[Elecraft] Practicing using my new Vizkey 90 deg bug.

, begali Traveler, Vibroplex speed racer, SKCC straight key by LNR, and some others.  Now, I will add a bug to the rotation. I hope that we can work each other on the air sometime.   73,Steve KI4EZL Sent from my Galaxy Tab® S2

Re: [Elecraft] Modifying the K2 for use as an IF radio for the microwave bands

IF this is not a problem for me. (4) Internal 630m transverter (KE6US) - sounds like a great project! For 2200m, maybe not, as one might want better frequency accuracy in such a narrow band than the K2 can provide. 73, Steve VE3SMA __ Elecraft

[Elecraft] Modifying the K2 for use as an IF radio for the microwave bands

;plug-and-play" replacement for one of my aging FT-290Rs. I have just finished writing this project up, as it may be of interest to other microwavers. The description is at http://www.qsl.net/ve3sma/TheK290RProject.pdf . Happy reading! 73, St

Re: [Elecraft] K3: 2 meter SSB/CW Capability Questions

really up to it, though I have managed a few MS QSOs using a K2/XV144/amp combo. 73, Steve VE3SMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] K3 and WSJT-X Split operation.

ted what is causing the low frequency roll off. Steve, K6UM On Tue, Dec 5, 2017 at 6:11 PM, Christopher Hoover <c...@murgatroid.com> wrote: > I second Carl's explanation. > > I run WSJT-X on my K3s in rig split mode exclusively. It works > transparently and flawlessly. > >

Re: [Elecraft] Experience with KX2 indoors

a Chameleon "P Loop" I was underwhelmed with the results. Steve, KC6ZKT, San Jose (CM97) On 11/30/17 8:22 AM, Paulette Quick wrote: > What is the experience of operators with the KX2 indoors.  I am going to > start using a KX2 with a W4OP antenna and I am concerned about

Re: [Elecraft] Digitized IF over IP?

tp://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to j...@jtmiller.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailm

[Elecraft] MIO's

are listening to foreign languages. In his case he was stationed in Alaska, so I'm sure he can "type" the extra characters in the Cyrillic alphabet :-)  Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailma

Re: [Elecraft] Using T1 with KX2 or KX3

Hmmm. That means that it should be trivial to make a DC-blocking circuit that would allow you to pull the ring of J3 to DC (and not RF) ground over the coax to initiate tuning. Then you would have part of the remote control puzzle solved. That's nearly enough to finally get me to buy a T1. On

[Elecraft] RE : K3S RX antenna questions

Questions answered, thank you all! 73 and hope everyone has a GREAT day,Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] K3S RX antenna switching questions

from time to time, which has pin diode T/R switching and, according to reports, does QSK perfectly at those speeds. I don't want to mess that up either. Thanks,Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman

[Elecraft] Perfect code

that makes copy difficult. And it's very common when a guy gets competent at 30/35 wpm and tries to push faster. 73,Steve, WF3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] On CW

used their ladder to get inside and open the door so he could get his belongings. Morals of the story: 1. You never know when knowing Morse Code can really make a difference. 2. Don't ever smoke naked outside Steve Silverman KB3SII

[Elecraft] [K2] Frequency Calibration using WWV Audio Tones

kHz, so it really ought to be re-calibrated. Are there any issues with this option, before I start into the whole process? 73, Steve VE3SMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] K3 silent on power up

otherwise. Any others see this condition? -Steve- AF5VR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] Ear Buds with Microphone

I bought the parts to make the adapter cable to use my cell-phone earbuds on my KX2. I haven't built it yet. I suspect that your voice won't be quite as full and up-front with the earbuds mic vs. some other, but if you really need to travel light, it should work. On 10/11/17 21:22 PM,

[Elecraft] practicing CW on K2 without transmitting?

that it will not transmit. Please remind me how to do this. Thank you and 73, Steve - KI4EZL -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] KX2 latest beta FW? (and spkr issue)

and the chassis sheet metal. After some very patient work with tweezers, it was removed and my speaker was fixed. I recommend that Elecraft glue a layer of fine mesh fabric to the inside of the sheet metal to protect the speaker from this kind of dirt. Steve Sergeant, KC6ZKT

[Elecraft] for sale K3/10

For sale: K3/10 500HZ filter 200HZ filter hand mic $1350 Please contact me at: steve at thecoatesfamily.net Steve N8JAF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] T1 as remote tuner for KX2/KX3?

