to force the problem.
Not Elecraft's problem I'm sure, but I am curious as to whether anyone else
has noticed this issue before I venture onto the HRD forum, where they can
be a little over-defensive at times :-)
73, Stephen G4SJP
K3 #980 and P3, latest firmwares. I'm fairly sure this happened
!
73 Stephen G4SJP
On 07/05/2011 16:12, JAMES ROGERS w4...@bellsouth.net wrote:
Absolutely. I had this problem as well with HRD. I was never able to
resolve the issue. Since moving away from HRD to al Mac based software I
have not seen the problem again. I, for one, do not think
a good look at DXLab
and look again at MacLogger and Rumlog for the mac.
73, Stephen
On 07/05/2011 21:09, Gary Gregory garyvk...@gmail.com wrote:
Joe,
I too use DX Labs suite and the issue has never returned.
73's
Gary
On 8 May 2011 04:00, Guy Olinger K2AV olin...@bellsouth.net wrote:
Can
Hi
My K2/100 has been functioning well, and I am now trying for the first time to
use the connection on the 100W amplifier unit for CAT control with Ham Radio
Deluxe. The K2 is serial number 6679, so apparently no modifications are
needed. The side-tone works. I fashioned the cable as per
...@cox.net
To: Stephen Victor victo...@yahoo.com
Sent: Mon, April 18, 2011 12:47:56 PM
Subject: Re: [Elecraft] K2: CAT control of K2/100 with HRD
Hi Steve:
I think you have the baud rate wrong. The K2 is 4800, (not 48,000) if I
remember
correctly, and HRD must match.
73,
Ken K3IU K2 #5413
On 4
Hi. What carrier power will the KPA500 put out for well modulated AM?
Thanks and 73
Steve WA2DTW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
. I hardly ever use ssb so it's going to take me a while
to track this one down! Running 4.29 firmware, but it's happened over
several versions.
73, Stephen G4SJP
On 06/04/2011 01:08, W4CCS w4...@w4ccs.com wrote:
Recently I have been experiencing a problem with the AGC on my K3
(2090). When I
Make that three :-)
73 Stephen G4SJP
On 27/03/2011 03:23, Don Cunningham d...@martineer.net wrote:
Richard,
To answer your original question (which nearly NEVER happens on this
list),
mine does the same and hasn't blown up. I wouldn't worry about it as we
know two do it.
73,
Don, WB5HAK
I would second this request.
73 Stephen G4SJP
On 13/03/2011 21:56, Greg n...@cableone.net wrote:
Hi All - Perhaps this was mentioned before and I missed it.but I would
like
to see a marker that would act as a marker when using XIT. When a DX
station is working up, for example, I would like
Phil
Pressing (actually holding) CENTER _twice_ will do it.
73,
Stephen G4SJP
On 13/03/2011 17:11, Phil Hystad phys...@mac.com wrote:
After the update that gave us the ability to shift VFO frequency without
the spectrum changing, there are times that I want to recenter the cursor
on the VFO
birthday in May,
and now you've set me wondering what I'll be able to get away with then!
So, to keep this on topic, I'm really looking forward to putting some more
hardware in my P3. Monitor output? Directional coupler port? Coffee
maker? Please?
73 Stephen G4SJP
On 06/03/2011 21:45, stan
of it via this reflector.
Give the dog a pat for me, I'm sure that he/she will soon get the hang of
the paintbrush!
73 Stephen
On 06/03/2011 22:13, stan levandowski sjl...@optonline.net wrote:
Stephen, I spent my career in business and negotiation is how things get
done in business. I began
Are those the brown/yellow coloured ones that taste nice?
I'll get my coat
73 Stephen G4SJP
On 27/02/2011 17:51, Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com
wrote:
I hate the plastic ones, also, even though my local UPS store accepts
them for reuse. But check what you receive, many
wonder if this is a bug which has crept in somewhere? Running 4.25 on the
K3 and 1.04 on the P3. I have done a quick search of the archives but not
seen this mentioned inso far as I can see.
Maybe it's my age :-)
73 Stephen G4SJP
Thanks Joe
I've got my head around it now, thanks for your helpful comments.
73 Stephen
On 16/02/2011 21:46, Joe Subich, W4TV li...@subich.com wrote:
I have just noticed this happens in CW mode too. Go into split and
then try to change mode. The VFOB area warns that split
Ken,
Unfortunately you have inverted the 6's. It's $1,999.
