To me, it sounds like that when the ATU is inline (& I presume you let
it tune to that antenna at some point. Yes/No?)
The antenna is better matched to the transmission line, so more of the
on-air "ambient" noise is delivered to the RX.
I get the same here, where 60m is quite noisy anyway.
vvy entrepreneurs
to bring to market.
73,
N8YSZ.
--
Dan Brown
On Sep 14, 2022, at 04:06, Dave B via Elecraft
wrote:
Morning...
Sounds like a job for an Arduino or PIC Micro, to interface between
radio and ATU, and possibly with additional indicators/buttons etc...
ATU on one side (two I/
Morning...
Sounds like a job for an Arduino or PIC Micro, to interface between
radio and ATU, and possibly with additional indicators/buttons etc...
ATU on one side (two I/O lines from the sound of things, with maybe some
voltage level changing) and radio CAT interface on the other on a
I had a KPA500 issue 5 months after purchase. I took out the coil (the heavy
part) and paid for shipping back to the mother ship. They fixed it really fast
and sent back at no charge. Could not be more pleased with their service.
On Monday, August 1, 2022 at 03:52:30 PM EDT, wrote:
Ham terms. No awards, no WAC,
WAB, or whatever. But I can diagnose faults, fix and adapt stuff.
On Sun, Jul 3, 2022 at 7:04 AM Dave B via Elecraft
wrote:
FYI...
Windows users, can use these utilities to find out what is/was
connected
to their PC's by USB etc...
USBview
FYI...
Windows users, can use these utilities to find out what is/was connected
to their PC's by USB etc...
USBview: A Microsoft (was System Internals who MS bought) tool.
The easiest way to find it is here:- https://ftdichip.com/utilities/
"Microsoft USBView - USB Connection Viewer"
There
t! Just a user who knows a
little more than most.
Forwarded Message
Subject:Re: Elecraft Digest, Vol 219, Issue 2
Date: Sat, 2 Jul 2022 12:02:49 +0100
From: Dave B
To: elecraft@mailman.qth.net
Hi.
At the very least, see if the embedded Linux it uses (what ve
Hi.
At the very least, see if the embedded Linux it uses (what version of
what distro, anyone know? I've not seen anything re that mentioned...)
has a firewall facility you can invoke and setup. Even if it is only
possible from the command line. They can have full network
connectivity,
Hello All,
I am selling my K2/100 and KAT100 at Dayton. I don't want to ship
this. I bought this from an estate a few years ago and really haven't
done anything with it. It has options KSB2, KPA100, K160M, KDSP2,
K60XV, KAT100, and an MH2 mic. The serial number is in the 6k range. I
am
Waiting for Elecraft to finally get they supply of Kyber Crystal's. Cannot
wait to see Wayne demonstrating the mini light Saber at Dayton this year. Will
finally be able to remotely eliminate the equipment of the "tuner uppers"
during nets.
Way to go Master council member Madolyn, masters
I heard that one of the major competitors is working on TSFoldDX mode.
They fold space and time so that you can just talk to the DX face to
face and hand the QSL card over in person. Sadly, that was put on hold
due to Covid concerns.
They had it working briefly about 10 years ago, but the
Oct to early May. Had 11 days below -65F ... when it finally warmed up
to -30F, it felt like field jacket wx rather than parkas.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 10/4/2021 4:17 PM, Ken B wrote:
Well you have not been to Hell Michigan. I can 10
Well you have not been to Hell Michigan. I can 100% confirm it freezes over
yearly
Sent from Yahoo Mail on Android
On Mon, Oct 4, 2021 at 7:10 PM, jerry wrote: On 2021-10-04
15:12, Skip Jensen wrote:
> I would put an LiPoly inside one of my radios right after it has been
> reliably
> Dave and all,
>
> Placing the fuse near the power supply end is the way to do it.
> In the event of a short, the power wire can spew metal and start a fire.