I am developing plans a hut-to-hut skit tour in Canada for next winter. On this trip, I will want to operate my KX2 inside of metal-roofed A-frame huts with a 60' feedline (RG-174, RG-58, or 300Ω twinlead?) to some kind of wire antenna outside. I plan to operate SSB on 40 & 20 meters at a minimum,

[Elecraft] band data from the RS232 port while using the USB cable?

Manager didn't work. Finally got it working using the USB cable and I really don't want to go through all that hassle again to try and get PC comms working using the RS232 port. Apparently when you select USB in the menu, it shuts off the RS232 port? Steve, WF3T

[Elecraft] timewave pk232sc

does anyone have experience using the 232sc with the k3? I would like to use one and not sure about the cabling. I used use one with my Orion but that had the din connector and the k3 doesn't. Any info appreciated. 73, tnx, Steve W1DXH

[Elecraft] Look familiar?

Anyone notice the Kenwood TS-590SG pic on the back of the latest QST mag? With a quick glance, remind you of something we like? 73! -Steve- AF5VR > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecr

[Elecraft] Look familiar?

Anyone notice the Kenwood TS-590SG pic on the back of the latest QST mag? With a quick glance, remind you of something we like? 73! -Steve- AF5VR > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecr

Re: [Elecraft] MH4 Microphone Questions

Thanks, Wayne. Very tempting! 73, Steve VE3SMA On Sun, 9/3/17, Wayne Burdick <n...@elecraft.com> wrote: > Can anyone confirm that the dimensions match?  They do. It’s the same size as our MH3, used with the KX2 and KX3. > Has

[Elecraft] MH4 Microphone Questions

for audio quality yet? 73, Steve VE3SMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] FS LP Pan 2

Brand new in box. Perfect for Win4K3Suite panadapter display. Includes pre-amp in -2 model. $150 shipped to US. Steve KB3SII ... .. .. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] K2 Control Software

I have been using Dan's KE6D K2 program for years. It is easy to use, and works great. The link for Dan's page is http://www.qsl.net/ke6d/ 73, Steve K4JPN __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] Make this email list more manageable - a forum instead?

Another vote for a Forum format.  I use forums for several specialty/collector cars.  MUCH easier to navigate and isolate the subjects that interest me.  Using Nabble to find information is time consuming and very awkward. Even though this subject has been brought to Elecraft's attention

Re: [Elecraft] Make this email list more manageable - a forum instead?

t from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help suppor

Re: [Elecraft] [K2] Sensitivity Spec

math this week to make sure, especially without a reliable number for the K2 noise figure. Most likely I'll try it out in the 10 GHz and Up contest this weekend and if it proves to be deaf compared to others' rigs, I'll have to delve deeper. 73, Steve VE3SMA

[Elecraft] [K2] Sensitivity Spec

receiver table lists some measured values at 500 Hz bandwidth but fails to note whether the preamp is on or off for these measurements. So I am not quite sure what the sensitivity should be. Can anyone clarify? 73, Steve VE3SMA

[Elecraft] KPA 1500 and Pure Signal - a DDC/DUC SDR in the Elecraft pipeline?

a big market for ANAN SDR owners buying the KPA 1500 (which, incidentally looks fabulous)? ;-) What say you, Wayne N6KR? Vy 73 Steve, VK6VZ --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

Re: [Elecraft] "Contester's Spectral Display" feature of N1MM software will be supported soon

as forwarding spectrum information to N1MM+ for display by the N1MM+ spectrum display. See: https://groups.yahoo.com/neo/groups/waterfallbandmap/info http://n1mmplus.hamdocs.com/tiki-index.php?page=Spectrum+Display+Window=N1MM+Logger+Documentation 73, Steve, N2IC

Re: [Elecraft] K3: Odd ALC behavior

a stable solution. Steve, K6UM On Thu, Aug 3, 2017 at 1:25 PM, Dave Cole <d...@nk7z.net> wrote: > Hi, > > I have an issue in regards to obtaining 4 bars, and getting the 5th bar > of ALC to fluctuate while transmitting JT65. > > I have plenty of audio, and can drive t

Re: [Elecraft] K3S Kit issue - Does not transmit in SSB

This is a really common problem with Win10. If it has downloaded a new update in the background, but not installed it, many of the drivers quit working. For me it is ALWAYS soundcard #1 that fails. Once a reboot is performed, things start working normally. Steve, K6UM On Tue, Aug 1, 2017 at 9:36

Re: [Elecraft] MAC BOOK KX3 QUESTION

Gerry: I suspect that your MacBook Pro does have an audio input. If there's not a separate mic connector, then the headphone connector probably provides a mic/line input on a 4-conductor TRRS connector. You might have to build a custom cable. On 7/31/17 1:10 PM, Gerry Miller wrote: > HI GUYS,

[Elecraft] KPA500 dead?

ere any other checks before sending it back to Elecraft? Thanks, Steve, K6UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

[Elecraft] Fractal antennas (was: Car interior antennas...)