73 Stephen G4SJP
On 13/02/2011 21:46, Ken Chandler g0...@sky.com wrote:
Good pic, I see the kit price is showing (blurred on my iPhone ) but it
kooks like $1,666.
Ken..G0ORH
Sent from my iPhone
Member of:-
RSGB, NADARS, CDXC
simplify matters.
Part of the disparity in prices, it must be said though, is that the
exchange rate with the Euro is not as favourable to us as it is with the
USD. If we still had about €1.50 to £1 it would make all the difference!
73 Stephen G4SJP
On 11/02/2011 19:42, DL2FI, Peter qrpl
Aptos.
I did a similar check some time ago on the K3 and came to much the same
relative difference.
73 Stephen G4SJP
On 10/02/2011 18:04, David Ferrington, M0XDF m0...@alphadene.co.uk
wrote:
Prices at http://www.qrp-shop.de/200/cgi-bin/shop.dll?AnbieterID=1
73 de M0XDF
--
Natural ability
Will the automatic bandswitching function on the KPA500 work with the K2? Or
only with the K3?
Thanks and 73
Steve WA2DTW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Al,
I get the same behaviour, I'd just never noticed it before. I'm running
4.22 on the K3 and 00.49 on the P3.
73 Stephen G4SJP
On 10/01/2011 05:25, Al Lorona alor...@sbcglobal.net wrote:
Why does my P3 do this?:
In LSB mode, whenever I go into TUNE for more than about six or seven
seconds
or do to get the VCO
Test to land within the correct 8 - 10 MHz frequency range. Most
advice I could find via searching previous email discussions was about
the VCO Alignment which is the next stage, but I figure I need to get
over this hurdle before that next one.
73
Stephen VK2RH
Many thanks, gentlemen, for the many words of wisdom.
The topic, so far as I am concerned at least, is now closed!
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
. In the meantime I would be pleased to hear any
comments.
Happy New Year!
73 Stephen, G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
as a Marconi so my
options other than lengthening the antenna are rather limited. I'm not
limited by space so much as by a very convenient distance between two tall
trees!
73 Stephen G4SJP
Let us consider the topic closed!
On 02/01/2011 19:51, Jim Brown j...@audiosystemsgroup.com wrote
occasions the beginning and end of the noise was accompanied by the sound
of a relay operating within the K3. I've not had it now for two or three
weeks.
I run HRD with the K3/P3 as a logging program. This may be significant, I
don't know.
73 Stephen G4SJP
On 31/12/2010 00:41, Phil Hystad phys
or sherry? I assume that you like
mince pies..
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Alan
I know it further complicates things, but what about a iMic USB outboard
soundcard?
73 Stephen G4SJP
On 10/12/2010 02:27, Alan D. Wilcox a...@wilcoxengineering.com wrote:
Hello,
The MacBook Pro has a single 1/8 audio connection for both mic in and
external-speaker output
that did
this, that part of the world anyway.
It might be too much, however, to expect to have to prove past ownership of
the K1 and K2 before being allowed to buy a K3! Many of us would qualify
nevertheless!
73 Stephen G4SJP
On 08/12/2010 17:56, Byron Servies by...@servies.us wrote
Hi Tom
It would be useful to see what the waterfall looks like too as you can spot
the time varying nature of it then. I see some amazing waterfall patterns
from various mystery sources.
73 Stephen G4SJP
On 28/11/2010 04:39, Amateur Radio Operator N5GE n...@n5ge.com wrote:
I don't know
Hi Graham
No, I just paid VAT and Parcelforce's disgraceful release fee. That was
more than enough (but the P3 is great!).
73 Stephen G4SJP
On 19/11/2010 20:20, Graham Kimbell G3TCT g3...@lineone.net wrote:
I bought a P3 kit which arrived in October with a demand for import duty
(as well
The same experience here as James. In my case the K3 was already pretty
accurate. I wouldn't be without the XG2 though, it's good to have a source
of known power.
73 Stephen
On 18/11/2010 18:57, James Sarte (K2QI) k2qi@gmail.com wrote:
I've only used the XG2 to calibrate the K3's S
.
