Frankly I'm surprised, but the K3 manual available online doesn't have
hyperlinks for the page numbers in the TOC. Is there a version available
somewhere with hyperlinked page numbers? Usually this is caused by not saving
the PDF with the correct options. If there isn't one, then I encourage
I've had the K3 and P3 for a while. Bought them used from a SK estate. I've
always felt that it hasn't quite worked 100%. I've followed the manual and Fred
Cady's book about adjusting audio, gain, etc. Today for the DX contest, I just
couldn't make consistent contacts, but I made some. Whenever
Hi there,
I'm assisting my godfather with setting up a new KAT500 & KPA500 to add to his
K3/P3.
Issues I am having:
1) KAT500 makes quite a racket whenever keying up. It seems to settle down, but
as soon as I speak, it freaks out again. He has two antennas...a hex beam on
ant 1 and a G5RV on
Hi all,
With Field Day behind us, and since our club runs mostly K3's, I thought I'd
ask if anyone had suggestions for the best way to configure the K3, use
adapters, audio distribution box of some sort, etc., to allow for a headset for
the operator, headphones for the logger, and speakers for
h.net"
<Elecraft@mailman.qth.net>
Sent: Monday, April 17, 2017 8:35 PM
Subject: Re: [Elecraft] K3 & Heil HM-10 Dual
Steve,
Heil is giving out erroneous information. The low output Heil
microphones require setting the K3 mic gain range to HIGH.
73,
Don W3FPR
On 4/17/2017 11:
Heil HM-10 Dual
Steve,
Heil is giving out erroneous information. The low output Heil
microphones require setting the K3 mic gain range to HIGH.
73,
Don W3FPR
On 4/17/2017 11:14 PM, Steve Wilson via Elecraft wrote:
> Hi all,
> I setup a K3, that my godfather is borrowing, while his Kenwood is
Hi all,
I setup a K3, that my godfather is borrowing, while his Kenwood is off the air.
I reviewed the webpage on the Heil Sound website here:
https://heilsound.com/heil-amateur-radio/support/dsp-settings/all-things-elecraft/
Unfortunately, the page refers to the mic with regard to the front
A few of us in Fremont, CA have a weekly 10 meter net. I have a friend with a
K3 who always sounds off frequency. When I use my K3, I've been told that I am
off frequency. There are a couple of KX3 users who don't seem to have a
problem. When I use my Kenwood TS-590 I seem to be on frequency.
The other day I turned on my newly acquired KX2 (thanks Santa!) and found that
the audio had a horrible buzzing noise. I started to assume the worst, but I
didn't have time to troubleshoot it.
This morning, I turned on the rig and observed the buzzing again. I turned the
rig over and started to
Hi all,
I have a newly acquired slightly used K3. Feedback on my voice audio quality
is that it sounds tinny with no low or mid range. Unfortunately, the K3 manual
really doesn't provide much guidance on how to adjust the transmit EQ other
than the mechanics of what buttons to push. If I
10 matches
Mail list logo