On 7/16/17 16:16 PM, Emory Schley wrote: > I'm certainly no expert here but a fellow I know once told me that fractal > antennas were showing up in car interiors because they're efficient, quite > small and don't use much material to construct. Something about punching them > out with a die...

[Elecraft] [K1] FS with many options

original manual. $400 incl shipping. Photos available. PayPal or check Steve KB3SII … .. .. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] "Hot" setup for Field Day with op headset, logger headphones, and speakers

for the "gallery" to hear. Thanks, Steve  KO6L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://w

Re: [Elecraft] A VALUABLE FIELD DAY ACCESSORY

On 6/20/17 4:31 PM, Walter Underwood wrote: > If you find one, let me know. This could be useful for em-comm deployments. > >> On Jun 20, 2017, at 4:26 PM, Jack Brindle wrote: >> Does anyone make a distribution / intercom box that allows the two ops to >> talk between

Re: [Elecraft] A question about using the K3S with KPA500 on fullbreak-in

to full-break in, the KPA500 will follow this. Have a great weekend!!! Vy 73 Steve, VK6VZ From: Cady, Fred Sent: Saturday, June 17, 2017 10:51 AM To: Steve Ireland ; elecraft@mailman.qth.net Subject: Re: [Elecraft] A question about using the K3S with KPA500 on fullbreak-in Hi Steve, Maybe

[Elecraft] A question about using the K3S with KPA500 on full break-in

are required between the two transceivers to do this and whether there are any menu selections that need to be made, so I can pass this information onto him. Thank you! Vy 73 Steve, VK6VZ/G3ZZD --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com

Re: [Elecraft] [KX3] HI CUR error with 2m module

Tried it again today and worked FB. Suspect some cruft in the right angle adaptor or the antenna itself. Some canned air and maybe some DeOxit might be tried if problem reappears... 73, On Sun, Jun 11, 2017 at 4:31 AM Don Wilhelm <donw...@embarqmail.com> wrote: > Steve, > > Do y

[Elecraft] mic

Hi I am a new owner of a K3 and I am curious what others are using for mics? A boom mic is my is my preference as opposed to a headset arrangement. Any info appreciated. 73, Steve W1DXH __ Elecraft mailing list Home: http

[Elecraft] [KX3] HI CUR error with 2m module

supply isn't the issue... The only thing I saw in the archive was a mention about a loose SMA connector, but everything looks OK in that respect. Any thoughts? Thanks, Steve AD7OG __ Elecraft mailing list Home: http

Re: [Elecraft] K3 & Heil HM-10 Dual

! This scenario kind of reminds me of the old days of supporting leased data lines when Pac Bell was responsible for the ends and AT in the middle. LOL! Thanks, Steve From: Don Wilhelm <donw...@embarqmail.com> To: Steve Wilson <steve_wil...@yahoo.com>; "Elecraft@mailman.qt

Re: [Elecraft] K3 & Heil HM-10 Dual

OK. And the bias setting? Thanks, Steve From: Don Wilhelm <donw...@embarqmail.com> To: Steve Wilson <steve_wil...@yahoo.com>; "Elecraft@mailman.qth.net" <Elecraft@mailman.qth.net> Sent: Monday, April 17, 2017 8:35 PM Subject: Re: [Elecraft] K3 &

[Elecraft] K3 & Heil HM-10 Dual

of shipping to, or dropping off the rig, at Elecraft for a thorough test?  Thanks, Steve  KG6HJU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] [K2] Odd "Hi Refl"/high current problem only in TUNE

. Any ideas as to what might be happening and how to stop it? 73, Steve VE3SMA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] K3 slightly off frequency

. Is the K3 known, in general, for being slightly off frequency?  Thanks, Steve  KG6HJU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] SSB Net

We do these things, to borrow from JFK, "...not because they are easy, but because they are hard..." On 4/2/17 14:30 PM, Wes Stewart wrote: > And that's all you need to know about QRP. > > On 4/2/2017 1:37 PM, Steve Sergeant wrote >> I knew I didn't have chance to

Re: [Elecraft] SSB Net

nce to be heard using QRP power. --Steve, KC6ZKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.

