is from 1/30/11.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Dick Bingham
Sent: Thursday, May 2, 2024 02:16
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA500 Failure
-- An update on my KPA500 failure --
I extracted the amplifier/LPF
the KX3, KX2 and now the KH1. All superior QRP rigs to the K1.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Paul Van Dyke
Sent: Sunday, April 28, 2024 23:58
To: Paul Huff
Cc: Elecraft Email List
Subject: Re: [Elecraft] K1 high demand...
Since I
Hello Pierre,
There is no procedure. It is programed in the radio's firmware.
All Elecraft radio's do this.
You can contact support about getting the K2 firmware programmed specifically
for the Thailand amateur bands. They probably have dealt with this before.
73,
Mark, WB9CIF
-Original
on 40M (which has an
external
antenna tuner) and 20M which has a resonant antenna.
Suggestions?
Mark. N2QT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
as if they
were at the remote site.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of David Gilbert
Sent: Thursday, December 14, 2023 17:44
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Remote Lives and Breathes!
I thought that what people
Hi Pete,
The gold pins did not appear as part of production until somewhere around
serial #4100.
I had K3 Serial #3505 and had to have the front panel pins upgraded to the gold
standard.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Pete
t; to a KW.
The asking price is $775 with shipment via UPS with full insurance. As you
know, these are now $980 new.
Payment options are PayPal, cash and USPS money order.
73, Mark Adams K2QO
__
Elecraft mailing list
Home: http://mailman.qth.n
USPS money order. I’ve been battling to
get Zelle setup…
73, Mark Adams K2QO
FN03ra
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qt
the items. Email me for photos.
The asking price is $3100 and will be shipped in original Elecraft packaging
via UPS with insurance. Or save $150 with local pickup anywhere between Erie,
PA and Rochester, NY.
Payment options are PayPal, cash and USPS money order.
73,
Mark Adams, K2QO
FN03ra
716
to filter through all
the other discussions about Elecraft equipment they don't own or care about.
They are not going to subscribe to this reflector.
I hope that explains things for you Dave. Sign up on the K4 reflector and learn
more about it. You are more than welcome there.
73,
Mark, WB9CIF
with any
specific questions about the K4 Reflector.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Magnus Danielson via Elecraft
Sent: Thursday, October 26, 2023 13:33
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 discussion on groups.io
the reflector. Anyone interested
in the K4, weather they own one or not, is welcome.
Those are my thoughts Gentlemen. I'll go back to sleep now.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of John Stengrevics
Sent: Tuesday, October 24, 2023 20:06
and if you look through the
archives you will find his comments.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of John Canfield
Sent: Sunday, October 22, 2023 17:59
To: elecraft@mailman.qth.net
Subject: [Elecraft] TS-890 vs K4D performance?
Hi all,
Long
I am finally about to place my order for the K2 Transceiver Kit. Can anyone
give me some guidance as to how long I might have to wait? I know shipping is
delayed due to parts delays. Has anyone received a kit recently? Are parts
arriving in trickles and orders being shipped in trickles, or are
>From the K3 and K3S manuals:
Duty Cycle CW and SSB modes, 100% 10-min. 100W key-down at 25 C ambient
I think this answers the question.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of ken.k...@gmail.com
Sent: Wednesday, October 11, 2023
their website see below.
KX2 vs KX3: Which one should I buy? Learn More
https://elecraft.com/pages/kx2-vs-kx3-which-one-should-i-buy
There never was any intention of one replacing the other.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf
and getting the value for the level of noise reduction (MN143). I cannot
identify a command sequence for programmatically determining the current
state of NR (on/off). I can get the state of NB and NTCH icons. Can
someone point out what I have missed?
--
Mark Johnson - WB8SFY
I might add that even though I’ve received my KIO3B boards, I’m still waiting
on the DVR, Bandpass Filter board and the external reference board.
I paid half when I ordered them.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Ted Edwards W3TB
Sent
Mike,
My KIO3B arrived a few weeks ago.
