn't think of, or wish you had thought of?
;-)
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft m
Michael B wrote:
But in two years there might be something new!
Elecraft is a growing company
But they have outgrown their earlier "one list to serve them all" model.
Elecraft does great radios,
but IMO the current "all K3 all the time" list sucks!
--
GB &
Sam Morgan wrote:
I'm still getting to know my new/used K2 #2481
the voltage reading when I hit display twice says 12.1 volts.
when I check my external battery voltage
(with a Sencore digital meter) I get 12.76 volts
Where in the manual is there a pointer to an adjustment for the int
never going to end,
well at least not for the next 2 years.
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub et
there one?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecr
73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
that last piece of info to/from the other party
so you kick in the 200w's for that short term need.
lots of difference between
5w to 200w = 18+db
as compared to
100w to 1000w = 9+db
hope I did the math correctly ;-/
--
GB & 73's
KA5OAI
Sam Morgan
__
Fred Jensen wrote:
If anyone would like to refresh my memory on Ultimatic keyers, I'd be
happy to read it.
http://www.ac6rm.net/mailarchive/html/elecraft-list/2005-02/msg00563.html
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailin
to take it
off list, were able to read the manuals and assemble their other Elecraft rigs.
/me dons flame suit and limbers up my delete key for any off list replys!
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mail
hard keying"?
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mai
Sam Morgan wrote:
seems I have been corrected,
friction contact is better than soldered connections
guess my Navy electronics teacher with his 20+ years of experience was a liar,
but I'll let ya'll tell him that, I wouldn't dare,
I value my life more than that.
--
G
...
since when is a compression styled contact point
*electrically*
superior to a soldered one?
at any frequency?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
st to it's normal channel...
we hope!
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mail
JL3 so his band conditions I'm sure aren't the same as here in
Texas.
But for his usage he says the USB to LSB change allows him to "listen to phone
QSO's on high-bands to know how propagations are good or not. And he can be
active on his favorite 12-meter."
--
GB
popped up from the quiet and it was a pleasure to hear.
Any suggestions why I'm hearing so many highs? And how I might could shift
things around to change it when I get the manuals.
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft maili
Sam Morgan wrote:
snip
SO what's the deal here, do I ignore the DAC readings?
Bandwidths used are 1400, 800, 400, 100.
Center freq DAO CW Normal DAO
142 157
135
Sam Morgan wrote:
Morning all,
I have a new (to me) K2 #2481 it has the KSB2 and KAF2 .
When I check the software version it reads "2.01 H 1.02" first
question is:
does that mean that I am running version 2.01 or 1.02 software?
I don't yet have the dead tree version of the
154
130 152
128 151
Ah the joys of a rig you can actually work on, heheheh.
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing
nable PSK-31 with a K2?
you might like this approach
http://www.qsl.net/w3fpr/switchbox.htm
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Inf
k. Is something loose
inside that I should be concerned with? I peeked inside, and if I don't have to
dig my way down into behind the front panel, I'd really like to put it off into
the far distant future. ;-/
TIA
--
GB & 73's
KA5OAI
Sam Morgan
thing ever again,
until it was ready to go up for sale!
Thank goodness they are much better mannered than I am. ;-)
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to po
Its
their Catalog Number TW-31-9874 and sells for $59.99.
which happens to be on sale now for ~$33.00 after shipping ~$45.00
looks like the one I paid about $80.00 for back in 1995.
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Pos
Sam Morgan wrote:
Jack Regan wrote:
The first net will be tonight, Sunday, Jan 28th, at 8:00 pm on 7.055
MHz.
guess I should have first ask 8:00 pm where, what time zone?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to:
e have any suggestions on how all these ops could be (re) scheduled
so as to allow someone to participate in all of them?
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to t
handy companion to propfire which displays propagation data.
http://www.n0hr.com/Propfire.htm
There is also a search engine for QRZ.com which comes in pretty handy.
http://mycroft.mozdev.org/download.html?name=qrz
--
GB & 73's
KA5OAI
Sam Morgan
__
ch area is close to a corner of the 14x11 foot room.
