I have built the KAT100 and KPA100 into a custom EC2 housing and it is working
very well,
there is only one little problem in the setting which I do not like. The
combo needs two power
supply cables, one for the high current into the KPA100 (Anderson connectors)
and one for the
KAT100
Werner,
Do you have the header for the AUX DC cable from the KPA100 installed in
your KAT100? In other words, do you have the KAT100-2?
If so, there is no need for the power cable to the KAT100, it will be
powered from the cable to the KPA100.
73,
Don W3FPR
On 1/4/2011 11:07 AM, Dr. Werner
hi Don, Gary, Bill,
Don Wilhelm schrieb am 4 Jan 2011 um 13:47:
Do you have the header for the AUX DC cable from the KPA100 installed in
your KAT100? In other words, do you have the KAT100-2? If so, there is no
need for the power cable to the KAT100, it will be powered from the cable
to
Werner,
From prior photos that I have seen, you have great milling
capabilities, but the KPA100 speaker is exposed through the heatsink (no
need for any milling). The only problem for using the KPA100 speaker is
that you have to run a separate cable for the speaker (and provide an
input
4 matches
Mail list logo