Since it only occurs above a set frequency and then is apparent below that
frequency too, to my mind it has to be a fault with the K3 that I haven't
observed with any previous firmware version. I am running with latest beta
for both the K3 and P3.
73 Stephen G4SJP
I do wish I'd read this last one more carefully before posting, what I had
intended to say was that the noise only disappears (but only in cw/ssb
modes) below FC = 0.81 kHz.
On 17/11/2010 22:28, Stephen Prior s...@sjprior.fsnet.co.uk wrote:
Further to my last posting, I observe now
Further to my last posting, I observe now that the appearance of the 'qrm'
depends upon the filter and shift settings, what is observed to be a problem
in AM mode completely disappears in cw/ssb modes, for example this occurs at
and below FC = 0.81kHz.
Stephen G4SJP
On 17/11/2010 22:05
Ron
Forgive the implication of stupidity :-), but you are connected to the
correct bnc connector on the back of the P3 are you?
Stephen G4SJP
On 09/11/2010 20:40, Ron Hahn (EI2JP) list-elecr...@ei2jp.org wrote:
Greetings Fellow Elecrafters,
With great anticipation I finally got around
Len
I get exactly the same here. Also using 4.18.
73 Stephen G4SJP
On 06/11/2010 11:46, Len, K3LJ lzi...@mindspring.com wrote:
Gentlemen, thanks for adding the APF to the K3 and the quick response to the
bug that some operators were experiencing. The APF works great. I did find
Is the microphone an electret type? If so you would need to turn on the
bias - the manual (not in front of me at the moment) tells you how.
73 Stephen G4SJP
On 06/11/2010 18:03, Brad Pioveson W9FX b...@w9fx.net wrote:
One of the three new K3's we purchased for use at our state RACES
I don't have any lack of ssb power output here after the new download with
APF enabled in config.
IO have to say I think the new APF is very good indeed. Running 4.17 on the
K3 and 00.41 on the P3.
73 Stephen G4SJP
On 04/11/2010 18:56, n...@widomaker.com n...@widomaker.com wrote:
I'm new
button to
change width, just the width control. The effect is the same.
Yes, it's a lovely radio, and I came from a TS480 too, via a K2 that is :-)
73 Stephen G4SJP
On 28/10/2010 11:41, pastor...@verizon.net pastor...@verizon.net wrote:
I purchased a K3 with the standard 2.7 Khz SSB
here, but would like to see that option in the future if possible.
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Great! Thanks Wayne.
73 Stephen G4SJP
On 25/10/2010 19:39, Wayne Burdick n...@elecraft.com wrote:
We might have a field-test revision of K3 code that includes APF
sometime this week.
In this test version, APF is turned on by rotating the WIDTH control
counterclockwise past the 50-Hz
Having become totally frustrated with the N1MM contest logger, I thought
I'd give Writelog a try.
I have just purchased and installed Writelog and I don't have the
foggiest notion as to how to get it going.
My configuration is an Elecraft K2 controlled via COM 1 and the K1EL
WinKey keyer
Was wondering if the KPA500 will be available as a kit (like the K2), or with
prebuilt boards like the K3.
Thanks
73
Steve WA2DTW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
, and I
don't believe I've seen an answer from Elecraft.
Is DRM possible within the SDR of the K3? Or do we have to take the IF
output and down convert? If that's the case, what's the best way to go?
73 Stephen G4SJP
__
Elecraft
Hi Geoff
I've had several replies, all report the XG-2's -73dBm level to be between
about -78dBm and -80dBm on the P3, so it's at least consistent, and will, no
doubt receive Elecraft's attention in due course!
73 Stephen
On 27/09/2010 19:18, Geoffrey Downs geoffre...@madasafish.com wrote
no big deal and I've
found that I don't know how I've survived so long without a panadaptor, it
introduces a whole new way of working.
73 Stephen G4SJP
On 27/09/2010 20:33, Joe Planisky jp...@jeffnet.org wrote:
Which do you suppose is inaccurate: the XG-2 or the P3?
73
--
Joe KB8AP
from typing this, I have only now just found that if I
choose to 'Use factory default RF Gain calibration data' then all is well,
so is this a bug within the latest utility I wonder?
Thanks
73 Stephen G4SJP
__
Elecraft mailing list
of +/-
3dB. A calibration routine for the P3 utility has been mooted for the
future, but I am wondering whether it's normal for the level to be so far
out.