Re: [Elecraft] Future KX3/KX2 accessories?

If they're going to do that, I'd like to instead or in addition see an adaptor cable for cellphone "earbud" headsets to use both earbuds and the internal microphone on the KX2. PTT would be nice, but optional. On 3/31/17 17:38 PM, Christopher Hoover wrote: > I would like an adapter for the KX2

Re: [Elecraft] Future KX3/KX2 accessories?

I hope we can be more creative than that! How about recording, playback, and automation features, some of which have not yet been imagined. How abut signal processing operations that are beyond the DSP capability in the radio? How about some not-so-distant future when spoken language translation

Re: [Elecraft] Future KX3/KX2 accessories?

back up all of your memories, settings and tunings. --Steve, KC6ZKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This

Re: [Elecraft] Elecraft SSB net

Chuck: I head the SSB net today, but from a 1,960' ridge top above San Jose, CA, using my KX2 and a carefully-tuned loop antenna, I wasn't heard well enough to check-in. --KC6ZKT On 3/26/17 12:28 PM, Chuck Chandler wrote: > Is there an SSB net on some Sunday's but not others? I saw an email

[Elecraft] For Sale KPA500 KAT500 combo

KAT500/KPA500 both built from kits, non smoking home, excellent condition. Pick up in Seattle area only $2100. -- If you forward or copy this message, please delete any reference to my email address. Thanks __ Elecraft mailing list

[Elecraft] KX[2/3] adapter for iPhone-type earbuds & mic? (was: Heil Head Set Question...)

, but using the Xmit button on the front panel would even be more ultralight. --Steve, KC6ZKT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] Beware of the speaker magnet on the KX2

your KX2! :-) Steve  KG6HJU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

[Elecraft] unsubscribe

Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] Elecraft Digest, Vol 153, Issue 1

Excellent Terry. Just Excellent. -Steve- AF5VR Message: 28 Date: Sat, 31 Dec 2016 22:06:04 -0700 (MST) From: Terry <n...@comcast.net> To: elecraft@mailman.qth.net Subject: [Elecraft] All the Amplifier Discussions Message-ID: <1483247164726-7625301.p...@n2.nabble.com> Content-Type

[Elecraft] KPA500/KAT500 with Icom ic-7300

Has anyone successfully run this combination? I have tried rf sensing and get a fault on the amp,or the tuner locks up. tried using the Icom band data to the amp, using the elecraft aux cable between the tuner and the amp, and any combination of the above. It appears not to be mode dependant.

[Elecraft] FS: XV-144 transverter

For Sale: XV-144 2m transverter. Excellent-mint condition. $400 shipped Steve NA5C Sent from my mobile device __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] Elecraft website down - Black Friday event?

Web site is FB here in the Washington DC area. Very low latency. 73, Steve W4FMD On 11/28/2016 12:30 PM, Ralph McClintock wrote: The Elecraft website is down this Monday morning? Overwhelming number of sales? Ralph W1ZK

[Elecraft] External hand mic for KX2

I want to purchase the best hand mic for my new KX2. I have the Heil Pro Set which are headphones and a boom mic, but I also want a hand mic. The Heil HMM iC will work and the Elecraft MH3 will work, but which one is the best? Thanks, Steve - KI4EZL -- View this message in context: http

[Elecraft] FS - XV50 transverter

Elecraft XV50 transverter in excellent condition. Set for 10w output to drive 100w amplifier. Built with N connector for output, but will install SO-239, if desired. $250 shipped via Priority Mail to US. Steve, K6UM __ Elecraft mailing

Re: [Elecraft] [PX3] Does not respond to the knob being rotated

e. I find that if I turn the knob real slow it will work. The knob is an encoder and must be seeing CW/CCW pulses out of sync or something like that? Does slow work? steve WB3LGC On 10/16/2016 12:34 PM, James Austin wrote: My PX3 no longer responds to the knob being turned. The only indica

