If primary power line carrying noise, you are gonna pick it up well with
parallel wire antenna. Maybe less intense if grounded quarter wave vs.
self-resonant ungrounded half wave?
73, Mike AC5P
On Saturday, March 11, 2017 10:44 AM, Fred C. Jensen <k6...@foothill.net>
Alternate standard frequencies for REFCAL
73 de AC5P/Mike
Disply Wiki Entry
|
|
|
| ||
|
|
|
| |
Disply Wiki Entry
| |
|
|
On Tuesday, February 21, 2017 10:43 AM, brian <als...@comcast.net> wrote:
https://www.nist.gov/pm
Would someone share the dimensions of assembled K3/s box as it comes from
factory? Am guessing it comes with surround Styrofoam?
Mike AC5P
On Sunday, February 19, 2017 2:40 PM, Doug Renwick <ve...@sasktel.net>
wrote:
I make my own shipping boxes. I describe my procedure below
You can also use CHU for frequency standard calibration check depending on
propagation.
3330.000, 7850.000, and 14670.000kHz
73, Mike AC5P
On Saturday, February 11, 2017 12:20 PM, John Stengrevics
<jstengrev...@comcast.net> wrote:
Thanks all for the comments.
I think I will
, Mike AC5P
On Monday, January 23, 2017 11:01 AM, Joe W2KJ <w...@bellsouth.net> wrote:
Howdy Gang:
Checked the KX3 manual but was unable to find the audio output impedance of the
KX3, i.e., what impedance headphones/speaker should I be using on the rig?
I’m looking to buy a light
Anyone have a K2 close to serial 6900 that can tell me mo/yr purchased?
Tried email to sales without response.Thanks,
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Is KX2 somehow restricted to the KXBT2, 11V (3 cell?) battery pack? I cant
find DC input voltage range listed in the specifications on the Elecraft
website.
Thanks,
Mike AC5P
On Wednesday, June 1, 2016 3:54 PM, Phil Wheeler <w...@socal.rr.com> wrote:
Hi, Phil --
Wel
breaker, but NO info on the type
operating curve, or current vs. time for minimum trip?
I have a 10A circuit breaker on my 40Ahr battery supply and it has never
tripped. It is a thermal time delay like most house breakers.
Anyone out there have any clue? Wayne?
Mike AC5P
On Monday, May
Yes, but David says, "only occurs on 20M", so this may not hear it at 135MHz?
Need portable like KX3 and small mag loop tuned to 20M.
On Saturday, January 23, 2016 2:14 PM, Bob McGraw K4TAX
wrote:
If one is serious about finding noise, I've found this item to go
than 50dB with
above variables is the question? Can someone share these figures?
73,Mike AC5P
On Wednesday, December 30, 2015 6:39 PM, Don Wilhelm <w3...@embarqmail.com>
wrote:
I think it is time to change the subject line (and I did). The original
question was about inc
and 100W.
Mike AC5P
On Tuesday, December 29, 2015 8:58 AM, Juliean Galak <jga...@gmail.com>
wrote:
I'm contemplating using a battery rather than a power supply to run a K3s and
am wondering how well it does on 12V (as opposed to the 13.8V most supplies
deliver). Comments appre
I have an older K3 and a spare speaker (part #E850300). Its hard to imagine
flange being bent with little 4-40 screws, BUT, in my assembly manual p52, last
step above Figure 74,it states in BOLD lettering, "Do not tighten the screws
enough to bend the speaker flanges!"
IF this were not an
Sounds good and like maybe a peak on CW pitch around 550Hz? Have you varied
the sidetone pitch at a fixed level to check response?
Mike AC5P
On Friday, November 6, 2015 3:27 PM, Steve Ellington <steven...@gmail.com>
wrote:
I just did a little video on the SP3.
If voltage is being checked via the K3 display, I believe there is a series
diode before the internal metering that adds a 0.6V drop in TX?
