I have successfully un-bricked my K3.
No attempt to load 4.83 would work. Even after updating to the current version
of the utility and trying a different USB/Serial device.
However, I was able to successfully load the 4.67 firmware. After I did that, I
did a Send New Firmware to K3
Excellent! I'm very glad to hear that, Bill.
Phil W7OX
On 4/2/14, 7:34 PM, Bill Coleman wrote:
I have successfully un-bricked my K3.
No attempt to load 4.83 would work. Even after updating to the current version
of the utility and trying a different USB/Serial device.
However, I was able to
Bill AA4LR got the following message from the K3 Utility:
17:13:54 Sending firmware file hfpf0115.hex to FPF
17:14:16 Send FPF firmware failed at load addresst 43
17:14:19 FPF firmware load failed
You can get more detail about the problem by pulling down the View
menu in the K3 Utility and
I noticed this weekend that Elecraft had updated the firmware (not beta) back
in February. So, today, I thought I would try to update mine.
However, it fails during the FPF load EVERY TIME:
17:12:09 K3 boot loader is ready for MCU firmware load. RS-232 38400 bps.
17:12:09 New firmware is
PS - the specific error I get is:
“FPF Programming Failed.
“Verify file source and revision. Turn the K3 off and back on, then re-try the
firmware load.”
I’ve re-downloaded the files from Elecraft a couple of times using the K3
Utility. I’ve powered off and on many times.
Suggestions??
On
[mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Bill Coleman
Sent: Monday, March 31, 2014 3:18 PM
To: Elecraft
Subject: [Elecraft] Help! I have bricked my K3.
I noticed this weekend that Elecraft had updated the firmware (not
beta) back in February. So, today, I thought I would try
On Mar 31, 2014, at 5:31 PM, Cady, Fred fc...@ece.montana.edu wrote:
Ouch.
Maybe try deleting the firmware files from your computer and then download
them from Elecraft and try again? I think I've heard that sometimes files
can get corrupted when being downloaded.
Good luck and73,
Fred
Are you using the latest K3 utility? If not try upgrading that first.
Sent from my iPhone
...nr4c. bill
On Mar 31, 2014, at 5:17 PM, Bill Coleman aa...@arrl.net wrote:
I noticed this weekend that Elecraft had updated the firmware (not beta) back
in February. So, today, I thought I would
Have you tried to re-load the last released (not
beta) version?
73, Phil W7OX
On 3/31/14, 2:33 PM, Bill Coleman wrote:
On Mar 31, 2014, at 5:31 PM, Cady, Fred fc...@ece.montana.edu wrote:
Ouch.
Maybe try deleting the firmware files from your computer and then download them
from Elecraft
Bill,
Try this - first download the latest K3 Utility and get the new firmware
files as usual (Check for New Firmware).
Then using the Advanced tab of K3 Utility, Check the DSP1 box and
click Load checked firmware.
When that completes, do the same for the FPF loading only that firmware.
Are you using a USB/Serial adapter? If you have another one of a
different type, or a real COM port, you might try them instead
73/GL,
~iain / N6ML
On Mon, Mar 31, 2014 at 2:17 PM, Bill Coleman aa...@arrl.net wrote:
I noticed this weekend that Elecraft had updated the firmware (not
Yes, I upgraded to the latest utility after I ran into the error.
On Mar 31, 2014, at 5:33 PM, Nr4c n...@widomaker.com wrote:
Are you using the latest K3 utility? If not try upgrading that first.
Sent from my iPhone
...nr4c. bill
On Mar 31, 2014, at 5:17 PM, Bill Coleman
No. It wasn’t very obvious how you do that. I’ll check it out.
On Mar 31, 2014, at 5:45 PM, Phil Wheeler w...@socal.rr.com wrote:
Have you tried to re-load the last released (not beta) version?
73, Phil W7OX
On 3/31/14, 2:33 PM, Bill Coleman wrote:
On Mar 31, 2014, at 5:31 PM, Cady, Fred
Yes, if course I’m using a USB/Serial adapter. This is a MacBook, after all.
I don’t have one of a different type handy. It’s just weird that the MCU
firmware downloads 100% ok each time, but the FPF does not. Why that would be a
serial port problem is beyond me….
Unfortunately, Macs have
Hmmm ... OK Bill. Here's my experience, yours may vary for a variety of
reasons but for what it's worth:
I've never had a Mac and know nothing about them. I *have* had
occasional problems with the uploads from my Windoze XP and subsequently
Windoze 7 laptops. So far, in all cases,
One place to find old FW versions is the beta archives on your own computer.
Betas are same as released FW with same number. I think Elecraft also has old
beta FW on beta site.
Sent from my iPhone
...nr4c. bill
On Mar 31, 2014, at 9:51 PM, Bill Coleman aa...@arrl.net wrote:
No. It wasn’t
16 matches
Mail list logo