[Elecraft] Fwd: [K3] Weird behavior on 17m

Helps to send to the proper address. -- Forwarded message -- From: "Steve Ward" <stevew...@gmail.com> Date: Sep 25, 2016 5:17 PM Subject: [K3] Weird behavior on 17m To: <elecraft-requ...@mailman.qth.net> Cc: During the CQWW RTTY contest just concluded I ha

Re: [Elecraft] ] : K2

in line, doing what's it's supposed to do. My point is no matter if you own a K1, K2, or K3, answers, no matter what, can be found here. 73 Steve N2SER On September 21, 2016, at 05:16, Johnny Siu via Elecraft <elecraft@mailman.qth.net> wrote: Hello Eric, Please stay with the reflector. Folk

[Elecraft] Questions about portable vertical and Super Antenna

/37408 (Space Blanket Revisited). It seems to load and work nicely with my KX1 and KX3 internal ATU's, VY 73 de W3UEC (Steve) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] [PX3][PX3SVGA][P3] PX3 to SVGA Large Screen; and Decoded Text to Native P3 Screen

#1 but with HDMI... 73, steve WB3LGC On 8/26/2016 12:15 PM, Joe Stone (KF5WBO) wrote: Thank you, Art. We've been discussing two new features on this thread ... Feature #1. Elecraft to develop an internal adapter (i.e., PX3SVGA) to connect a PX3 to an SVGA large screen. Feature #2. Elecraft

Re: [Elecraft] T1 as stopped tuning correctly.

have a very nice K2 that is loaded, several little elecraft kits, and want to build a K1 soon. I am also saving up for a new factory built K3s. Take care Don, Thanks again, Steve KI4EZL > On Aug 8, 2016, at 3:51 PM, Don Wilhelm [via Elecraft] > <ml-node+s365791n7621386...@n2.nabble.c

Re: [Elecraft] T1 as stopped tuning correctly.

Thanks Don. In the video I posted on youtube, the blinking yellow is actually the self test sending code for each value. The green light was blinking when in first step of tune mode, then touch paddle to start 2nd step of tune mode. Normally it moves around trying different tunings and

[Elecraft] T1 as stopped tuning correctly.

MTR 5b QRP radio, Begali traveller light iambic key. Radio runs on AA batteries, 10-11 volts. It has always worked well before, but now does not tune. Self test results: S=1R0, V=8R9, L=0, C=0, N=t, B=0, F=1R07. Please advise. Thank you, Steve KI4EZL -- View this message in context

[Elecraft] "Blue" topic list

ht be done with this Elecraft reflector? I realize I am being selfish and lackadaisical, but please consider this suggestion. VY 73 de W3UEC (Steve) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailm

Re: [Elecraft] KAT500 cycling

! Anyway after consulting support, I gently separated the two lines and put a double layer of electrical tape between to hopefully prevent recurrence. Steve AD7OG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] Kady K3 Book available

AND card no matter how long it takes to prehend my puny sigs and lousy fist. Alternatively I will pay attention to any other offer or request. Please reply to _dubinse@aol.com_ (mailto:dubi...@aol.com) VY TNX ES 73 de W3UEC (Steve Dubin

[Elecraft] KXPA100

The KPA500 is a great amp. With 15 Watts in (as an example of a KX3), I am measuring 375 Watts out. WM6P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] my KAT-1 and PX-3for sale

Both are sold! Thank you! _Steve k7ew __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net

Re: [Elecraft] KAT-1 and PX-3 for sale

Both of these are now sold (as of June 17, morning)Thank you!pease forward/post as appropriate!-Steve K7EW From: k...@hotmail.com To: elecraft@mailman.qth.net Subject: KAT-1 and PX-3 for sale Date: Tue, 14 Jun 2016 01:00:47 + From: k7ew@hotmail.comTo: elecraft-ow

[Elecraft] KAT-1 and PX-3 for sale

it for $400 + you pay the shipping. Like new! Complete! Nearly unused!Please respond using my email address on QRZ.com. Telephone, if we can reasonably arrange.Thank you! -Steve K7EW Please respond using my email address on QRZ.com

[Elecraft] Question re TXMON

t plug in order to disconnect TXMON sensor cable. TNX ES 73 de W3UEC (Steve) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth

[Elecraft] Elecraft K3 to SPE expert 1.3K-FA amp

Anyone out there using the above-mentioned setup? Looking for some guidance to interface CAT. I'm having intermittent transmission using ANT 1 but ANT 2 seems to work fine. Any ideas or hints? 73 Steve AA4V 843-834-1616 Sent from my I-Phone