> Always fuse near the power supply.? A fuse at the equipment end will
> only protect the equipment, but will expose the wire from the
If anyone thinks a "New" PC out of the box, is "secure"?
Think again, they are far from secure, unless you spend several hours
disabling a lot of "phone home" & auto update facilities in all the
pre-installed (and usually unwanted) crap-ware (sometimes including
parts of the OS itself) that
Anyone have a SP3 they would like to sell?
Thanks
Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I have read the Elecraft K3s manual, K3 manual, Expert 2K manual.. realize that
I need to try to use db9..(RJ45) and have been told to use a Y connector (using
the y connector I purchased from Elecraft for P3 display but I don’t use it)..
and connect only two wires to Expert (ground and RXD-
Should be easy to gauge...
How "clean" (or otherwise) is his signal on your RX, with no antenna
connected, and all the RX attenuation switched in.
Perhaps also fit a well screened dummy load to the rig's antenna port(s)
Also disconnecting just about everything else except the power (and put
Its affecting everything - Tried to by a bunch of 555 timing chips for the
local troops scouting project - none around, glad we don't need them till
November.
On Thursday, April 29, 2021, 04:50:57 PM EDT, Wayne Burdick
wrote:
Many off-the-shelf parts are affected as well.
Wayne
Re:-
> Subject: Re: [Elecraft] How and How Often to Clean KPA-1500 Cooling
> Systems?
> Message-ID:
>
>
>
> Content-Type: text/plain; charset="Windows-1252"
>
> As you know, I run my amp in a single amp,
Sadly Andy, as you can see below, the list machinery already shows your
email address anyway.
If you want privacy, use a different email address for public, and
private stuff. Oh, and avoid services like MSN.
73.
Dave G0WBX/G8KBV from my googlemail account (I have at least two others,
one I do
Following with great interest - as have a similar issue
On Tuesday, January 26, 2021, 11:24:41 AM EST, Joseph Shuman via Elecraft
wrote:
I have severe high-frequency hearing loss, up to 85 dB at 6-8KHz and 60 dB at
3-4KHz. Lower than that my hearing is close to normal for my age. I
For a fraction of the price of one of those Amazon things ($60 US, of
unknown repute and support.)
You could buy one of the old Lynksys Blue/Grey WRT54G routers (Well
known with lots of free expertise "out there") and re-configure it to
work as a WiFi/Wired LAN Bridge.
Generally rock solid
Wayne can you please reshare the news letter. My old eyes appear to have
missed it
Thanks Ken
Sent from Yahoo Mail on Android
On Mon, Jan 18, 2021 at 11:58 AM, Wayne Burdick wrote:
Either I post here or start a blog :)
(Seriously, as fun distractions go, I vote for our newsletter
week. The 22nd.
Grant NQ5T
Sent from my iPhone
> On Jan 13, 2021, at 6:50 PM, Ken B via Elecraft
> wrote:
>
> What meeting on Friday ?
>
> On Wednesday, January 13, 2021, 05:47:36 PM EST, Paul Van Dyke
> wrote:
>
> I would say that is a question for the Zo
What meeting on Friday ?
On Wednesday, January 13, 2021, 05:47:36 PM EST, Paul Van Dyke
wrote:
I would say that is a question for the Zoom meeting Friday
Paul Van Dyke KB9AVO
On Wed, Jan 13, 2021 at 11:55 AM w4sc wrote:
> Has estimated date of K4HD availability been revealed?
Hi.
I'm seeing strangeness between the command values used to set the AF
Gain, and what is returned when you query it, even using the KX3 utility
software (v1.2.12.21)
The front panel control range is 0 to 60. The values returned when
querying the radio follow that just fine as you query it
Hi.
Decided to update the KX3. (Having also just updated the XG3Util
software, and found that device was up-to-date.)
Downloaded the current kx3util software (Linux x86 version) from the
Elecraft site, and got that "installed" such as it is.