When they get to you on the list you will get an email asking if you still want
the option and asking for payment.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Michael Carter
Sent: Tuesday, May 30, 2023
that the radio shipment should be held up due to the
unavailability of the mic.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of John Harper
Sent: Monday, May 29, 2023 13:47
To: Elecraft list
Subject: [Elecraft] MH-3 hand microphone
>After a long w
cable, K3 to P3 serial cable
All Manuals plus Elecraft Macro Programming by KE7X
This whole package is $2600 including UPS Ground shipping and insurance to the
lower 48 and PayPal fees. I’m willing to meet within a 200 mile drive of
Buffalo, NY if you prefer.
73,
Mark K2QO
FN03ra
Hi Gary,
Not to worry. I just received my KIO3B kit. I'm still waiting on the other
options I ordered.
When they get to you on the list you'll receive an email confirming your order
and any amount due.
Then you will receive an email with the tracking number.
73,
Mark, WB9CIF
-Original
Jim,
If you have been using SSB for FT8 what are you using for a sound card?
I don't think you can use the internal sound card for data modes when in SSB.
Mark, WB9CIF
-Original Message-
From: Jim Cary
Sent: Monday, April 17, 2023 00:07
To: Mark Musick
Cc: Dave New, N8SBE ; elecraft
Jim and Dave,
My K3S when in DATA mode, the MIC+LIN says "not APPL".
Jim you must not be in DATA mode. You have to be in DATA mode to use the
internal sound card for FT8.
I got my K4D a year ago so it has been a while since I worried about such
things.
73,
Mark, WB9CIF
-Origin
Also, if you ordered a K4HD and not a K4D you are still waiting.
This happened to me until I changed my order to a K4D and said I would take the
HD upgrade board when it came out.
I got my K4D in 3 or 4 weeks. This was last May.
73,
Mark, WB9CIF
K4 #743
-Original Message-
From: elecraft
As a first step for both of you, I would do a TX Gain calibration and see if it
fails for the 15 meter band.
That may also fix your problem.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Saul Broudy via Elecraft
Sent: Monday, April 10, 2023 07
Per the K3 manual page 17 the K3 can key +200VDC @ 5A.
No need to have a key line buffer if the amp keying voltage and current meet
those specs.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of James F. Boehner, MD via Elecraft
Sent: Wednesday
Last time I looked at their website John the K3 filter page was blank.
I was looking for the 200Hz filter.
The blank page I think says they no longer manufacture K3 filters.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of j...@kk9a.com
Sent
-list at:
kd8...@gmail.com
Thanks and 72/73 de Mark KD8EDC
KX3/PX3/KPA100
--
___
“….the most improper job of any man, even saints (who at any rate were at
least unwilling to take it on), is bossing other men. Not one in a million
is fit
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
My K2 keyer works on test and 0.1 watts on a new installation, but after that
it cuts out. I suspect RF interference. Any other thoughts before I retire the
station set up?
Thanks,
Mark
Sent from my iPad
__
Elecraft mailing list
Home
Tom specifically says to use version 2.0 of com0com and not version 3.0.
Version 3.0 will not work for Win4K3Suite or Win4K4Suite.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of John Overbaugh
Sent: Monday, January 16, 2023 21:40
To: Lou Laderman
,
Mark
W7MLG
On Sun, Jan 15, 2023 at 8:27 AM John Overbaugh wrote:
>
> I'm trying to set up my KX3 on a new Windows 10 computer using Win4K3.
> Has anyone found a satisfactory solution to com0com's test driver
> issue? Windows 10 enforces signed drivers; because com0com is a test
>
Hi,
I have a K1 and am looking for the KTS1 bale.
Thanks,
Mark
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Hi,
I have a K2/100 and am looking for a KAT 100 in working order.
Thanks and 73’s,
Mark/KB2PIZ
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
changed inadvertently. Even if you
say to yourself "I haven't changed a thing" check it anyway.
Both of these have solved these kinds of problems for me in the past.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Bill Coleman via Elecraft
Se
with Ecosmart lights from Home Depot. Those were RFI-free.
Any time you buy a LED light, you need to test it for RFI before installing it. If you buy a bunch
of LEDs, test them all. There might be just one that is making RFI, even though they all appear
identical.
--Mark K7NEW
--
Mark
Pete,
As Chet mentioned, check the config menu to make sure the setting is still per
band.
I suggest you run a TX calibration.
