Apparently I forgot to quote the original message I was replying to. It
happens in Data mode only on 6 meters. It does it with both VFOs on the
same frequency (i.e. 50.276) or with one VFO a few kHz away, both VFOs
in Data mode. I probably would have never noticed it had it not been
for
What mode and frequency on VFO B AND VFO A when this occurs?
Sent from my iPhone
...nr4c. bill
> On Nov 16, 2017, at 3:50 AM, Michael Eberle wrote:
>
> Was this issue ever resolved? I have noticed the same thing with mine
> although the issue does not appear to be the
Was this issue ever resolved? I have noticed the same thing with mine
although the issue does not appear to be the tuner itself, but the K3 is not
transmitting any power so the tuner has nothing to work with. I am running
FW version 5.60 an have this issue but only on 6 Meters.
I can power up
You need to make sure both VFO A B are in the same mode, else you will
get N/A.
Ken K3IU
Steve Ellington wrote:
How are you getting split in data A? When I push SPLIT I get SPL N/A.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Chuck - AE4CW ae...@att.net
To:
Has anyone noticed that ATU TUNE does not work (properly) when in DATA A
Split mode? The relays clatter for about three seconds but no RF is
produced and no SWR reading is resolved. If I drop Split, ATU TUNE works
fine. I'd appreciate if someone else could verify if their K3 is behaving
the
I can confirm this behavior. In Data A mode split, no (or very, very little)
rf out. Exit split mode and get ~5w during tune. Also, when the TUNE (not atu
tune) button is pressed, the display which normally shows swr displays -- and
power reads 0.0. When you hit the tune button again to
Chuck - AE4CW wrote:
Has anyone noticed that ATU TUNE does not work (properly) when in DATA A
Split mode? The relays clatter for about three seconds but no RF is
produced and no SWR reading is resolved. If I drop Split, ATU TUNE works
fine. I'd appreciate if someone else could verify if
How are you getting split in data A? When I push SPLIT I get SPL N/A.
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Chuck - AE4CW ae...@att.net
To: elecraft@mailman.qth.net
Sent: Wednesday, October 07, 2009 9:30 PM
Subject: [Elecraft] ATU TUNE does not work in DATA A Split
8 matches
Mail list logo