Comm's established with the radio via genuine
Well, RF (AKA "Radio Waves") can falsely trigger all sorts of equipment
that was not "designed" to work with, or be influenced by them.
That is the classic EMC Susceptibility or Immunity problem. Basically,
poor design and/or implementation of the affected (or sometimes bad
installation of an
I am thinking of recessing some LEDs in the table in front of the equipment
for low light operation and trying to decide what color would be best.
Thank you Ken WB8PKK
On Friday, October 16, 2020, 10:18:48 AM EDT, Rich NE1EE
<73.de.ne...@gmail.com> wrote:
Another way to roll your own
Why do you use red and not blue or green
Sent from Yahoo Mail on Android
On Fri, Oct 16, 2020 at 9:18 AM, Rich NE1EE<73.de.ne...@gmail.com> wrote: I
just looked at my keychain light. Says Night Reader by David Chandler Company
Good afternoon - Did anything get posted
On Thursday, October 8, 2020, 02:18:57 PM EDT, Tom Doligalski via Elecraft
wrote:
Just got off the phone with Eric. The K4 is steadily shipping, and they are
working diligently to get through the huge numbers of orders.The company is in
Good afternoon Eric
Wayne mentioned there would be an update on shipping of the fully paid units.
Would you be able top please give a "cracked Crystal Ball" estimate to the USA?
Thank you Ken WB8PKK
__
Elecraft mailing list
Home:
lifier" systems are also often used in other cases, where a
clean low power class A amp in effect "corrects" the output of a much
more powerful, more efficient but not as linear (class B) amplifier by
means of a combiner, dynamically adding or subtracting "signal" as
ne
I as well have a K4 on deposit and think a "get it working" 5-10 page
instruction would be really nice, as well as a searchable complete manual.
Guessing youtube videos will come with time just as it did on the K3. Can
hardly wait for the K4 - maybe a surprise under the tree.
Thank you Ken
Totally agree.
Sent from Yahoo Mail on Android
On Fri, Jul 31, 2020 at 11:55 AM, Paul Gacek via
Elecraft wrote: Maybe but I have to imagine that
the recent past has been rough and tough for Elecraft on many fronts.
I for one will be thrilled just to receive my K4 and happy to pay the
Hi.
I would not trust a Bird 43 or similar meter for any "Measurements"
whatsoever.
Especially if you cannot prove that the slugs and meter body were
calibrated together.
They are notoriously inaccurate, but are good for quick "power presence"
indications, and "ball bark" VSWR checks.
I
After further thought at lunch I realize that I did replace both sockets. I
still remember getting them unsoldered. My other unrelated comment is that I
hope the lessons learned from the K3 will make it into the K4 and that the K4
whenever it appears. Barney K3LA
-Original Message-
Both would work.
Sketch out the equivalent circuit and you'll see why.
As to using a TRS or TS 1/8th (3.5mm) plug, you'll have to consult the
radio's manual to see exactly what's connected to the tip and ring, and
if the sleeve is actually connected directly to the chassis, not via a
convoluted
A question best asked on the WSJTx support list, where the developers
hang out..
https://wsjtx.groups.io/g/main
There are plenty of people there using K3's etc.
In any case, it may be more of a Hamlib issue, than WSJTx, and there is
"lots" of work going on at the moment with Hamlib.
73.
The original poster wants something aesthetically acceptable but performing
as well as possible within those limits, whatever they might be. He didn't
say it has to be a solution available over the counter. He doesn't say that
experimentation is unacceptable. So I suggest that he first construct a
Try a plastic Owl, Hawk, or other dummy predator mounted on the near the
antenna, but in full view..
It too, may detune things a bit if mounted on it, but at least it'll be
there all the time!...
73.
Dave G0WBX.