I'd be interested in what other XG-2 and P3 owners find. The XG-2 is
running on a new lithium button cell.
73 Stephen G4SJP
David
I have the same problem here, well found!
Using latest firmware in both K3 and P3.
73 Stephen G4SJP
On 22/09/2010 19:38, David g0aixda...@aol.com wrote:
When using REV button on K3, P3 display frequency marker freezes and does not
track K3 frequency change - anyone else seeing
clearly it cannot be.
I'm doing something wrong somewhere. BTW, I do appreciate that I haven't
paid for a lab grade instrument! I've only my brain to blame!
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Elecraft are clearly getting their backlog sorted well. I ordered a P3 on
August 23rd and just received advice of shipping within the next 7 to 10
days. Now to find room for it.
73 Stephen G4SJP
__
Elecraft mailing list
Home
Hi Ian
That's _so_ useful!
73 Stephen G4SJP
PS See you at the HF Convention in October!
On 30/08/2010 07:43, Ian White GM3SEK gm3...@ifwtech.co.uk wrote:
Ron D'Eau Claire wrote:
It's always a good idea to check the Elecraft web site to see if you
have the latest manual and errata just
previous DSP board too.
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
the P3
itself). It seems that softrocks are not currently available.
I would even consider a SDR-IQ at the right price.
Thanks
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Many thanks to all who have replied, the various offers and the good advice.
I have done a lot of thinking and soul searching and I have decided that
since I would probably end up with a P3 someday anyway, I might just as well
go for it now!
Off to the order page!
Thanks again!
73 Stephen
I use the Heil MD2 microphone which has an electret element. I have both
compression and mic gain set to 25, and mic set to front panel low with
bias.
I have far more 'talk power' than I have enjoyed with any previous radio.
73 Stephen G4SJP
On 20/08/2010 04:24, Joseph Trombino, Jr w
Tim and Group:
As a very happy K2 user, I can say that I'd never part with mine.
73,
Steve
AA4AK
Tim wrote:
Hello -
I've been away from radio for about 3 years. Am thinking of building
another K2, but am wondering if the K2 will be discontinued due to the
popularity of the K3. Can
I never had a reply to my original posting from April, so thought I
would fish for advice again.
What has prompted me to repost is a qso just a few minutes ago with a
GW on 20m (I'm in south-west France at the moment) where he gave me
579 (I was running 3W) and I could barely hear him. In
Testing new email address. Sorry!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Many thanks Don, I shall have to wait until my return home for a scope
but I shall certainly have a close visual inspection. I should have
added however, that the radio has both the 30/80 board and the auto
atu - I don't know whether that will change your diagnosis.
73 Stephen
On Thursday, July
to look were it not for your suggestions!
73 Stephen
On Thursday, July 15, 2010, Don Wilhelm w3...@embarqmail.com wrote:
Stephen,
Since the KXB3080 is already installed, check the number of turns carefully
on L1, L2 and T2 to make certain you do not have an extra turn.
T2 has 33 turns
impression from reading
this list about what has changed. The audio is certainly fuller and easier
on the ear.
73 Stephen G4SJP
K3 #980
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
This is part of the reason why I have ditched HRD and gone back to Maclogger
on the Mac. It seems to me that HRD has become too bloated and, for the
moment at least, inadequately supported.
73 Stephen G4SJP
On 03/06/2010 22:18, David Herring, K6DCH da...@k6dch.com wrote:
I have the exact
was negligible. I have spent a lot of time on
this, even mounting the fan panel on rubber bushes - all to no avail.
I wonder if I can find a source of the Elina fans in Eu?
73 Stephen G4SJP
On 28/05/2010 09:51, Julian, G4ILO julian.g4...@gmail.com wrote:
Joe Planisky wrote:
From
tactile feedback - it needs a click or similar. A shame, since the
quality of the audio is very good, although my voice prefers the MD2.
73 Stephen G4SJP
On 27/05/2010 03:08, Jeff Cochrane - VK4BOF vk4bof.elecr...@gmail.com
wrote:
G'day everyone!
First of all,
After having given my K3 its
that I want to do all 3 installations in one go
Mni Tnx
73
de zl1any
--
Stephen Pearce
Critical Care
Whangarei
ph 021 390 997
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
are
well respected.
