[Elecraft] [K3] P3 v1.17

I have installed version 1.17 in my P3 and have enabled SVGA data display. I set the font size to 2 where I think the decoding takes place at the bottom of the external monitor I have turned on CW TEXT DEC and set to CW 30-90 on the K3. I thought I would see the CW decoded, but I am seeing

Re: [Elecraft] [K3] P3 v1.17

Ray, Q1. Are you seeing the decoded CW on the K3 VFO B display? If not, then the problem is in the K3 config. If so, then the problem is in the P3. Q2. when you updated the firmware in the P3, did you have the P3 utility send ALL the new files? You need P3M0117 and P3S0105 both, plus you should

Re: [Elecraft] [K3] P3 v1.17

The CW code display is now working on the external monitor. It has to be turned on and off through the P3 SVGA menu. I thought the external monitor might revert to the full screen (turning off the decode screen) when the mode is changed from CW to LSB or USB. This is not the case. Unless

Re: [Elecraft] [K3] P3 v1.17

I think there will soon be an upcoming firmware fix for the K3's cw decode problem, so I have heard.. John N1JM -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-P3-v1-17-tp7559647p7559654.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] [K3] P3 v1.17

*Before the next contest I hope...:-) 73 * On 23 July 2012 08:53, John_N1JM johnn...@gmail.com wrote: I think there will soon be an upcoming firmware fix for the K3's cw decode problem, so I have heard.. John N1JM -- View this message in context: