Re: [Elecraft] K3 linking VFO A and B

Thanks Don... missed that. Might be helpful to have an updated K3 operators manual 73 John VE3NFK -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] K3 linking VFO A and B

- it turns on without linking; and then any further 'hold' turns on diversity. What am I doing wrong? Thanks John VE3NFK -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailma

[Elecraft] Ceiling fan interference

hey are DC motors, RF ? remote control units (but it only emits when you use it). Thanks! 72/3 John VE3NFK -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] OT Looking for PC advice.

Hi Deni Comme les autres Win 10 c'est bonne avec Classic Shell; tous mes programmes 'ham' marche bien. Mon favori TRX-Manager F6DEX c'est tout capable avec Win 10 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/OT-Looking-for-PC-advice-tp7617779p7617826

[Elecraft] KX3 - calibration SWR 99.9-1 is too high for calibration

Hello Just finished updating firmware; using latest utility pgm; radio works fine - 'tune' into dummy load gives 1.1-1. Calibration from utility instantly fails at 1.900 99.9-1 SWR. Can't think of anything to try - commercial dummy load directly connected. Thanks 72 John VE3NFK

Re: [Elecraft] HP50G

If you have an ipad, ipod, iphone; this $10 app will let you have an HP50G https://itunes.apple.com/us/app/hp50g/id553279622?mt=8 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/HP50G-tp7605875p7605904.html Sent from the Elecraft mailing list archive

[Elecraft] fixed was Re: problem KRX3

Hi I like to see the resolution of problems.. so here goes for mine.. With the expert help of Howard at Elecraft; 3 phone calls and 2 emails later; the problem was Synth2 not working ... the fix was to remove it - look at it :-) and replace it. Now the sub RX works great. 73 John VE3NFK

[Elecraft] problem KRX3

rx - can hear band noise but that is all sensitivity on the low bands (300khz-900khz) does seem to be improved at all. Advise as to what I have done wrong would be appreciated! 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/problem-KRX3-tp7604424

Re: [Elecraft] K3 - HRD rig control

http://www.hosenose.com/TRX-Manager/trx-manager_features.aspx and integrates with Logic if you want. 73 John VE3NFK disclaimer - long time alpha /beta tester -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HRD-rig-control-tp7603949p7603956.html Sent from the Elecraft

Re: [Elecraft] Elecraft KX3 IQ out and spectral display pograms

Hi Jim Thanks for the information - possibly you might suggest what the end user might do to fix the KX3 pin 1 problems on the other connectors? thanks and Merry Christmas 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-KX3-IQ-out-and-spectral

Re: [Elecraft] K3 - new release of HRD

Hi Not to try and take this off-topic - and nothing against HRD, but TRX-Manager has COMPLETE control of K3 and KX3 with all features enabled and is less expensive at $75.00 including support trx-manager.com free demo I am a long-time Beta tester, 73 John VE3NFK -- View this message

Re: [Elecraft] K3 P3 KPA500 Navigator Help Needed

Hi Jim tried to send to you directly - but 'hidden email' didn't work: I have K3, P3, KAT500 and KPA500 with Navigator to Win 8.1 system working fine - just had to redo the whole thing due to an 'house issue' 73 John VE3NFK john.turgooseatgmail.com ps understand frustration

Re: [Elecraft] K3 default frequency - fixed

Gary of Elecraft suggested trying the 2 VFO's A and B and seeing if that would work before doing a EEINIT. I am pleased to report that fixed the problem.. tuned VFO A to 740 khz - then AB then powered off and on and it kept the 740 freq Thanks Gary! 73 John VE3NFK -- View this message

[Elecraft] K3 default frequency

something in the manual - Thanks in advance John VE3NFK - ps really happy with the K3 and KPA500 and 4 el SteppIR - got K9W W8A S21ZBC and Z81X in the past 10 daysfairly easily... -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-default-frequency-tp7581425.html Sent from

Re: [Elecraft] K3 default frequency

Thanks Don - but no - that did not work : radio on 740 changed to 20 m 14.010 powered off with power switch powered on: 14.010 changed bands down to the '160m' band - 30/40/80 ok on proper frequencies but back to 1.150 on bottom band 73 John VE3NFK- glad i am not losing my mind

Re: [Elecraft] TRX-Manager and the K3--Recent Experience?