73 Stephen
On 22/05/2010 16:21, Hector Padron ad4c2...@yahoo.com wrote:
Yes you are absolutely right,all companies should use the same circuit design
or even improve it further more but its hard to believe that a company that
has been sleeping in the darkness
for courses
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
and transmitter gain.
It's not a show stopper, but strange to say the least!
Stephen G4SJP
K3#980
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
and reached the same conclusion.
I'd be grateful for any pointers.
Tnx and 73
Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Got TX3A QSLs via LoTW
73,
Steve
AA4AK
Paul VanOveren wrote:
BlankSorry for the OT bandwidth, but curious if anyone has received their
cards for the TX3A dxpedition??
73,
NF8J
Paul VanOveren
5911 Snow Ave.
Alto, Mi
616-868-7149
A ground bus from The Wireman greatly simplifies the process.
73,
Steve Kercel
AA4AK
Charles Teeter wrote:
Hello:
After I get my kit built, I¹ll be operating with a windom antenna on 40
10. It¹s been suggested that when I¹m not operating, I should disconnect
the rig from the antenna
were really appreciated by this buyer on
the other side of the world.
I love the way quality products - the Elecraft line - can generate markets
for other quality products like this.
73,
Stephen VK2RH
On 4 March 2010 09:21, Ken Kopp k...@rfwave.net wrote:
A photo showing two of the new DXpedition
AA4AK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Allan:
Use DeOxit spray. Available at Radio Shack.
73,
Steve Kercel
AA4AK
Allan Taylor wrote:
I am about to purchase a very early K2 for use almost entirely in the
field. The potential seller mentioned
that his K2 has a scratchy audio pot but also said that the cure was
well known. I
.
73 Stephen G4SJP
K3 #980
On 28/12/2009 02:19, James Sarte k2qi@gmail.com wrote:
Hello Elecrafters,
When I assembled my K3 I installed the KBPF3 module in the sub receiver
figuring that I'd use the sub for SWL. However, I was thinking about moving
it back to the main receiver in order
the
front panel socket. I have done all modifications as they have been
announced, but I still have this problem.
In reality of course it's only a minor inconvenience as I can use the front
panel socket but nevertheless the issue still exists.
73 Stephen G4SJP
K3 #980
Many thanks Joe, especially for the W1HIS link, that makes very interesting
reading.
73 Stephen G4SJP
On 08/11/2009 17:55, Joe Subich, W4TV li...@subich.com wrote:
www.yccc.org/Articles/W1HIS/CommonModeChokesW1HIS2006Apr06.pdf
Much the same experience here. As much as I loved the K2 it hardly got
used. Tough decision but I sold it and it's enjoying a new life in VK land
(I'm rather envious in fact!).
73 Stephen G4SJP
K3, KX-1
On 04/11/2009 22:27, NZ0T n...@cox.net wrote:
I built a K2/100 with every option except
in some
manner. I have the Yaesu tune control from The Better RF Company which
allows the AH-4 to work with the FT-857/897 radios but have never looked
into whether it could be adapted for use with the K3.
Too many things to do, too little time
73 Stephen G4SJP
On 29/10/2009 08:41, Glen
Roy
Why don't you just move the macro down to one of the additional macros on
the bottom half of the utility window. These are the ones which can be
executed from the utility but not from the K3 itself, if that makes sense.
73 Stephen G4SJP
Roy Morris-6 wrote:
I have assigned a macro
the K2 or K3, but it seems
to me that the KX-1 should be performing better than this. It also seems a
little quiet.
Any suggestions appreciated
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Hi Dick
Maybe they are, but I don't hear anything on the K3 (or even my FT-817) on a
much bigger antenna, and anyway there is not much BC activity I can hear on
7.1MHz these days. I should add that the KX-1 has the 30/40 board and the
internal ATU fitted.
73 Stephen
On 27/10/2009 20:35
Many thanks Don, I have also had some input from Wayne on this one and have
some things to check with the scope. I shall combine your reply with his
and see where it takes me.
Thanks again
73 Stephen
On 27/10/2009 21:57, Don Wilhelm w3...@embarqmail.com wrote:
Stephen,
The first thing
the K2 or K3, but it seems
to me that the KX-1 should be performing better than this.