Then go back to each band and set the K3 power level you want to drive the
KPA1500.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net
to
something it didn't like.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of W3AB/GEO
Sent: Sunday, October 30, 2022 00:01
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500 RELIABILITY
I don't have one but I do have access to one
Charles,
>From page 34 of the KPA1500 manual: LCD Message
Fault LPF VMON Incorrect bias voltages at the TR switch.
Fault Type Hard
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of charles respess
Sent: Friday, October 21, 2022 07
is there to answer lots of questions.
Wayne is also on this reflector and answers questions.
Check it out if you haven't already.
73,
Mark, WB9CIF
K4D #743
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Kenneth Christiansen
Sent: Thursday, October 20, 2022 12:48
To: Elecraft
subjects.
73,
Mark, WB9CIF
K4 Serial #743
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of H D Barr
Sent: Tuesday, August 9, 2022 13:09
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K4: No TX power in audio based digital modes
New K4 seems to transmit fine
with a path
to ground for your AKG 240 headphones to work.
73,
Mark, WB9CIF
K4D Serial #743
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Roy Morris, Jr. via Elecraft
Sent: Monday, August 1, 2022 11:43
To: Elecraft Reflector
Subject: [Elecraft] K4 Front Panel Phones
When I had the KPA500/KAT500 I also had the KPA on top of the KAT. No problem.
It is also my understanding that like Ian it was designed to be set up with the
KPA on top of the KAT.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Ian Kahn
Sent
in there and they will select
other luggage.
73,
Mark
W7MLG
On Tue, Jun 28, 2022 at 2:29 AM Jim Brown wrote:
> On 6/28/2022 1:46 AM, Geert Jan de Groot wrote:
> > And if you feel otherwise and know it all better - it's a free world and
> > everyone has an opinion! - then I kindly ask
I'm thinking Red Dog Bone Capacitors like these:
https://reverb.com/item/32640625-47pf-500v-lemco-dog-bone-capacitor-marshall-jmp-jcm800
https://www.surplussales.com/CAPACITORS/RF-TEMPDOGBONE.HTML
73,
Mark
W7MLG
On Wed, Jun 22, 2022 at 7:19 AM David Christ wrote:
> A friend put a quest
. Which command does this?
And the bonus question...
If in OFS mode, will this command that targets VFOB move VFOA up/dn by the
coarse setting? The UP/DN commands when applied to VFOB just changes VFOB
frequency and seems to ignore whether OFS is on or off.
Thanks!
73
Mark
AJ6CU
on digital.
I have a K2 for my QRP ops and never run it more than 7 or 8 Watts.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Kevin Robertson via Elecraft
Sent: Saturday, June 4, 2022 13:53
To: Rick NK7I
Cc: elecraft@mailman.qth.net
Subject: Re
Thanks
On Thu, Jun 2, 2022, 1:43 PM C.A. Jones wrote:
> Pending receipt of payment, this KX3 is sold.
>
> On Thu, Jun 2, 2022 at 2:27 PM C.A. Jones wrote:
>
> > For sale: Loaded Elecraft KX3 160-6m all-mode QRP transceiver with SDR
> > architecture and advanced DSP, in cosmetically pristine
The simple answer John is "Yes". Your KPA1500 cooling fans are running as
intended.
73,
Mark, WB9CIF
KPA1500 Serial #112
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of JOHN SILVA via Elecraft
Sent: Sunday, April 24, 2022 21:35
To: elecraft@mailm
Hi Darrell,
The projection is for orders placed in December 2021 that they will be
delivered in August 2022.
Mark, WB9CIF
From: AB2E Darrell
Sent: Saturday, April 23, 2022 18:55
To: Mark Musick ; Elecraft Reflector
Subject: Re: question order date of recently received K4D
OK thanks Mark
Serial #703 was delivered on 4/18/22. It was ordered on 3/14/21.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of AB2E Darrell
Sent: Saturday, April 23, 2022 17:36
To: Elecraft Reflector
Subject: [Elecraft] question order date of recently received
re "UNSAFE" mode. In this case,
unwanted
transmit can be avoided by turning the PC on before the K3S.