(the author) has a K3 and KX3 and therefore is able to test it thoroughly. His latest 5.09 version has the added full interactive panel; as well as all the rest in a main screen. I hope you will enjoy it. 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/TRX

Re: [Elecraft] KPA500 not working - fixed

sorry Gary - would be very happy to tell you if I knew :-) took it out; took cover off; looked; put cover on; reconnected and it worked like it should have. The cutout was ok before and after. 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500

[Elecraft] KPA500 not working

of the frequency; it follows the K3; the K3 is fine; The K3 reports it on/off/standby etc. Hpp :-) thanks 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-not-working-tp7572838.html Sent from the Elecraft mailing list archive

Re: [Elecraft] KPA500 not working - fixed

now working - after removing everything and starting over; it is ok thanks to Rick wa6nhc/7 for his help 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-not-working-tp7572838p7572854.html Sent from the Elecraft mailing list archive

Re: [Elecraft] KPA500 not working - fixed

now working - after removing everything and starting over; it is ok thanks to Rick wa6nhc/7 for his help 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-not-working-tp7572838p7572856.html Sent from the Elecraft mailing list archive

[Elecraft] K3 - DATA mode does not TX

; and tried all the various setting (line levels, CMP, MIC etc) - as I get output with USB; it means that the 'LINE IN' is working in that mode at least. I think my K3 is broken... anything else I can try? thanks 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] K3 - DATA mode does not TX

tnx for the very prompt reply Lyle... I just checked again DATA mode A; main menu Mic SelectLine In and same results - absolutely no power out 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-DATA-mode-does-not-TX-tp7568906p7568910.html

Re: [Elecraft] K3 - DATA mode does not TX

John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-DATA-mode-does-not-TX-tp7568906p7568921.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

Re: [Elecraft] K3 - DATA mode does not TX

thanks for the magic guys... WSPR 10 watts 10 minutes, DATA A mode for the first time: VE3NFK Hearing: HK3DRO, KE7A, W3HH Heard by: HK3DRO, IZ4PSG, KB9AMG, KE7A, KV0S, OE6WSF, ON7KO, TF3LB, UU1CC, VK7DIK, W3HH, WA5ETV, YO9IRF 73 John VE3NFK PS - I'll need to go back to the 1 milliwatt I

[Elecraft] K3 and APRS problem

' and offset corrected to no avail) and different antennas. VERY occasionally ( 1 time out of a 100 or so) - it does make a connection. I must be missing something - because it has worked in the past - but what? Thanks for any new ideas. 73 John VE3NFK -- View this message in context: http

Re: [Elecraft] K3 HRD Ver 6

Just a reminder - TRX-Manager FULLY supports the K3 and KX3 with ALL functions now... including log, cluster, SteppIR, etc (trxmanager.com) A friend and beta tester VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-HRD-Ver-6-tp7567473p7567481.html Sent from

[Elecraft] K3 - sound in problem

missed it) thanks and 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-sound-in-problem-tp7559810.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home

Re: [Elecraft] K3 - sound in problem

Thanks Mike, Jim and Pete all good input and will try them out after work today interesting that there are 2 different ways to achieve a working solution! (DATA-A, USB - making sure Mic select LIN IN and level right) 73 John VE3NFK -- View this message in context: http://elecraft

Re: [Elecraft] K3 - sound in problem

cranked up the CMP to 30 or so Question - 'why' has it worked fine for 'years' and now doesn't ? I can obviously use DATA-A - but I personally preferred not have to switch modes. 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-sound-in-problem