73, Mike AC5P
On Monday, October 26, 2015 5:08 PM, Bill Frantz <fra...@pwpconsult.com>
wrote:
Perhaps it's vanity, but I like runn
s has
outperformed anyexternal speaker or headphones I have used for CW.One of
these days should be able to compare to K3S, but I would bet on my deflector
first.Never heard any spurious vibration/whine.
Mike AC5P
On Thursday, October 22, 2015 12:36 PM, Vic Rosenthal 4X6GP/K2VCO
&
Am trying to determine when friend of mine, W7FG began advertising "True
Ladder Line" in QST magazine? Believe this to be in the 1995-2000 time
frame.Would anyone have easy access to QST magazines between '95 and '00?
Tried the online ARRL web archives but NO luck on tracking
Hard to imagine the big ugly(IMO) hex key being "too light" to stay in place?
It must be due to poor surface contact with the bottom of the foot pads. The
suggested methods should work well as should small squares of double faced
mounting tape under the pads.
Jerry's (AE4PB) post and others suggest new speaker is actually made in the
USA. Is that true??
Mike AC5P
On Monday, September 14, 2015 10:34 AM, "ae...@carolinaheli.com"
<ae...@carolinaheli.com> wrote:
I believe when you consider the engineering reputa
the noise.
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Curious if anyone on list has done precision frequency measurement with K3 per
method described in current April issue of QST, page 37?
Thanks,
Mike, AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
audio
output is fine on the internal speaker. Anyone reading had this issue? Any
ideas?
73,
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Question? Is this speaker as sensitive for CW side tones as the internal one?
Mike
AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
of the internal speaker. A 2
inch PVC elbow (painted black) does this nicely.
Mike
AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I have a pair of Direct Sound EX-29 headphones surplus to my needs. Low
hours use, condition excellent.
more info here http://www.extremeheadphones.com/products/ex-29-headphones
Asking $75 plus $10 postage.
73, Mike AC5P
less than $50?
73, Mike/ac5p
From: Don Wilhelm w3...@embarqmail.com
To: Charlie T, K3ICH pin...@erols.com; elecraft@mailman.qth.net
Sent: Wednesday, December 11, 2013 8:00 AM
Subject: Re: [Elecraft] K3 Powerpole Replacement
Charlie,
The PowerWerx crimper
What is U-shaped area in the connector body? I see replies with guys using
200-300W irons!
Not seen that high of wattage with tip small enough to fit into slot of body
with holes in it?
My 100 watt (1/4 tapered flat tip) iron seems to work well there. We had a
demo at ham club meeting a
by external battery?
thanks,
Mike/ac5p
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
, and isolated from ac power surges. I can operate rig
for several hours a day and have had no problems with high/low voltage.
73
Mike/AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
ranges.
73, Mike AC5p
From: Jim Brown j...@audiosystemsgroup.com
To: elecraft@mailman.qth.net
Sent: Tue, April 23, 2013 1:25:28 PM
Subject: Re: [Elecraft] K3 Speaker, Season finale
On 4/23/2013 11:15 AM, Wayne Burdick wrote:
The speaker selected has extremely
Has anyone measured or know the AF output impedance or that of the internal
stock speaker at sidetone freqs? I'm still looking for an external speaker
that can match or better the efficency of the stock one at 700Hz sidetone with
60 deg. deflector. Ditto with headphones.
Mike, AC5P
application.
73, Mike/ac5p
--- On Mon, 4/2/12, Wayne Burdick n...@elecraft.com wrote:
From: Wayne Burdick n...@elecraft.com
Subject: Re: [Elecraft] For the CW OPS
To: k...@att.net
Cc: Elecraft Reflector elecraft@mailman.qth.net
Date: Monday, April 2, 2012, 10:12 AM
April Fool's.
But what
it works, you can spray it gray for a closer color match.
