If interested, here's a short video I made of the event, which also
showcases the KX3 and KXPA100
https://youtu.be/s_7H2Z6rpQE?si=xZ1XnbDaUnXMXS0L
On Fri, Mar 1, 2024, 12:17 PM Tim Tucker wrote:
> Sorry, 14.260
>
> On Fri, Mar 1, 2024, 10:25 AM Tim Tucker wrote:
>
>>
Sorry, 14.260
On Fri, Mar 1, 2024, 10:25 AM Tim Tucker wrote:
> Hi all,
>
> I'm activating the Pennzoil 400 at Las Vegas Motor Speedway usingrhe
> Elecraft KX3 and KXPA100. I'll mostly be around 14.6mhz for a few hours
> during the day all weekend if you'd like to make the c
Hi all,
I'm activating the Pennzoil 400 at Las Vegas Motor Speedway usingrhe
Elecraft KX3 and KXPA100. I'll mostly be around 14.6mhz for a few hours
during the day all weekend if you'd like to make the contact.
Tim
AE6LX
W9WDX Amateur Radio Club
Assuming you're using the Elecraft mic with the up/down buttons - turn the
buttons off in the radio settings. There is a known and reported bug in
both the KX3 and KX2 that has never been fixed that causes this problem.
Tim
On Mon, Feb 26, 2024 at 1:40 PM wrote:
> I have he
met with radio silence for months. Expect more of
the same at this point.
Tim
On Sun, Dec 10, 2023, 11:34 AM George Danner wrote:
> 4. Transmit Monitor
>
> 73 George AI4VZ
>
> On Sun, Dec 10, 2023 at 11:29 AM Dave wrote:
>
> > Wayne, if you can return to a single trac
Yes, of course. Works fine.
On Sun, Dec 3, 2023, 8:37 AM Steve McKee wrote:
> Hello,
> I’ve have the 2 meter module in my KX3, and am wondering if I can hook a
> small VHF amplifier to it, to increase power output??
> I’m planning on purchasing the KXPA 100 for the HF side….
> Course these are
overlooking?
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Ah...so this means us Elecraft users are waiting on this feature to be
implemented in the K4...got it, thanks!
Tim
On Sun, Feb 19, 2023, 3:56 AM David Decoons wrote:
> The sample output on the amp is already enabled. You just need a radio
> that supports adaptive predistortion.
>
&g
Is there an ETA on when the TX Sample output on the KPA1500 will be enabled
for Pure Signal?
Thx,
AE6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
How about the KX3? I tried to dial it up there and it bounced to 44.000.
Tim
On Wed, Jan 25, 2023 at 12:14 PM Wayne Burdick wrote:
> The K3, being a superhet that involves mixers, uses very narrow-band
> transmit band-pass filtering that doesn't allow operation midway between 10
&
Is your K2 one with a PA Key out? If so, just an RCA cable and a coax
jumper.
Tim
On Wed, Jan 11, 2023 at 4:03 PM Karin Johnson
wrote:
> Hello Group:
>
> Can I use a Elecraft KPA1500 with a Elecraft K2???
>
> What accessory cable will I require
>
>
>
> Karin
You'll need to answer the "for how long" question to get a good answer.
I sometimes use my KXPA100 and KX2 for POTA operations. My 30Ah Bioenno
LiFePO4 battery easily powers the combo doing CW or Phone for several
hours of operation at a moderately high TX/RX duty cycle.
Tim N9PUZ
Mine has worked flawlessly for the year or so that I've had it. I've
pushed it pretty hard and for pretty long durations with some digital
modes, as well. So far, so good.
Tim
On Mon, Oct 31, 2022 at 3:18 PM Frank Scolaro
wrote:
> Of the 5 people I know with the KPA1500, 3 of them have m
Assuming the Power Supply is sufficient, the next thing you should do is
the KX3 + KXPA100 Power calibration. I did this for a fellow ham and it
solved a similar situation:
https://ftp.elecraft.com/KX3/Mod%20Notes%20Alerts/KXPA100+KX3%20Power%20Cal%20rev%20A.pdf
Tim
On Wed, Oct 26, 2022 at 9:10
The easiest way is to set the defaults per band in the KPA1500 Utility.
Tim
On Tue, Sep 13, 2022 at 10:11 AM Jorge Diez - CX6VM
wrote:
> hello
>
> How can I use the KPA1500 to remember what bands need ATU IN and what bands
> need ATU BYP?
>
> I have ATU IN on HF bands, but
effective) reduce QSB.