Any suggestions appreciated
73 Stephen G4SJP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
on the latest beta firmware.
73 Stephen
G4SJP K3#980.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
which apparently allows the setting of bandwidths higher than
this on all modes.
Have I got this right?
73 Stephen G4SJP
On 16/10/2009 18:10, Stephen Prior s...@sjprior.fsnet.co.uk wrote:
I have just fitted the FM filter to finish off my complement (now 13, 6,
2.7, 0.5 and 0.25). I used
Thanks Joe,
Your reply arrived as I was typing my reply to my own original posting,
after having found the information in the archive!
Many thanks, it's clear in my mind now.
73 Stephen
On 16/10/2009 22:16, Joe Subich, W4TV li...@subich.com wrote:
The K3 DSP maxes out at 4 KHz on SSB
Ham Radio Deluxe, written by Simon Brown- it's a combined rig control,
logging and data mode program, extremely powerful. I don't use the rig
control part but the other two features are both excellent.
73 Stephen G4SJP
K3 #980
On 10/10/2009 14:29, Mike nf4l_no_s...@nf4l.com wrote:
I should
disappears.
73 Stephen G4SJP
K3 #980
On 09/10/2009 17:09, Wayne Burdick n...@elecraft.com wrote:
Hi Nick,
I still can't duplicate this. Please describe exactly how both the K3
and HRD are set up.
In particular: Do you have a sub receiver, or at least have the aux
DSP module installed? K3
Hello Vic
No, I have not, but I will take a look at it tomorrow. I have never looked
at that HRD option before. Time for bed here!
73 Stephen G4SJP
On 09/10/2009 21:02, Vic K2VCO v...@rakefet.com wrote:
Stephen Prior wrote:
I'm getting a similar thing here. I have no KRX3 and have HRD
Can anyone give me a thumbnail review of how to use N1MM with 2 K3s in
multi/2 (or tell me where to find the info?)
73,
Steve AA4V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
garden's
width between the antennas.
I like the IC7700 a lot, it's VERY pretty and has really rich audio like the
IC781 which it replaced at my friend's qth. However, it's also very big,
heavy and expensive.
Horses for courses
73 Stephen G4SJP
On 06/09/2009 07:45, Dave G4AON elecr
Stephen G4SJP
K3 #980
On 05/09/2009 23:03, p...@n4lcd.com p...@n4lcd.com wrote:
When I try to use a memory record in the K3 while I'm sending using
Farnsworth, the K3 removes the extra space.
Does anyone know how to make the K3 memories use Farnsworth spacing
if I record myself sending
Hi everyone.
I'm out of date with with recent list correspondence, but does anyone happen to
know how or if the P3 device can be used with a K2? The P3-K3 interconnect
photos are certainly appealing, but I'm not a K3 user. I assume that an IF
interconnection would be required for the K2, but
http://www.rigpix.com/tokyohypower/tokyohypower_ht200.htm
The link above is dated September 2006, so it's been around a while. Never
seen or heard one however.
73 Stephen g4sjp
__
Elecraft mailing list
Home: http
Barry,
The power dropped to 110W with the previous public beta I think, in the
interest of spectral purity as I recall.
73 Stephen G4SJP
K3 #980
On 13/08/2009 12:10, Barry Simpson vk...@optusnet.com.au wrote:
I have just loaded the latest firmware.
The NR is certainly different
The failure mode that Ingo describes is not that unusual in a K2. If you
cannot get speaker audio, the phone jack should be one of the first
things to check.
73,
Steve Kercel
AA4AK
Ingo Meyer, DK3RED wrote:
Hello Nick,
Looking for some help please. My K2 has developed some distortion
Hi All:
I'm new to this list. As of last week, my K2 s/n 6770 is up and
running - I'm quite happy with it. Even though I have a stealth sloper
to a pine tree (HOA restriction), the receiver has impressed me, and
the QRP gets out (next weekend's board is the 100W PA). This weekend I
got
I'm new to the list, with a couple of questions on the K2. My s/n 6770
has been running for about a week: this weekend put in the KSSB2,
KDSP2 and KNB2. When I select from the four CW xtal filter bandwidths,
I get a slightly different pitch on the received CW station.
Qusetion 1: Is that
501 - 600 of 1055 matches
Mail list logo