This should also apply to the K3 as it was part of a firmware update. I don't
remember which one.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Beha
I would not think the software / firmware would work. The PX3 connects to
the KX3 serial port and they talk. For example, the PX3 knows what
frequency the KX3 is on. It tracks the KX3 and shows colored bars where the
VFO passbands are.
73,
Mark
W7MLG
On Mon, Feb 14, 2022 at 7:58 AM Ed G wrote
checked
after purchase. I could not find how much they charge for that service.
Even that is only calibrated to 5% with 3% typical. So, if you off 5W while
measuring 100W, who knows, it might be just the calibration error.
73,
Mark
W7MLG
On Sun, Feb 6, 2022 at 10:11 AM Bob McGraw wrote:
> 'T
With the right tools and a highly skilled operator, that can be replaced.
I've seen FG456 BGAs replaced. Personally, I have neither the tools nor the
skills.
And, I don't mean the $500 BGA rework machines. I mean the ones that cost
many times what the board costs.
73,
Mark
W7MLG
On Thu, Jan 20
What is the chip and what package is it in?
73,
Mark
W7MLG
On Thu, Jan 20, 2022 at 4:47 PM Jim Brown wrote:
> The SVGA board in one of my two P3s has failed, and a friend who works
> for Elecraft told me it's un-repairable. The reason is that its the
> failure of a large chip th
Is R26 still the most current for most users? Or is there an R27?73,Mark WU6ROn Jan 14, 2022, at 9:35 AM, "Bayard
Coolidge, N1HO" wrote:"R28" is still in beta testing, AFAICT, so you may have to
forage around on the firmware download menu screento make sure your K4 wil
ibration now matches
the more common industry standard. (Previously it was 5 dB per S-unit.) With
this change, each tic mark of the S-meter graphic represents 3 dB.DVR (DIGITAL
VOICE RECORDER): The DVR can now be used for transmit voice message
record/play. There are 8 messages (2 banks of 4).
many other documents for specific aspects.
73,
Mark
W7MLG
On Sat, Jan 1, 2022 at 7:56 PM wrote:
> My thanks to the many who replied. The answer to my question - whether
> there is a consensus about how (or whether) to remove solder flux from PCBs
> - is a clear no, there is no
and capabilities is really
world-class. No one else does it better than Elecraft.
Cheers.
73,
Mark WU6R
Sent from my iPad
> On Nov 17, 2021, at 1:57 PM, Wayne Burdick wrote:
>
> We're updating and expanding both manuals as time permits. For the operating
> manual, we're
with the K3 and
KX3. One of the things I have always liked and admired about Elecraft is they
have always provided fantastic owner’s manuals.
73,
Mark WU6R
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hi,
Has anyone been using the Mazzoni Baby Loop with the version 2 ATU and
serial comms? If you have did you have any issues with it?
73 Mark M0WGF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
When I answered Pete I must have hit reply and not reply all.
As I told Pete I saw a reference to it being at least 12 weeks after they
closed the on line order page.
We're not at 12 weeks and the at least part indicates it may be longer.
73,
Mark, WB9CIF
-Original Message-
From
the
finals, sometimes multiple times.
I'm using it with a TS-590 that has the spike fix, but it still is not
perfect.
73,
Mark
W7MLG
On Sat, Sep 18, 2021 at 6:47 PM Jerry Kirshenbaum wrote:
> re: it'd pay to review the SPE
>
> In May 2021 I bought a SPE 1.5K-FA 2nd generator new from the di
Their 100 Ah battery weighs 61 lb. I bet it is still a lead acid battery. A
100 Ah Lithium Iron Phosphate weighs about 31 lb. A Lithium Cobalt may be
half that.
They are dancing around but never say no lead or no acid, only "no acid
mist". Any regular gel cell meets that.
73,
on the K4. I have a 43" 4k monitor in front of my Ham station
connected to my PC. I sure would like to try it out when it is available.
73,
Mark
W7MLG
On Wed, Aug 18, 2021 at 12:19 PM Ray Spreadbury via Elecraft <
elecraft@mailman.qth.net> wrote:
> I guess I did not explain clear
expect
delivery.
It isn't even close to 12 weeks. What more of an update are you looking for?