Tim
On Wed, Aug 31, 2022 at 9:52 PM Jim Brown wrote:
> On 8/31/2022 5:33 AM, John Stengrevics wrote:
> > I was told that a preamp can be connected across the RX ANT IN/OUT jacks
> and that certain settings are then changed to make this work.
>
> Connect
Both of the solutions proposed show audio out specs of 192khz, but mic-in
specs of only 48khz.
Tim
On Thu, Jul 7, 2022 at 6:16 AM Gerry Hull wrote:
>
> https://www.amazon.com/Cubilux-Headphone-Converter-External-Compatible/dp/B08L9C7233/ref=sr_1_5?crid=2NTEYK41W90KM=192khz+usb+soun
with
a Raspberry Pi 400. Any ideas?
Thanks!
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Elecraft version, but I would be very (pleasantly) surprised if it
could match the performance of a well designed heat sink such as these.
https://www.worldwidedx.com/threads/cooler-kx-plus-heatsink-for-elecraft-kx3-installation-video.179532/
Tim
On Mon, Jun 13, 2022 at 8:21 PM Jim Brown wrote
Lol, yep. That's why code coverage is a necessary metric in unit testing.
On Wed, Jun 1, 2022, 9:42 PM Walter Underwood wrote:
> > On Jun 1, 2022, at 7:30 PM, Wayne Burdick wrote:
> >
> > "There's always another bug," to quote an anonymous sage, but
> please...go for it. We'd love to get
Thanks Don. He says that you're the one that built it for him and has been
back to you a couple of times (for what, I'm not sure). I'll ask him for
the serial number; it's the K2/100 with DSP and SSB, as well as the KAT100
to go with it.
Tim
On Tue, May 31, 2022 at 2:46 PM Don Wilhelm wrote
Once you figure it out and if you do sell, please let us know what you get
for it. A local here has a loaded K2/100 that he's been trying to sell for
a while but has only received what he perceives as low offers. I'm
interested to find out where the market for these is at.
Tim
AE6LX
On Tue, May
I would just call them if there was no response to an email.
Tim N9PUZ
On Fri, May 13, 2022 at 1:37 PM Chris Cox, N0UK wrote:
> I have emailed Elecraft Support twice this week but have received no reply
> or acknowledgement.
>
> Anyone know if they’re working this week?
for portable opps.
If your interested drop me a note at w...@earthlink.net or txt to
704-453-1958
Safe travels if your coming to Xenia.
73 Tim W4YN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
lectronics.
Tim N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
a continuous support system for loyal owners and keeps the
developers working on current and new products. Seems good for both the
company and customers.
I sure hope there never comes a time when I cannot repair my beloved KX2
through Elecraft or another capable outfit.
Tim N9PUZ
, but nothing happens. From memory, the interfering tone is
around 2Hz, but I can't seem to make it work on AM. Is this a feature that
isn't quite working on AM as expected yet?
Thanks,
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
garbled tx...i can hear it by pulling the speaker cable and
monitoring on the rig. Any insights would be appreciated.
Tim
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
This is a listing for a local ham, W6KLE who is not on this list. He would
like to sell his K2/100 with DSP and ATU (10-80m). The rig is pristine and
the asking price is $1400. Contact me off list for contact info.
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
In the original post, he stated that he specifically did not want an
electret element, has found the dynamic replacements and is not interested,
but wants a crystal element replacement. Most of the links offered do not
offer what he is looking for. So I stand by my original statement with the
Are you referring to the original non amplified D104? If so, there is no
replacement available. There is a lengthy thread about a proposed
(dormant) project to recreate the element here:
https://www.worldwidedx.com/threads/d-104.241890/
Tim
On Tue, Feb 22, 2022 at 11:22 AM Wilson Lamb via
That element only works on the powered / amplified model.
On Tue, Feb 22, 2022 at 2:35 PM Dean Adinolfi wrote:
> W2ENY element works great.
>
> https://www.w2eny.com/
>
> Dean, KD3ANX
> __
> Elecraft mailing list
> Home:
for contact details. He is a motivated seller because he wants to buy my
K3 :)
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I believe that Wayne posted in the past week or so that there are still
some KX2 components that they have not received.
Tim N9PUZ
On Thu, Feb 17, 2022 at 9:35 AM Bill Frantz wrote:
> If the MH3 is what’s delaying your radio, the KX2 is quite usable with its
> internal microphone. You
product. There are less costly
tuners and amps on the market but I believed Elecraft would be the most durable
and reliable.