On 07/06/2020 18:29, elecraft-requ...@mailman.qth.net wrote:
> From: Andy Durbin
John, I have been using my K3 (sometimes together with my second one) for FD
at 100W for many years with excellent results. The power source is
pre-charged lead acid batteries which we change as needed. Sometimes the
battery in use is assisted by an ancient solar panel that probably doesn't
50 lashes with a wet noodle to the person sitting in the big chair. You
missed WB8PKK
Sent from Yahoo Mail on Android
On Mon, May 11, 2020 at 11:39 AM, Steve Hall<99sun...@gmail.com> wrote:
Thanks to all that participated and those relaying.
We meet each Sunday at 1800Z, 7280 KHz.
WM6P
I second the suggestion that RX EQ be separate for left and right sides.
Almost a year ago I was diagnosed with a severe hearing problem on the L ear
only, where some high freqencies are exaggerated but the normal speech
frequency range is severely attenuated. When people speak into my L ear, I
I want to experiment using my UR5CDX CT 755 single paddle keyer as a cootie. I
understand that this can be done by fitting a mono adapter jack on the end of
the (stereo) keyer cable jack and plugging it into the K3 "Key" port. I seem to
recall reading a caution concerning the use of mono and
The question was more an understanding of the reasoning, which you answered,
rather than a request, since other manufacturers include such faces. Just
thinking, if auto makers included bar graphs they could fit more on a given
screen but might take our eyes off the road longer. Enough of these
Hi Folks,
I was looking at the information on the Elecraft website regarding the K4
and its features and functions and either missed or could not find any
reference to a couple of items I wanted to know about. Specifically, I was
looking for confirmation of, or mention of, if the K4 has the same
Anxiously awaiting it. There was promises of more and frequent conversation
unless I am mistaken. I paid for it in full and am not going to cancel it but
would like more information
Thank youWB8PKK
Sent from Yahoo Mail on Android
On Sun, Apr 19, 2020 at 1:09 PM, Doug Turnbull wrote:
Good evening
Quick Q - is there a rough ETA when the VHF module will be ready for the K4.
Thank you Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi, I'm an OM from Udine, northern Italy. I own a K3 and I noticed that
changing the mode from Usb to Lsb the audio tone varies slightly. It's
normal? The five-pole filter has the center frequency set correctly as per
the label. Is it possible to vary the carrier frequency of the sidebands?
Hi Jerry.
The first thing to check, is if the "noise" is from your own stuff, or
outside you immediate control.
You can do that easily, by running the rig from batteries (internal or
external) and turning the house off at the main incoming switch.
If the noise level drop's significantly, then
If this posting is not allowed please feel free to delete it.
Our local club has been asked to present an introduction to ham radio for a
couple of local youth organizations. We are planning a number of hands on
activities and need help with people talking back to the kids. It would be
great
My Prediction
Eric will mention that all prepaid K4's have been shipped.
Ken WB8PKK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm somewhat surprised Elecraft don't just flip that relay into the
"protect" position whenever the radio Transmits.
Or at least have a menu option for that relay's behaviour, that defaults
to the "Safe" situation (RX made "Safe" during TX.) But if you really
do need to, able to be set so the RX
Sorry, just noticed from the KX3 companion website, that I/Q input is
not needed, just the audio output (via an attenuator into the tablet's
mic input) the waterfall it shows is just the recovered AF bandwidth,
not like other tools. But that will need a 1:2 audio
splitter/attenuator, so you can
I have been really really good this year, you can even ask the smart one of the
family. Will there be a K4 gift under the tree
Thanks sad looking puppy dog eyes Ken. WB8PKK
__
Elecraft mailing list
Home:
A personal account
I did up front pay for a K4 based on the customer service, quality, and a
recommendation of N1MGO. This type of attention to detail and service is
unheard of these days
Ken. WB8PKK
Sent from Yahoo Mail on Android
On Wed, Dec 11, 2019 at 3:09 PM, Joseph Street wrote:
I am thinning my collection of sound cards, all high-quality units in great
condition, suitable for digital modes: ASUS Xonar U7 (USB, 2 units, $50
each, plus shipping), Tascam US-100 (USB, 1 unit, $50 plus shipping),
M-Audio Audiophile 2496 (1 unit, PCI internal card, includes MIDI, $35 plus
Dear Santa a Christmas package would be oh so nice. Even if it required
several firmware updates after
Sent from Yahoo Mail on Android
On Thu, Nov 21, 2019 at 3:16 PM, Tox wrote: Eric
also presented on it at Pacificon a month ago. While I would love
some good news tonight, I'm kinda
Any persistent lubrication.