Re: [Elecraft] [KX3] HFpack and the KX-Line

ould be easy to design! (Reference: Icom LC-156 pouch for 706 or 703 face plate - only better!) Steve aa8af > On Jun 3, 2016, at 11:48 AM, Wayne Burdick n...@elecraft.com [KX3] > <kx3-nore...@yahoogroups.com> wrote: > > Hi all, > > HFpack is a form of pedestrian mobile (/P

[Elecraft] KX2/CO to UK Wire-n-Tree, 10W-17m SSB! (SFI=86 Spots=58)

le KX2 using a 29' wire in tree @ 25' w/10w SSB!!! Woohoo! ...made my day! Who says the bands are dead!? Steve/wGOAT Sound file of Phil (rough QRM!): https://soundcloud.com/goathiker/g4obk Photos: https://flic.kr/s/aHskAMQb5N __ Elecraft

[Elecraft] Dick Tracey radio

on Mon, 23 May 2016 23:49:37 -0400 Don Wilhelm _donwilh@embarqmail.com_ (mailto:donw...@embarqmail.com) writes: To: elecraft@mailman.qth.net Subject: Re: [Elecraft] The KX2 "Is the Dick Tracy "wrist radio" next? How do the paddles connect to that one?" My response: Due to superior

[Elecraft] SP-3 Speakers SOLD

They're gone. Thanks to the multitude who replied! N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] FS: SP-3 Elecraft Speakers

on the top toward the rear on one speaker. These sell new for $180 each! I'm asking only $199.95 for the pair! You add shipping. PayPal Please Steve N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] P3 with SVGA SOLD

The P3 I listed here is now sold. 73 to all. Steve N4LQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] FS: P3 with SVGA 6mo. old

ables and manual included of course. After using a panadapter you will never be satisfied without one. You have no idea how many signals you miss by tuning blind! PayPal accepted. Offers entertained. Steve n4LQ __ Elecraft mailing list Home:

Re: [Elecraft] [K2] External amplifier keying circuit question

Initial testing using the two-MOSFET circuit (http://www.mmccs.com/mmarc/n0ss/k2_t-r_rly_drvr.pdf ) with two 2N7000s, but with R3 removed, indicates that it is working fine, switching a load of about 50 mA at 12-13V. I left R2 in. Thanks all for your comments. 73, Steve VE3SMA

Re: [Elecraft] [K2] External amplifier keying circuit question

Thanks, Don.  Good point re the input side...I guess I'm not used to having plug-in boards in mind! Yes, I was thinking of a pair of 2N7000s - they are fine for the current and voltage I need to switch. 73, Steve VE3SMA

[Elecraft] [K2] External amplifier keying circuit question

(on the K2 RF board) which will do that for the 1st MOSFET, and the 1st MOSFET will pull down the gate of the 2nd one when needed.  Maybe something odd will happen on power-up or power-down? Any thoughts? 73,Steve VE3SMA __ Elecraft mailing

[Elecraft] Last call for FDIM registration

Every seminar visitor gets a free kit to build during the presentation - no tools required 73 Steve Fletcher, G4GXL -- QRP ARCI President - www.qrparci.org Facebook - www.facebook.com/qrparci Twitter - www.twitter.com/qrparci __ Elecraft

Re: [Elecraft] KIO3B woes

That was it! ID10T error strikes again On Friday, May 6, 2016, Ed Muns <e...@w0yk.com> wrote: > Make sure you have set 'USB' in the K3 CONFIG menu RS232 item. > > Ed W0YK > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net <javascri

[Elecraft] KIO3B woes

part again tonight just to get on the air for the contest tomorrow, but it's starting to look like that's my answer. Please copy me on any replies because I get the digest version of the reflector and it'll be a while before another one comes through. Thanks everyone! 73, S

[Elecraft] Stiffer KXPD3 spring

Has anyone found a stiffer than stock spring for their paddle? I already have the stiff one in there but I think it's too light. Thanks,N9SKMSteven M __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] [K3] K3EXREF not working

installed the K3SYN3A a few months ago. I didn't check to see if the K3EXREF was locking to the external reference. Any ideas on how to troubleshoot this? Thanks, Steve, K6UM __ Elecraft mailing list Home: http://mailman.qth.net/mailman

<    1   2   3   4   5   6   7   8   9   10   >