Before I purchase another Elecraft product I will do even more research and
comparisons.
73, Tim WB8HRO
Yes.
On Mon, Jan 3, 2022 at 8:30 AM Larry Boekeloo wrote:
> Do most of you leave your KPA-1500 Power Supply powered up all the time
> even with the RF Deck off?
>
> Thanks.
>
> Larry, KN8N
> Kalamazoo, Michigan
> __
> Elecraft mailing
If you're just going to use WSJT-X (or JTDX, which is what I use) for
non-contest / casual operation on the main FT8 frequencies, I don't think
using the split/fake-it option is necessary. Contesting is a different
thing. To get started with casual use, just use the TX/RX split option on
the
While I own both the KX2 and KX3, when I was trying to work HD8R on 40m
with an Inverted V in the early evening here in SoCal on FT8, there was a
HGE pileup. In my case, the K3 (upgraded to K3S) with the KPA1500 was
the trick. It took me an hour and a KW, but I finally got through. So I
I believe 7.030 is the normal QRP CW frequency, at least in NA. There are a
lot of SOTA and POTA activators who seem to choose 7.060.
Tim N9PUZ
On Fri, Sep 3, 2021 at 10:37 PM Wayne Burdick wrote:
> The opinions on this are bimodal: some say ~7030, others ~7060. Hopefully
> someon
really hope Elecraft gets the USB-C upgrade into the
backlog soon.
Tim
On Thu, Aug 19, 2021 at 2:32 PM Dave Van Wallaghen wrote:
> It is a Niuto 14" TouchPad. I just bought one and it works nicely with the
> K4.
>
> https://www.amazon.com/Portable-Touchscreen-External-Comp
Contact Elecraft directly and send a copy of your MARS license. I did MARS
for several years and never had a problem getting the mod apps for Elecraft
gear. They even used my feedback on the frequency ranges to ensure that the
radios were usable on the necessary frequencies.
Tim
On Wed, Aug 11
If the ask of the electrician was to change the 110v outlet to 240v, his
response will be - you can't do that. If the request was to add/pull in a
new 240v circuit, he will be able to do that assuming your existing panel
supports adding the circuit.
Tim
On Thu, Aug 5, 2021 at 9:46 AM Louandzip
Can you post a picture of the signal?
On Tue, Jul 20, 2021 at 2:35 PM Fred Jensen wrote:
> 1. Is this list still active? Seems like ages since I've seen any
> activity. Wonder if foothill.net has it blocked?
>
> 2. I have a strange noise on 80. It consists of what appears on the P3
> to be
er through the ANT1 socket or via
AUX antenna socket.
The firmware has been updated to the latest versions for MCU, FPF, and both
DSP units.
Any help would be most welcome.
73 de Tim G4ARI
__
Elecraft mailing list
I've read this whole thread and I'm confused. I control my KPA500 and KAT500
remotely. When shutting down my station is shutting down the Elecraft
equipment adequate remotely?
Thanks ES 73 DE TIM WB8HRO
__
Elecraft mailing list
I've read this whole thread and I'm confused. I control my KPA500 and KAT500
remotely. When shutting down my station is shutting down the Elecraft
equipment adequate?
Thanks ES 73 DE TIM WB8HRO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
on a power meter when using
AM. Example: you set the AM carrier at 25 watts, expecting modulation to
100 watts, but instead you observe 25 watts deflecting to 15 watts. I
don't know why that occurs, but I do know that flipping the Invert phase
switch solves the problem.
Tim
On Thu, Jun 24, 2021 at 11
Jim Brown wrote:
> On 6/23/2021 11:57 AM, Tim Tucker wrote:
> > the other features the EQPlus brings to the table are hard to beat.
>
> Like what?
>
> 73, Jim K9YC
> __
> Elecraft mailing list
> Home: http://ma
Your comments about the EQ are interesting to me. I continue to use a
W2IHY audio stack into my K3, because while the 8 band EQ works well in the
K3, the other features the EQPlus brings to the table are hard to beat. As
I wait for delivery of my K4, one of my ponderings is if I will finally be
If anyone needs the external 6m preamp for an original K3, I have one I
would part with for a reasonable price.
Tim,
AE6LX
On Mon, May 24, 2021 at 7:33 AM Linda M wrote:
>
> __
> Elecraft mailing list
> Home: http://mai
I looked yesterday at JTDX and didn't see K4 in the rig list. I
am apparently blind, because there it is :)
On Wed, Apr 7, 2021 at 12:49 PM Paul Van Dyke
wrote:
> Andy
> Yes, but Before I left on my business trip the K4 designation was not
> there yet. But it worked fine with a K3S..