"Copper slip" graphite grease, whatever. Stainless is not ideal in an
outside situation where dirt can over time get into the threads, that
then result in the metal "galling" (partial seizing/self welding) when
you try to move it.
Regular BZP or Galvanised types
Any update on delivery dates
Thank you Ken WB8PKK
Sent from Yahoo Mail on Android
On Thu, Oct 17, 2019 at 11:32 PM, Eric Swartz WA6HHQ -
Elecraft wrote: Hi Tom,
I apologize for any confusion on K4 status. We really appreciate the support
you and others have given us with your K4
I am unable to get the Text Decode function on my K3 to produce accurate
results. I have employed the tweaks suggested in the K3 manual, but the text
produced bears little resemblance to the code that was sent.
Ordinarily I would ascribe a problem like this to operator error - but I don’t
t;> On 10/3/2019 5:25 PM, Ken B via Elecraft wrote:
>> Now to somehow convince the CFO and chief cookie counter
>
> Get her interested in sewing machines or looms. I NEVER have to ask my XYL
> about buying
I just had an excellent call with Bruce from Elecraft service. While
discussing the issue with my KPA500 we also drifted into the K4.
That sounds like the perfect radio for myself. Now to somehow convince the CFO
and chief cookie counter
Hi.
The KX3 Utility Rev 1.18.7.3 (the Linux version* at least) does have a
"Set KX3 Time" function, under the "Configuration" tab.
Perhaps there is a later rev utility for your system OS, than you have
at the moment?
73.
Dave G0WBX.
(* Running the x86 version on Mint 19.2 64 bit, with all the
Speculation mode engaged.
For one thing, if a USB Hub functionality was also built in, you then
only need one physical USB connection between radio and computer, and
you could have full Rig Control, + USB Audio I/O, a well as the usual
KX3 utility functionality (firmware updates etc.)
Ideally, a
that
> difficult.
>
> Bill
> 920-421-1172
>
>
> *From:* elecraft-boun...@mailman.qth.net
> on behalf of Dave B via Elecraft
>
> *Sent:* Thursday, August 1, 2019 4:15:01 AM
> *To:* elecraft@mailm
Re:-
If your radio computers must be connected to the internet, as mine are for DX
clusters, Club Log, firmware updates, etc., etc., then this may not be a good
idea, since older systems are targets for malware. When MS stops supplying
security patches, the situation will become even worse.
This is a text mode list, so it would I think need more than a casual
change to accommodate images or attachments.
However... There is nothing to stop you from posting images to your
favourite photo sharing site (such as, but not only photobucket) then
(most importantly) making it publicly
Easy way out of this mess, if a little expensive...
A big PSU dedicated to the rig(s), implementing "Remote Sensing" so at a
distribution point close to the radio(s) the DC voltage is held
constant, irrespective of the cable length from the PSU.
This power supply should have a proper overload
proof. Educate the users
first. If nothing else, listen to the "Security Now" podcasts by your
countrymen. https://twit.tv/sn (Another episode later today.)
Entertaining, and you might get an appreciation of just how much mayhem
is going on out there right now.
Happy Days!
Dave B G0WBX.
U's for "non industrial" use are
largely outlawed over here for such high power applications these days.
Regards.
Dave B G0WBX.