Works for me, and believe me, when I get a whiff of any solder fumes it's real
close to a go to the hospital experience! so I can totally relate to your
panicky feelings.
--
GB & 73's
K
can find, I have hesitated. I would like to
hear any 'specific' models/manufactures pros and cons for 19" LCD's other use.
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mu
Don Wilhelm wrote:
You can download the last freeware version of Spectrogram
from Tom Hammond's website *www.n0ss.com*
corrected link
http://www.n0ss.net
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailm
nt/cgi-bin/framed.pl?Document=/Measurement/tutorials/index_scopes.html%3Fwt%3D465%26link%3D/Measurement/tutorials/index_scopes.html&FrameSet=elearning
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
works better than RS's spring loaded
pencil type device, which I have also used.
has anyone figured out some kind of, switchable, motorized replacement for the
rubber bulb? Something like, somehow using an aquarium pump in reverse?
--
GB & 73's
KA5
or the seal,
easily removable, (the landlord allowed a 2nd antenna later). Guess it was like
chicken soup, made me feel better. :-)
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
those problems would have been potentially
terminal for the life of the unit, if I had applied power to them before
inspecting them.
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscr
s I able
to get any other of about 10 pgms I wanted to use to run or find a
*satisfactory* equivalent in linux. So I ended back on the dark side with xp for
my ham needs.
Bottom line, what ever OS fits you needs is the one to run. Sad but true.
--
GB & 73's
KA5OAI
Sam
r end of 40m, should the need arise.
I wonder why I have never seen any mods where a vernier dial has been added to
the K1 unit? Reasons...???
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mu
te
probe for this o-scope?
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.ne
ey
accept very different tradeoffs.
You said a mouthful there Jim
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, u
meter on SSB
and do the long 'hello' thing,
which setting gives you the more accurate
(in relation to setting the output to say 10w) reading for a contest?
TIA
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to:
Sam Morgan wrote:
Another (free) hf propagation software I like to use is hfprop by G4ILO
go to: http://www.g4ilo.com/
snip
I have been corrected.
HFProp is not freeware, but in the current version there are no restrictions on
its free of charge use. However, the software will display
p://www.g4ilo.com/aboutme.html :-)
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.n
://addons.mozilla.org/firefox/1253/
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
ering to banana plugs is not
an issue. Having the BNC connector and banana plugs in series has not
caused any problems, even at millivolt levels. I don't know who made it
unfortunately.
googled for 'bnc to banana plug adaptor' and got lots of hits.
thanks for the idea Geoff.
--
Sam Morgan wrote:
K. Rice wrote:
Here are some URLS for the K1 sideband mod.
snip
Giuliano's K1 web page:
snip
Sorry, this site is temporarily unavailable!
Here is a working url for the K1 mods that I found in the
K1_Mod_SSB_Reception.txt, seems they are in .doc form
I wonder if
open back up in an hour, it's 14:17utc here now
--
GB & 73's
KA5OAI
Sam Morgan
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
htt
d I
would install one as soon as it arrived. I wonder does anyone make
something like that?
I just received a reply from tech support at oselectronics
the VD61 is a continuous 360 degree turns 6 to 1 vernier.
--
GB de ka5oai,
Sam Morgan
--
linux - the lifetime learning
ke it just a bit easier.
has anyone tried one of these on the K1 to help with the tuning rate?
http://www.oselectronics.com/ose_p101.htm
--
GB de ka5oai,
Sam Morgan
--
linux - the lifetime learning experience
___
Elecraft mailing list
Post to
any other K1's listed for sale on
the list. (granted I've only been on the list for about a month) Am I being
mislead on the resalability of the K1?
Comments please.
--
GB de ka5oai,
Sam Morgan
--
linux - the lifetime learning experience
301 - 385 of 385 matches
Mail list logo