>
Subject asks the question...will it work by selecting the K3S as the rig?
Has anyone who owns one try this yet?
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home:
After playing with it this evening, I can confirm everything is working as
intended. Typos happen...no biggie
On Fri, Mar 26, 2021 at 7:47 PM Wayne Burdick wrote:
> Typo. Should have said 5.63, I believe.
>
> Wayne
> N6KR
>
>
> > On Mar 26, 2021, at 6:01 PM, Tim Tucke
this version of the K3 MCU?
Tim
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
oCal that have no trees or bushes of any meaningful
height. In those cases, using a man-pack type of vertical (like the
Chameleon) is a very convenient antenna to use with a KX2 or KX3.
Tim
On Mon, Mar 22, 2021 at 8:24 AM Jeff Grillo wrote:
> I am considering purchasing a Chamaeleon MPAS Lite a
Using FT8 with the KX3 is pretty simple. I've used it with both the
standard USB and USB DATA A mode. Hook it up just like any other digital
mode, adjust the volume on the rig and level out on the PC, look at the
meter settings in the software and make contacts.
Don't make it more complicated
64 bit
73, Tim WB8HRO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help supp
Mine does that too. What works for me is to tweak the mic gain up and then
back to the same level and it starts working normally. Seems to me like
there is a firmware bug with the radio that hasn't been figured out and
addressed yet.
Tim
On Sun, Feb 28, 2021 at 6:08 PM Brian Hunt wrote
Adjusting the AGC threshold and slope on my K3 to my liking made all the
difference for me. I did the same on the KX3 and KX2, as well.
Tim
On Wed, Feb 17, 2021 at 11:21 AM Don Wilhelm wrote:
> Mike and Brett,
>
> Go to my webpage www.w3fpr.com and scroll the left column to the &q
W2IHY has switch box solutions that should do the trick.
Tim
On Thu, Feb 4, 2021 at 11:57 AM Lou W0FK wrote:
> NJ8M wrote
> >> Ideally, I could turn off the K3S, switch the feedline from the K3S to
> >> the
> >> 101ZD, and have use of both the tuner and amp. I
The new I/O board was also an option that was sold separately as an upgrade
to the K3, as was the KXV3B, where the pre-amp was located. If you find a
K3 with all those upgrades plus the synth (like mine ;), it's pretty close
to the same thing as the K3S.
On Mon, Jan 25, 2021 at 7:48 AM AB1DD
I plan to buy one of these to interface the K4 ethernet to my home Wifi:
https://www.amazon.com/IOGEAR-Ethernet-2-WiFi-Universal-Wireless-GWU637/dp/B018YPWORE
On Thu, Jan 14, 2021 at 7:02 AM Bill Frantz wrote:
> It sounds like I might be in trouble since the only Internet
> access in my
with legal limit usage. I've always
thought that this type of functionality could be built into the K3/K4 since
it already has a separate RX input. Maybe Elecraft would consider it in a
future OS upgrade feature for the K4?
Tim
On Thu, Jan 7, 2021 at 3:46 PM Louandzip via Elecraft <
elecr
time-consuming and more complex than OpenWRT for
example, community based development may have more umph than Elecraft might
have as far as inclination to tweak old radios.
Just a thought.
On Tue, Nov 24, 2020 at 1:35 AM Jim Brown wrote:
> Tim,
>
> It's important to realize the the
Tim,
I'm an owner of 3 Elecraft radios and am a huge fan of the products. But
one thing that the last few years has shown is that Elecraft does not have
a great track record of developing new features or technologies into their
existing transceiver products. They release updates and patches
Hello, all,
I'm a brand new and generally satisfied Elecraft KX2 user.
I'm just wondering what sorts of features are in the oven for future
versions of firmware. SDR code is neat because it can add new features;
but that really only is a benefit if cooks are in the kitchen. How long
will new
I often operate my KX2 from the internal battery. As a "backup" source I
frequently just take a second KXBT2 along. When you plug it into the
external power jack the KX2 will draw it's power from the pack with the
higher voltage.
Tim N9PUZ
On 11/6/2020 6:56 PM, Wayne Burdick wrote
The 12V Bioenno batteries have an internal battery management circuit.
They require 14.6 - 15 Volts input to charge properly. The BMC will
prevent overcharging and Bioenno Support says it is safe to leave the
charging voltage permanently applied.