--
Created on and sent from a Unix like PC running and using free and open source
software.
::
__
Elecraf
Hi Folks,
Thanks to all for the response to my question. While I do not intend to
upload the configuration of one K3 to another, I do want to have the MENU
and CONFIG information pulled from the radio.
It appears that Win4K3suite will do this and I have downloaded the 30 day
free trial version
Hi Folks,
I have been trying to find a way to "dump" or list out all the settings in
my K3s for the MENU options as well as the settings for the CONFIG options
without going through the front panel display and writing them all down.
The reason is to be able to make the same settings on
If it's just a need for one bit of software, to send the same command to
two devices at the same time. Just parallel wire some connectors together.
One Serial OUTPUT, will usually drive two INPUT's without issue. All
you need is the TXD wired to two RXD's, and the corresponding
ground/common
I have 2 Astrons and they are great supplies. On both replaced the caps and all
was very quiet
Ken WB8PKK
Sent from Yahoo Mail on Android
On Mon, Feb 25, 2019 at 8:04 PM, h...@optilink.us wrote:
Filter caps bad? AC on the DC supply side maybe? A well made linear supply
does not make
Good evening all
I am truly amazed at the quality of Customer Service I just received. It takes
a lot to impress me, Doug and crew did a fantastic job helping to trouble shoot
a potential newby configuration issue. The Disney company does fantastic
customer service trainings for all their
I am completely satisifed with anything shipped from Elecraft.
Sent from Yahoo Mail on
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Rose
Sent: Wednesday, January 2, 2019 9:41 AM
To: Elecraft Reflector
Subject: [Elecraft] OT: USPS mailing
I've been making
a tune and should break the key line causing the
KPA to drop out of transmit. KB>>> Did not occur - kept output of 480 Watts
From: Jack Brindle
To: Ken B
Cc: "elecraft@mailman.qth.net"
Sent: Sunday, December 30, 2018 9:53 PM
Subject: Re: [Elecraft] KAT500/KPA500 wi
d with the KAT working properly when I change bands
Thank you Ken
From: Jack Brindle
To: Ken B
Cc: "elecraft@mailman.qth.net"
Sent: Sunday, December 30, 2018 8:28 PM
Subject: Re: [Elecraft] KAT500/KPA500 with Icom 7600 accessory cable
Great! Thanks for the detail. Table
Thank you Jack
Will do it all today. Sunday after church and evening we preparing for the
charity meal. We served 581 people and was to wiped to do anything yesterday.
Thank you Ken KC1ICN
From: Jack Brindle
To: Ken B
Cc: "elecraft@mailman.qth.net"
Sent: Sunday, Decembe
Thank you Jack
Sorry for the delay was helping to prepare for todays town wide charity dinner,
where we typically feed 4-500 people
Will check when I get back home later today.
From: Jack Brindle
To: Ken B
Cc: "elecraft@mailman.qth.net"
Sent: Sunday, December 30, 20
Thank you - I followed Fig 3 on page 10 which is specific to ICOM. Yes all
cables ohm'd out with no shorts
From: Jack Brindle
To: Ken B
Cc: "elecraft@mailman.qth.net"
Sent: Sunday, December 30, 2018 8:28 PM
Subject: Re: [Elecraft] KAT500/KPA500 with Icom 7600 acces
/30/2018 4:13 PM, Ken B via Elecraft wrote:
> Good evening The Icom IC-7600 KAT500, and KPA500 are each grounded to a
> single terminal strip with a #10 cable directly to a ground rod 15 ft away.
> The rod is 12 ft deep. Both the KAP and KTA were factory built as my
> soldering
disruptingoperations on band change. The
question would be what is connected to ground that should not be, and where?Are
the KPA and KATs kits or did they come assembled?
73!Jack, W6FB
On Dec 30, 2018, at 2:22 PM, Ken B wrote:
Please allow me to clairify. Everyone deserves time off. I work 60
what
is going on from this information and hopefully get a good solution for you
quickly.