[Elecraft] correction was Re: K3 - sound in problem

sorry - audio output from sound device was '0' - don't know how that happened as I hadn't touched it - but everything is fine again (it was NOT the original problem tho' :-) ) 73 John -- View this message in context:

Re: [Elecraft] P3 freezes up

Does anyone have any info here - or do I need to bother Elecraft support (while they are busy trying to get out the KX3 and hopefully the KAT500) thanks 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-freezes-up-tp7407874p7423541.html Sent from

Re: [Elecraft] K3: Firmware 4.48 release - stable, in use?

seamlessly. I have no financial interest in it. 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Firmware-4-48-release-stable-in-use-tp7417236p7419723.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] P3 freezes up

Hi My P3 - (which has worked fine since I built it) has now decided to 'freeze-up' for no reason... just listening to AM station and noticed display is 'frozen' pwr on/off fixes it. Any ideas please and thank you? 73 John VE3NFK PS connected direct to K3 -- View this message in context

Re: [Elecraft] Rusting screws

Hi I have the stainless steel kit (tho' still not installed and I have no rust) but all these messages about rust led me to remember this: http://www.youtube.com/watch?v=PRKmkybIaqc hope you enjoy - and sorry for the OT... Eric will be closing it soon anyway :-) 73 John VE3NFK -- View

Re: [Elecraft] XG3 cable

Hi Knut I have my new - unused unit on my desk - the cable is in a bag E850369 'Serial Cable Assembly' it is black with a female DB9 connector and miniature headphone type plug on the other end It is about 6' long- good luck - i feel your pain :-) 73 John VE3NFK -- View this message

Re: [Elecraft] XG3 cable

PS - edited to add - there are no names/marking on cable; and 'skytronic' is a brand name for a series of different cables. -- View this message in context: http://elecraft.365791.n2.nabble.com/XG3-cable-tp6841887p6841953.html Sent from the Elecraft mailing list archive at Nabble.com.

[Elecraft] KPA500 hum

VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-hum-tp6685742p6685742.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] KPA500 - 500W out on 120VAC?

VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-500W-out-on-120VAC-tp6673070p6674500.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] KPA500 - SWR

agrees with the LP-100 as to the SWR (much lower than the KPA500) The LP-100 is located AFTER the amp - so it reads the full output power. this holds true on all higher bands. any suggestions please? thanks and 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] Digital software compatibility

TRX-Manager; the author purchased a K3 when it first came out and it has complete control of the rig - including equalizer, STeppIR, etc. I have had no issues. Not 'free', but you can try it out first. I am a beta tester. 73 John VE3NFK -- View this message in context: http://elecraft

Re: [Elecraft] New K3 guide by KE7X

tnx for the summer code - appreciate the savings! (got the download) 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/New-K3-guide-by-KE7X-tp6460659p6476540.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KPA500 Kits

VE3NFK (going down to Maine) -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-Kits-Is-today-the-day-tp6425254p6447189.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] K3 software utility ?

TRX-Manager full control of ALL parameters - resizable trx-manager.com Developer Laurent uses a K3 and keeps it up-to-date with all the firmware revisions. 73 John VE3NFK (beta tester) -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-software-utility

Re: [Elecraft] P3 and continuous 5-15 db 'spike'

Yes, Alan an LP-Pan and yes that is where the spike comes from... I checked Brett's suggestion that the in/out might be backwards.. but it is fine. So - now I need to find out how to stop the leakage. 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com

[Elecraft] P3 and continuous 5-15 db 'spike'

Is it normal to have a 'spike' on frequency all the time ? no antenna, moves off according to CW tone, otherwise on the centre freq line. maybe it is normal? thanks John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-and-continuous-5-15-db-spike

[Elecraft] Now fixed - new question Re: K3 - Hi Cur and no speaker output

back as they are not an 8 or 4 ohm load is it possible that caused the failure? thanks 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-Cur-and-no-speaker-output-tp5552943p5570295.html Sent from the [K3] mailing list archive at Nabble.com