Tim N9PUZ
On 11/6/2020 5:06 PM, Bob Conder
the
gain back to where I started with.
Tim
On Fri, Nov 6, 2020 at 4:46 PM K6YXH wrote:
> My KX2 has zero power out. It just stopped working one day. No idea why -
> it's running off a a LiFePO4 battery. Power is set to 5W. Antenna tuner
> bypassed. Running into a dummy load. Does it on
Hi all,
W6KLE called me last night and asked me to let the group know that he has
reduced the price for the K2/100 package to $1400.
I have personally used this rig and it is pristine, as described.
Tim
On Wed, Oct 21, 2020 at 7:26 PM Tim Tucker wrote:
> Listing this for a local ham W6
Listing this for a local ham W6KLE who is not on this list. Contact info
is below:
--
Selling my elecraft K2 100 watts with KAT 100
10/80 meters built in DSP all filters real time clock and more
All manuals
Works great built
I'd be up for that. The KX3 is my favorite radio. After I got the KX2 and
started enjoying its internal Li-ion battery pack, I realized that the
KX3's internal NiMH battery charger is its worst feature. I too never use
it anymore and have just switched to a small, external LifePO4 pack.
Tim
If you live somewhere that has farm supply store like Big R, Rural King,
etc they usually have a good selection of stainless hardware.
Tim N9PUZ
On Sun, Jun 21, 2020, 10:54 AM Eric KG6MZS wrote:
> Hello All,
>
> I’ve had two antenna connectors fail in the last year because the cheap
&
several Bioenno batteries I use on my KX2 and other radios. They
work great! I expect you could run the entire Field Day with the 12Ah one.
Tim N9PUZ
On Mon, Jun 1, 2020 at 6:42 AM Doug Daniels wrote:
> I'm hoping to get my KX2 for Field Day, and am looking to get an external
> battery
Very nice Dave! I especially like the cable raceway to keep the power
leads and coax neat.
Tim N9PUZ
On 5/22/2020 7:10 PM, Dave Cole wrote:
To the new home for my K3 project...
https://www.nk7z.net/rf-patch-panel/
See last 4 at the bottom
I'm curious, have people been seeing these high tempts indoors or
outdoors? I notice a significant temperature difference with my KX2 when
operating outdoors by just keeping it in the shade. I do have a third
party heatsink.
Tim N9PUZ
thought out, feature set.
Tim N9PUZ
On Wed, Jan 29, 2020 at 9:07 PM Charles G. Saunders
wrote:
> Hi all,
> Just curious, I haven't seen much of anything on the KX2's here.
> My first Elecraft rig and really having a good time learning.
> 73, K
I have the KIO3B main / digital / audio boards and the original XVTR board
for sale. Make an offer...
--
Owner, worldwidedx.com
AE6LX, Amateur Radio
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
.
Tim N9PUZ
On Mon, Dec 9, 2019 at 1:47 PM Brian Hunt wrote:
> I got 25 or so removal/installs out of the KX2 battery before one of the
> power leads broke off where it entered the battery pack. I figured it was a
> manufacturing defect where the wire fatigued without support of the
>
m wire" antenna.
The lengths aren't really very random, they are specifically chosen to be
easier to match. At 58.5 feet you arrived at one of the good lengths.
<https://udel.edu/~mm/ham/randomWire/>
Tim N9PUZ
On Thu, Oct 10, 2019 at 11:03 AM Joseph Shuman via Elecraft <
elecraft@mailman.qth
I have not paid a lot of attention to recent asking prices but you might
also consider shopping around for a used Elecraft K3.
Tim
On Tue, Oct 8, 2019 at 10:21 PM Randy Heise
wrote:
> So, background! I have just returned to the air after an 18 year hiatus
> other than keeping my lice
't imagine that they
would do something that would preclude you from using an application you
already like.
Tim N9PUZ
On Mon, Oct 7, 2019 at 12:43 PM Josh Fiden wrote:
> Unless you’re operating portable with extreme equipment limitations, I
> can’t imagine why you’d want your radio’s computer to run
into the female coaxial connector on the Elecraft supplied battery charger.
TIA,
Tim N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
I always tell people the best thing I ever got for making my hobby
purchases simple was a really nice sewing machine.
Tim N9PUZ
On 5/6/2019 3:51 PM, Jim Brown wrote:
On 5/6/2019 1:11 PM, Phil Kane wrote:
My wife can't say anything about my radio gear because I can take a look
at her art
Measuring it would be a perfectly acceptable and desirable solution. Except
I do not have the amplifier here.
