[Elecraft] [KAT500] Remote Installation

Thanks Kurt, Nice photos! Could you please take a moment and tell us folks on the Reflector a bit about the remote KAT500 setup.  I'm interested in the wireless connectivity - exactly what box is that atop the Power Supply (manufacturer?) and how about the Hi-Low tin box to the left - exactly

[Elecraft] Don Wilhelm A Special Thank You!

Don, You THE man !!  A guy who is unselfish and has a great attitude.  Pleasure to share the Elecraft Reflector with him and others like him.  73, Rich, K3VAT Message: 1 Date: Fri, 29 Mar 2013 12:56:55 -0400 From: Phil LaMarche plama...@verizon.net To: elecraft@mailman.qth.net Subject:

[Elecraft] [K3] - Speaker output in various modes

New K3 with latest firmware.  Newbie user.  HRD Software. Situation: Set speaker output volume for comfortable sounding CW and SSB (RF gain close to 'full').  Then when going to data mode the same (CW or SSB)  signals blast me out of the shack - very very loud requiring me to substantially back

[Elecraft] [K3] JT65

George, JT-65 should run just fine with your configuration. How do you have the soundcard hooked to the K3 (which connections are you using)?  There are also several K3 configurations settings that one needs to set to ensure that the soundcard and the K3 can talk and PTT is working - are you

[Elecraft] [WTB] KRC2 Band Decoder

Looking for a new or used KRC2 Band Decoder to go with my K3 and DXEngineering Remote antenna switch box. Please respond off-line.  73, Rich, K3VAT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K3/KPA500/KAT500 - Band Decoder for Antenna Switching

Hello, I currently have a K3 KPA500, and, shortly I hope, a KAT500.  I have 3 antennas that I electronic switch with a DXEngineering RR8HP Remote Antenna Switch by manually selecting them on the DXEngineering Antenna Control Console. I wish to have some kind of band decoder and electronic

[Elecraft] KAT500

Are the new KAT500 units shipping this week? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] K-Line Addition - DC Power Supply (Suggestion)

How do Elecraft users feel about the possible addition of a high-quality DC power supply that matches both the physical dimensions and veneer of the existing K-Line?  The power supply could even be sized to set above/below the new KAT500 and should, IMHO, have multiple DC outlets such as

[Elecraft] KAT500 - Shipping Info

Have the KAT500 units started shipping?  Any updates appreciated. 73, Rich, K3VAT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] Fwd:

wow this is pretty crazy you should check it out http://www.panews15.net/biz/?employment=3416839 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3 - Power Meter (and ALC)

Regarding my posting on the K3 Power Meter and digital modes ... thanks to W3FPR, KG0KP and NR4C for their response and addressing the topic of how to set the power out using the ALC as your indicator.  73, Rich, K3VAT __ Elecraft

[Elecraft] K3 - Power Meter

My setup is a simple resonant dipole, HRD/DM780 software, and a K3/100 with latest firmware.  I often operate PSK or RTTY, using the DM780 software and running approx 35 watts.  I've noticed that for the first couple of seconds after I key the rig that the K3's power meter will display only 1

[Elecraft] K-3 Headphone Impedance (was Pro Set Elite)

Is it important to chose a headphone impedance close to what the K3 would like to see?  For example, Don recommended the Yamaha CM500 which, according to the website, has a headphone impedance of 120 ohms; other headphone impedances seem to run from around 32 ohms (the Yamaha RH2C) to several