[Elecraft] K3 - Hi Cur and no speaker output

suggestions? Thanks John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-Cur-and-no-speaker-output-tp5552943p5552943.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

Re: [Elecraft] K3 - Hi Cur and no speaker output

Hi Ken no - stereo - and mod done to prevent the short... thanks for the thought... I can plug the speakers into the front phones plug and they work there... 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-Cur-and-no-speaker-output

[Elecraft] P3 - clicking and display jump

Hi New P3 sn 2xx while listening 20 meters, hear 'clicking' from P3 and display jumps up/down from about -120 to -117 and back. intermittent - but more prevalent when there is a sig preamp on or off freq 14005 -14031 sigs S5 -9 any ideas? tnxs 73 John VE3NFK -- View this message

Re: [Elecraft] Clock Accuracy (the moral of the story)

extraordinarily pleased with my radio AND more importantly the excellent response from K3 - I was most impressed to have a tech answer from Wayne himself within minutes as to a 'homebrew' possible adjustment. Cheers to all 73 John VE3NFK -- View this message in context: http://elecraft

Re: [Elecraft] Clock Accuracy

Hi Wayne I'd like to adjust mine - would the cap on the clock chip be worth changing to a trimmer? Clock is slow by 4 MINUTES after 4 months which is bit annoying. Thanks and 73 John VE3NFK -- View this message in context: http://elecraft.365791.n2.nabble.com/Clock-Accuracy

Re: [Elecraft] Clock Accuracy

On 24 June 2010 18:58, wayne burdick [via Elecraft] ml-node+5219950-1392582094-44...@n2.nabble.com wrote: On Jun 24, 2010, at 3:34 PM, VE3NFK wrote: Hi Wayne I'd like to adjust mine - would the cap on the clock chip be worth changing to a trimmer? You could do that. Clock is slow by 4

Re: [Elecraft] K3 KXV3-RXA Mod

Thanks for the replies - and Don, I'll leave it in until I next open the rig _ I haven't noticed any detriment - but there is no point in having them both in. 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3-KXV3-RXA-Mod-tp4873179p4876689.html Sent from the [K3

Re: [Elecraft] K3 KXV3-RXA Mod

weelll I got the new 'a' version AND installed the sticky tape mod is that a problem? thanks 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3-KXV3-RXA-Mod-tp4873179p4874835.html Sent from the [K3] mailing list archive at Nabble.com

[Elecraft] K144XV Doesn't work

) if above is done from 144.390 then with CW, DATA, or CW it switches to 44.390 I thought it was supposed to XVT with 28MHZ per XV1 IF 28 ?? nothing heard with a sig gen either. and of course no power out. Any suggestions please thanks John VE3NFK (the rest of the updates went fine except Synchro

Re: [Elecraft] K144XV Doesn't work

Thanks so much Matt - missed the int I have audios now :-) still doesn't like CW, DATA or AM though. 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K144XV-Doesn-t-work-tp4772885p4772975.html Sent from the [K3] mailing list archive at Nabble.com

Re: [Elecraft] K144XV Doesn't work

soory - hit return by accident .. Hi Matt I checked this suggestion out and all modes are fine on th 10 meter band (28.020) and only FM and USB/LSB on the 2 meters.. if you go to CW/DATA/AM - the frequency drops to 44 MHZ 73 John VE3NFK On 21 March 2010 11:39, Matt Zilmer [via Elecraft] ml

[Elecraft] upgrade order help please

and KXV3A-upgrade ?) K144XV 2 meter module KXV3A upgrade to go with 2 meter module KTCXO3-1 1ppm TCXO KDVR3DVR I look forward to words of wisdom - the sooner I can do it - the sooner I can send my DSP board back for upgrade for someone else waiting!! 73 John VE3NFK -- View