I finalized my order and gave them half deposit.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Henk PA5KT via Elecraft
Sent: Monday, August 16, 2021 14
Those power banks are full of switching power supplies and I bet horrible
RF noise generators.
73,
Mark
W7MLG
On Mon, Aug 9, 2021 at 9:04 AM Gwen Patton wrote:
> I've got a Talentcell 12Ah LiFePO4 that seems to work just fine. I have
> some of their other little power banks, and the
and he’s said solid
copy. The audio scope showed sidebands out of the digital area.
The radios can be better but the operator seems to be most of the problem.
Tell them politely and hope they listen, but most will just continue. “CQ
Contest”
Mark. WB7TLK
Sent from my iPhone
> On Jun
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Thanks Bill,
I’d not thought of using the Elecraft Utility. That’ll work for me
Mark. N2QT
> On May 12, 2021, at 8:15 PM, Bill Rogers W3UL wrote:
>
> I use two techniques to turn off my remote setup.
>
> 1 - I run Win4K3 on the remote computer to control some of
Thanks Don,
I was especially worried about the very gradual drop of voltage as the
unpowered
power supply’s caps discharge. I guess in the long run I’ll need to come up
with a way
to command the rig off. The computer will have a commanded power off via the
UPS.
Mark. N2QT
> On May
Is there much danger of issues caused by just turning off its power supply
rather than
doing a commanded off for a K3?
I’m looking at remotely operating an unattended k3.
Mark. N2QT
__
Elecraft mailing list
Home: http
it is for a really small fry like myself.
Has Elecraft stated why they are no longer available? I have not checked
with my supplier recently, but I expect there would be no interest in low
volume runs when demand can't be met for their high volume parts.
73,
Mark
W7MLG
On Mon, May 10, 2021 at 5
cable containing a stranded center conductor (for flexibility) with two BNC
connectors and an adapter between my KX3 and amp. Don't buy cheap no name
cables from Amazon or eBay.
73,
Mark
W7MLG
On Sun, May 9, 2021 at 3:49 PM w...@flashdog.us wrote:
> Hi Everyone,
>
> Quick question: Should
insulated. I got some off spool ends and you may find it at
Hamfests if someone is doing surplus stuff. It does not dry out and lose
plasticisers like PVC, so it is good even if it is old.
73,
Mark
W7MLG
On Sun, May 2, 2021 at 10:19 AM David Haines wrote:
> My son has been having trou
than the usual next day shipment. It is really disruptive.
Regards,
Mark
On Thu, Apr 29, 2021 at 10:20 AM Dave Cole wrote:
> An interesting story from OPB dealing with the global shortage of chips...
>
>
> https://www.opb.org/article/2021/04/29/it-s-not-just-cars-ipads-and-macs
and
monitor the HV transmission system. 69kV - 765kV.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of MIKE ZANE
Sent: Monday, April 26, 2021 21:13
To: Bill Frantz ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: High school drafting class, ~1975
Is the key line indication on all the time? This may be indicative of a
stuck key line. There was an unsoldered resistor on mine causing the issue.
73,
Mark
W7MLG
On Sun, Apr 18, 2021, 2:38 PM wrote:
> I just purchased a used KPA500 (SN 0456) from a close friend. The amp was
> jus
.
I've found surplus heliax cables from Cell Tower installs and test
setups made of the really expensive Gore Teflon cable for pennies on
the dollar. Real Amphenol silver plated connectors and adapters are
common, also very reasonable.
73,
Mark
W7MLG
On Sat, Apr 10, 2021 at 8:45 AM Larry Shapiro
. Really good
ones might have variable transformers. I haven't researched this type
of product much though.
73,
Mark
W7MLG
On Wed, Mar 10, 2021 at 11:33 AM Julia Tuttle wrote:
>
> Hi,
>
> I've run into a curious issue with my KX3 and Etymotic ER3SE earphones.
>
> It see
I have a Perseus SDR set up to measure phase noise, and also had
access to a high dollar phase noise measurement system. The Perseus
was sufficient to see the difference, about a 20 dB increase at 15 kHz
or so, which is significant. I have links to my setup on my qrz.com
page.
73,
Mark
W7MLG
, which is one of the reasons it is prized for
DXpeditions and Multi Radio contest stations.