73!
Jack, W6FB
Elecraft Engineering
> On Dec 30, 2018, at 1:55 PM, Ken B via Elecraft
> wrote:
>
> Thanks for the suggestion
> Sorry for the delay the wife and I went out. The only way I
will compute the SWR and if it is below 1.5, it will go
into bypass - no tuning is necessary.
Is it possible that either one of those conditions exist?
73,
Don W3FPR
On 12/30/2018 6:12 AM, Ken B wrote:
> Yes from the 7600 accessory 1 pin 3 to the kat500
>
> Sent from Yahoo Mail on Andr
.
73,
Don W3FPR
On 12/29/2018 10:13 PM, Ken B wrote:
> Thank you Don.
> The pin 3 (send) did the trick perfectly. Now it works at 300 to 400
> watts out with 20 in. The problem i have now is when i switch bands
> the kat will not tune unless i remove all AC power from the amp.
>
et
the proper cable, it will integrate better with your Icom, but the basic
cabling will get you on the air with your new toys.
73,
Don W3FPR
On 12/27/2018 11:14 PM, Ken B via Elecraft wrote:
> Just received my the kap500 and found out it was missing the accessory cable
> which goes from t
Just received my the kap500 and found out it was missing the accessory cable
which goes from the icom 7600 to the kat500. Elecraft is sending one but it
might take a week. In the mean time does anyone have the accessory pin outs to
rca plug so i can make one and use my new toy.
Thank
Hi Rose and Ken,
Happy Holidays from Amsterdam!!
88/73
Peter PD1RP
Op za 22 dec. 2018 om 22:25 schreef Rose
> Ken and I want to send each of you our best
> Holiday wishes.
>
> Merry Christmas!
>
> 88 / 73
>
> Rose (N7HKW) / Ken (K0PP)
>
Right..
Not exactly the usual done thing, answering ones own question, but here
goes...
~ ~ ~
I had previously performed:-
$ sudo apt-add-architecture i386
as recommended elsewhere. However that was not enough.
I found I also needed:-
$ sudo apt install ia32-libs-multiarch
That
Hi.
On Linux Mint 19, 64 bit.
Have the 32 bit compatibility tools installed, but neither the XG3 or
KX3 Utilities will launch, both complaining about
dave@dave-HP-Compaq-8200-Elite-USDT-PC:~/Elecraft/xg3util_1_13_6_4$
./xg3util
Failed to find/load Framework library
I've not checked in detail what PTT inhibit the KX3 has, but I have
tripped it up on one occasion in the past, but I forget how how I
un-tripped it!
Certainly in some circumstances an external "interlock loop" could be
useful to have, or a key switch on the front!
On my TS870s, Menu 27 set to
You might as well say, why use an OS that was originally designed to run
on 16 bit hardware.
Like Windows (and I'm /not/ a MS fan) Meinberg (and others including
NTP/NTPD itself) have moved on along with the times.
It's the NTP protocol handling that's important, not the GUI you see.
But by
In that case, just change the default time server that Windows is trying
to use, to pool.ntp.org (works anywhere in the world you have
reliable* internet.)
Or.. north-america.pool.ntp.org If you're in the USA.
See https://www.pool.ntp.org/zone/north-america and
You could always create something in Python, to have the computer read
and save the current rig settings you will alter, then invoke whatever
digimode software you use, then restore those radio settings to "normal"
after you've done.
There's lots of info out there regarding how to use serial
73 Alan
> On 27 Sep 2018, at 18:43, elecraft-requ...@mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a
A better way, perhaps...
Leave DHCP enabled in the PA and any other equipment, but make a written
note of the PA's LAN port MAC address. (And that of any other LAN
connected device you have.)
In your router (or other DHCP providing gadget) look in it's setup for
"address reservation" or similar
1 - 100 of 504 matches
Mail list logo