Re: [Elecraft] k144xv logistics information

Hi Just thought I'd let you know I ordered June 19th (2009) and just got off the phone with Elecraft - they are shipping May 2009 orders now so . 73 John VE3NFK -- View this message in context: http://n2.nabble.com/k144xv-logistics-information-tp4579184p4583281.html Sent from the [K3

Re: [Elecraft] The few, the proud, the Beta testers! Free new K3 software.

looks nice - found 'setupkit.dll' with google, vbrun300 was on my system with another obsolete program, and got it running - only to find you have limited it to Com 8... My K3 is on COM 13 good luck 73 John VE3NFK chen dave wrote: hi Don, After D/L, it say need VBRUN300.DLL

Re: [Elecraft] The few, the proud, the Beta testers! Free new K3 software.

Hi Ted Thanks for the comment _ I am ok with com ports (got 14 ! ) but my 1-8 are configured for those items that 'must' be below 9 - not the case with the K3 and the utilities I use with it (TRX-Manager, PowerSDR, Skimmer, K3 Util; and occasional HRD) 73 John VE3NFK 2009/12/5 wp4cw [via

Re: [Elecraft] K3 Beta Firmware Rev. 3.57: Synchronous AM Detection (AM-S); misc. improvements

Hi Wayne This was one of the features that I 'really' wanted in the K3 and I am so pleased it works so well.. Enjoying my SW listening all the more now Thanks! 73 John VE3NFK wayne burdick wrote: K3 beta-test firmware revision 3.57 (with DSP rev. 2.45) is now available

Re: [Elecraft] [K3] K3 Firmware Uploads

; and they work with macs. pc's, and linux boxes. You can 'tweak' and change com ports easily from the device manager. YMMV 73 John VE3NFK J.A. Wolf, MD, K6JW wrote: When I try to upload new firmware, I seem to get frequent failures during the FPF load. This has happened both with 3.44 and 3.52

[Elecraft] K3 DATA question

using MultiPSK - but it makes no difference if it is running or not. (Doesn't do it in USB and CW works normally) What am I missing? Thanks and 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3-DATA-question-tp3925543p3925543.html Sent from the Elecraft mailing list archive

Re: [Elecraft] K3 DATA question

Hi Frank Thanks for the answer - but the text decode is not on - checked that... in fact on 40 meters - it does NOT transmit .. but when I go back to 80 it does - so there must be some setting I am missing... 73 John VE3NFK 2009/10/31 W6NEK [via Elecraft] ml-node+3925574-578908...@n2

Re: [Elecraft] K3 DATA question

Thanks! that was it - set to PSK31 d on 80 m and AFSK on 40 Appreciate the response 73 John VE3NFK Greg - AB7R wrote: Correct but it only works in PSK-D and FSK-D. 73 Greg AB7R -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun

Re: [Elecraft] K3: R-MH2 mic problems

Wow - trying to figure out what this was about thanks for the reply - you might note my email was from 2008 - over a year ago! \ Cheers John VE3NFK 2009/5/10 Don Nesbitt (via Nabble) ml-user+39327-1515648...@n2.nabble.com: Hi John - the front panel message FP.H b1 A5 really is FP. (means

Re: [Elecraft] K3 external speaker

sound more. 73 John VE3NFK I'm using an old car stereo door speaker now. Any one tell me the source for a good speaker for the K3. Any enclosure tips too. k9il K3 #2626 __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] Width of AM filter

in when I reduce BW to 3... low cost - fair bit of labour :-) 73 John VE3NFK Jerry, The WIDTH control sets the final audio bandwidth, which is limited to 5 kHz in AM mode. But in AM mode, the crystal filter bandwidth needed is 2x the audio bandwidth, or 10 kHz in this case, because it has to pass

Re: [Elecraft] Great Customer Service, other company

the address is www.practicaltool.com no s 73 John VE3NFK Alan Price-3 wrote: After many years dealing with Elecraft I have become used to superb customer service. I have built more than 260 K2's, and I mean they have really gone overboard in support. I just ordered a de