73,
Mark
W7MLG
On Wed, Mar 10, 2021, 7:33 AM Wes wrote:
> If it mattered to me I would give the Chinese version a shot.
>
> Wes N7WS
>
> On 3/10/2021 6:18 AM, Gary Peterson wrote:
> &
, one
near the KPA500 and one near the shack. The advantage is you don't
have to use long USB / RS232 cables. The two computers can be on WiFi
which usually is not bothered by HF.
73,
Mark
W7MLG
On Wed, Mar 3, 2021 at 9:46 AM Tim C wrote:
>
> I live in a nursing home and am mobility im
I would suspect it is the same as the K3/K3S.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of w4sc
Sent: Saturday, February 20, 2021 08:15
To: elecraft@mailman.qth.net
Subject: [Elecraft] K4 10MHz Reference level??
Hello Elecraft K4 design team
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Thanks Don and Joel, who both suggested bad solder joints. I touched up
all the LCD and U1 solder joints on the Front Panel and the problem was
resolved!
Mark
W8EWH
On Sun, Feb 7, 2021 at 1:49 PM Don Wilhelm wrote:
> Mark,
>
> I think you will find that the socket pins of Front
. Thanks.
Mark
W8EWH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
standards to
compare to.
73,
Mark
W7MLG
On Sat, Feb 6, 2021 at 4:55 PM Jim McCook wrote:
>
> Good points, Ray and Jim, I should have been more detailed with what I
> posted. I checked The Bird 43 with two other Bird 2500w slugs from
> friends and they were all reading the same with
to not lose money.
If you really wanted to try one out, you could buy it, use it for a
while and then offer it for sale to someone else. With the K4 in such
demand, you may even be able to get more than list price for a gently
used one that can be purchased today.
73,
Mark
W7MLG
On Wed, Feb 3, 2021
to share more details if you are interested.
Regards,
Mark WU6R
mark3...@icloud.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
It's not lost on me that it is a 4K resolution image. My Ham shack
monitor is a 43" 4K TV just waiting patiently for a K4 kit.
73,
Mark
W7MLG
On Sun, Jan 24, 2021 at 12:17 PM Wayne Burdick wrote:
>
> Those of you who saw Eric's Friday presentation got a brief look at one part
You cable likely has a fake Prolific USB to RS232 chip. The latest
drivers will refuse to use it. Where did the cable come from? I don't
think Elecraft used fake chips.
You probably need a new cable to work with the latest drivers.
73,
Mark
W7MLG
On Sun, Jan 17, 2021 at 4:26 PM Chris Meagher
Mike,
What serial number is your K3?.
If it is an early serial number it could be corrosion on the front panel pins.
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mike March
Sent: Wednesday, January 13, 2021 22:40
To: elecraft@mailman.qth.net
Jim is exactly right.
A few weeks back, one poster to this list stated he wished he hadn't posted
that he had received his K4. He stated the number of e-mails he received,
mostly direct I believe, was uncontrollable.
If I took delivery of a K4, I would not tell the world about it.
Mark, WB9CIF
-manufacturer-to-resolve-arc-fault-circuit-interrupter-rfi-problems
73,
Mark
W7MLG
On Mon, Jan 4, 2021 at 3:34 PM weave...@usermail.com
wrote:
>
> Tom,
>
> I had the same problem with a new house in 2011. The Eaton breakers of that
> era (2010-2012 or so) were faulty and being re
Thanks. I might even work on my screwdriver antenna autotuner now.
73,
Mark
W7MLG
On Mon, Dec 28, 2020 at 1:37 PM Wayne Burdick wrote:
>
> KX3 version 2.95 firmware is now available. It supports the "SW;" remote
> control command (read SWR value during transmit).
>
;1", "2" and "3"),
compression set to "1", ATU disabled (set to CAL).
Any ideas of why the mic gain would be super low on just one band?
--Mark K7NEW
--
Mark Newbold
Port Angeles, Washington, USA
__
Elecraft
rce code to see exactly what changed and how to fix your
code. I expect Elecraft will get it sorted out quickly. They are smart
folks.
73,
Mark
W7MLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
1 - 100 of 1621 matches
Mail list logo