Tim N9PUZ
On Fri, Mar 22, 2019 at 11:35 AM Mike Harris via Elecraft <
elecraft@mailman.qth.net> wrote:
> Is measuring it out of the question?
>
> Regards,
>
> Mik
Is there a chart or formula that describes the input current required for a
KXPA100 amplifier at various power output levels? In a battery operation
scenario I'm curious about the current draw at say 50W output vs. 100W
output.
Tim N9PUZ
Selling an Elecraft K3S/100 and P3 with current firmware.
It was purchased on 5/22/2018 built by me. Serial number 11623.
I am selling it as I am now using a different radio.
MH4 Hand Mic
KAT3A ATU
KTCX03-1 (TCXO 0.5ppm)
KBPF3a (Gen coverage RX module)
K144XV (Int 2m module)
K144RFLK (reference
. With an email list I suck down all the
messages and my email client (Thunderbird) happily sorts them according
to my filters with no effort on my part.
Tim N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Just don't drink too much Guinness while you're building!
Tim N9PUZ
On Tue, Dec 4, 2018 at 10:03 PM Wayne Burdick wrote:
> Hi Bill,
>
> 26 hours may be a record time for a basic K2 build. (I'll have to consult
> Guinness.)
>
> If you do it again, you could aim even higher
Macrium Reflect. Backups plus the ability to perform a "bare metal
restore" if your drive goes sideways.
Tim N9PUZ
On 9/28/2018 8:04 PM, John Saxon via Elecraft wrote:
I am not happy with my current backup software package. Any recommendations on
backup software? Like it
mped the calibration to "1". Having done all of
that the radio seems to be about a minute fast after a week. Plenty good
enough for me and well within what Elecraft claims it should do.
Tim N9PUZ
On 8/26/2018 11:00 AM, Don Wilhelm wrote:
Tim,
I would suggest trying again to recalibrate
wondering if I can get a working internal clock for less
than $80 plus shipping?
Tim -- N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
That worked. Thanks. I would be interested in that.
73
Tim, KQ8M
k...@kq8m.com
On July 20, 2018, at 11:25 PM, "Bob Wilson, N6TV" wrote:
Hmm. Try https://bit.ly/Visalia2018 and scroll down to about photo #34.
73,
Bob, N6TV
On Fri, Jul 20, 2018 at 8:13 PM, Tim Herrick wrote:
So
That
73
Tim, KQ8M
k...@kq8m.com
On July 20, 2018, at 11:25 PM, "Bob Wilson, N6TV" wrote:
Hmm. Try https://bit.ly/Visalia2018 and scroll down to about photo #34.
73,
Bob, N6TV
On Fri, Jul 20, 2018 at 8:13 PM, Tim Herrick wrote:
Sorry Bob, I get:
403. That’s an error.
W
Sorry Bob, I get:
403. That’s an error.
We're sorry, but you do not have access to this page. That’s all we know.
when I tried to access.
73
Tim, KQ8M
k...@kq8m.com
On July 20, 2018, at 9:44 PM, "Bob Wilson, N6TV" wrote:
Before y'all run out and order one of these CAT Routers,
automatically, having the computers complete the QSO just doesn't get my
motor running.
Tim N9PUZ
On Fri, Jun 1, 2018 at 11:59 AM, Al Lorona wrote:
> I wrote an April Fool's article back in like 1999 (I might still be able
> to find it on dejanews) describing a make-believe ARRL contest
If packing material you don't happen to like is the worst thing that
happened to you today then it was a pretty fine day overall.
Tim N9PUZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
He mentions on the web site that the final version will likely have
vents and forced air cooling.
On 4/8/2018 7:36 PM, Walter Underwood wrote:
Another box with the heatsink enclosed in a space with no ventilation. It looks
neat, but it is a great way to cook those power transistors.
wunder
He does beautiful work. I don't have any desire to make my KX2 larger
but some of the things he does give me a few ideas on how I might make a
sleaker looking home for the KX2 when it's at home on my desk lashed up
to the KXPA100, key, speakers, etc.
Tim N9PUZ
On 4/7/2018 4:02 PM, John
.
Specifically, is there a way to disable the sub receiver? I looked for
something in the Config menu but did not find anything relevant.
I suppose I could remove it but that seems drastic.
Any other simplification suggestions?
Tim K9WX
__
Elecraft
1 - 100 of 491 matches
Mail list logo