[Elecraft] K3- suddenly lost AM sensitivity - bug - partial fix

when going back to AM Note - band changes, K3 on/off; firmware reload did NOT change things. I consider it a 'minor' bug 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3--suddenly-lost-AM-sensitivity---bug---partial-fix-tp2295152p2295152.html Sent from the Elecraft

Re: [Elecraft] Logic 8 redux

Hi Not trying to hijack this - but you could try TRX-Manager which links directly with Logic 8 - has full K3 support and is actually sold in NA by the Logic 8 group. John VE3NFK Gary Smith wrote: Hi, Awhile ago I asked about using Logic 8 with the K3 and there were a few replies. I'm

[Elecraft] Excellent control software TRX-Manager

one himself. Give it a try - it is worth a look for no charge. 73 John VE3NFK -- View this message in context: http://n2.nabble.com/Excellent-control-software--TRX-Manager-tp1688042p1688042.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] K3 with KRX3 Birdie? at 14.27750

Hi I have just noticed an S7 signal at 14.277.50 USB - it is 'clearer' on the main than the sub and antennas disconnected has NO effect... 'sounds' internal - very pure tone... but? in AM it is audible and S4 from 14.2725-14.277. Any comments? thanks John VE3NFK -- View this message

[Elecraft] Of possible interest Announcement - SteppIR FULL control with TRX-Manager

of a comprehensive SteppIR control Interface (STEPPIR protocol). Please see the help for setup (important information to be read). Special thanks to John VE3NFK for testing and Jim @ SteppIR for support. www.trx-manager.com This new addition to TRX gives you full control of the SteppIR - beam and vertical from

Re: [Elecraft] K3: birdie on 50.045?

Nothing heard here SN 709.. 73 John VE3NFK DL5OCD wrote: No, in my case the reveiver is quiet on this frequency. 73 Michael oe9fwv wrote: when I am on 50.045.05 with PRE on I hear a low continuous tone. With PRE off it disappears. When I twist the shift, the tone gets lower

Re: Re:[Elecraft] K3: R-MH2 mic problems

adjusted. Any advice/help comments? tnxs John VE3NFK Gary Hembree wrote: This is a known problem with the Rev B front panel artwork. I had the exact same problem with a MH2 mike when I first used my K3/100 SN 729 a week ago on 6 meters to contact a local friend who is a well-known VHF

[Elecraft] Thanks! was :K3: R-MH2 mic problems

Thanks to Ken and Don - mic is working great - appreciate the extremely rapid replies guys! (a case of missing something in the manual) 73 John VE3NFK PS - what about the second 'weird behaviour'? VE3NFK wrote: Hi I have sn 709 - I have my Heil HC4 from my TS-2000 8 pin conn - when

Re: [Elecraft] K3 with SteppIR

Hi Jim I use the K3 with TRX-Manager and my 4el SteppIR. The K3 is on COM 13 (an FTDI USB-serial adapter) and the SteppIR is 'Synchro' on COM 12 4800 baud. The SteppIR happily follows my K3 around. Disclaimer - I am a Beta tester for TRX. 73 John VE3NFK PS - I know Laurent, the author

[Elecraft] My Katiegram

Hi Lots of 'Katie's today - add mine to the list - ordered Oct 26, kit, 100W, General, 6khz, 400hz and transverter (waiting for 2nd receiver) - told that shipping notice will be in 2-3 weeks 73 John VE3NFK -- View this message in context: http://www.nabble.com/My-Katiegram

Re: [Elecraft] K3 and FSK RTTY

Just an OT note - I am waiting for my K3 - been happy with Navigator for 10? months... AND have it working in Ubuntu Linux - including Simon's PSK31Deluxe under Wine... Cheers and 73 John VE3NFK PS - HRD 'mostly' works too - just one error message that sometimes can be ignored - other