73, Mike/ac5p
--- On Thu, 3/15/12, Don Baucom k4...@comcast.net wrote:
From: Don Baucom k4...@comcast.net
Subject: [Elecraft] K2 External Speaker
To: elecraft@mailman.qth.net
Date: Thursday, March 15, 2012, 11:50 AM
Any suggestions
A local buddy is letting me check out his K2. This one has an open hole on
each side panel about an inch down from top and 5 inches back from front.
They appear original as they have paint inside.
Are these holes normal and do they have a function?
Mike/ac5p
Has anyone actually measured the RF output at the lowest setting of the pot?
My display stops at 0.100 watt but this is before the end of pot travel. Just
curious if minimum output is fixed at 100 milliwatts or goes lower?
Mike, AC5P
One could also cut some easy to see peal and stick tape strips and put on the
stock buttons detailing as desired.
--- On Fri, 1/20/12, Ed Muns w...@msn.com wrote:
From: Ed Muns w...@msn.com
Subject: [Elecraft] KPA500 Key Cap Color
To: elecraft@mailman.qth.net, elecraft...@yahoogroups.com
Just curious if anyone has discovered a passive external speaker more efficient
than the internal stock speaker with a deflector for CW and side tone use? I
have not.
Mike/AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net
and operating time available from
the battery.
73, Mike AC5P
--- On Fri, 6/10/11, Fred Jensen k6...@foothill.net wrote:
From: Fred Jensen k6...@foothill.net
Subject: [Elecraft] K2 Low Voltage Cutout
To: Elecraft Reflector elecraft@mailman.qth.net
Date: Friday, June 10, 2011, 11:02 PM
I
Have not seen a post since Saturday. Can someone let me know if this makes the
reflector? Not sure why or how I got dropped.
Thanks
Mike ACC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Thanks to all that replied. Same thing happened to another user with same ISP
email adr.
I'll work direct with those who gave me some leads to track.
Hoping to receive the list again soon.
Mike AC5P
__
Elecraft mailing list
Home
Yellow top gell cell battery
with float charger. Very well filtered!
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
efficiency of the unit.
Just saw the inside photos yesterday and that big current transformer is a
beauty.
Mike, AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I would like to correspond with anyone who has successfully installed the K3
extended side panels made by Sayers machine shop.
Thanks,
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Has anyone had dealings with Saylors Machine Shop and ordered the extended
sides
for the K3?
My email to David Saylors bounced, and a phone call got rerouted to a different
business answering machine.
Mike AC5P
__
Elecraft mailing
engraving. Anyone
already done this?
Mike AC5P
From: Gary K9GS garyk...@wi.rr.com
To: elecraft@mailman.qth.net
Sent: Sun, April 3, 2011 9:14:54 AM
Subject: Re: [Elecraft] [K2] Hardened K2 for HFPack?
Not that I have an interest in buying one for my K3
. set to FINE, it will display the to
nearest Hertz and you can see how close you got the reference oscillator. AM
signals will sound good when the tuned frequency (USB) matches the carrier
frequency.
73, Mike AC5P
From: jrstorms jrsto...@hotmail.com
Other than the 49MHz REF OSC, what hardware determines or effects the frequency
accuracy and stability in the K3?
Thanks and 73,
Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
the need?
Just because its there and something the import rigs dont have?
Mike AC5P
From: Rick Stealey rstea...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Sun, March 20, 2011 9:45:59 AM
Subject: Re: [Elecraft] Installed K3EXREF
Excellent posting
in the sound output detected. Next is to spray the coupler Rust-oleum
Semi-flat Black enamel to more
match the K3. May even detail more with a grill cloth later. Nice simple
sound improvement out of the stock speaker.
73, Mike, AC5P
functional again.
Thanks and 73,
Mike/AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Ah yes, that is the trick...Thanks to all who responded. Great list.
73, Mike/AC5P
From: Helmut Berka helmut.be...@t-online.de
To: a...@sbcglobal.net
Sent: Mon, March 14, 2011 11:39:02 AM
Subject: Re: [Elecraft] No ATU on K3
Dera Mike,
did you turn off
51 matches
Mail list logo