going to send it back. Not
sure what I think about a "cable" that requires a watch battery :)
73,
Rich
kd0zv
- Original Message -
From: "Paul Heller" <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 25, 2006 6:52 AM
Subject: Re: [Elecraft] Begali and K2
Vic
Vic K2VCO wrote:
keyers in my Elecraft K2 and TS850s. This problem can be described as
an intermittent 'misfire', in which there is a delay before dot or
dash generation starts after the contacts are closed.
Aha (a light goes on ...). I've had a Begali Signature for about a
year, and from ti
Well looks like I dont have anything to worry about according to Begali.
Rich,
your key have a gold contacts and didn't the bounces phenomena.
I am sure that with this contacts you having a good work,same at all others
keys with gold
contacts and MicroHam keyer.
thanks & 73,Piero
ROBERT CARROLL wrote:
Is it true that the Pro III does not support Curtis Mode B? I have heard
90% of cw devotees use Mode B!
Bob W2WG
Hmmm ...
10% of the male population is left-handed, 10% of the general population
can sleep at-will, 10% of the male population has moderate to severe
colo
Monday, March 20, 2006 6:26 PM
Subject: RE: [Elecraft] Begali and K2
Is it true that the Pro III does not support Curtis Mode B? I have heard
90% of cw devotees use Mode B!
Bob W2WG
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Rich
McCabe
Sent: M
: [Elecraft] Begali and K2
Thanks Vic,
Thats great info although most of it over my head :)
The dilema I have now is I was considering ordering the new MicroHam USB
keyer. It sounds like this might not be a good solution right now. To make
things worse, I really am a novice at CW. I never have
kd0zv
- Original Message -
From: "Vic K2VCO" <[EMAIL PROTECTED]>
To: "Rich McCabe" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, March 20, 2006 5:19 PM
Subject: Re: [Elecraft] Begali and K2
Rich McCabe wrote:
I just bought a new Begali Signature to go with
Rich McCabe wrote:
I just bought a new Begali Signature to go with my K2/100. I was
thinking about buying a MicroHam/K1EL USB CW keyer to work with my Pro
III so I can run mode B.
I just ran into this article about a debouncer and the Begali keys.
http://www.microham-usa.com/Products/Begali
I kept hoping someone who knew would jump in here, but nobody has. So, I'll
do it. The K2 doesn't use the same pin for dit and dah. That's how A-DET
works, on separate pins.
The K1 does use the dual-voltage scheme, and I have no idea about the Kixie.
However, the K2 will not care one whit.
Dan /
. Did your replacement include new arms and adjusting
screws?
73,
Rich
- Original Message -
From: "David F. Reed" <[EMAIL PROTECTED]>
To: "Rich McCabe" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, March 20, 2006 4:38 PM
Subject: Re: [Elecraft] Begali and K2
On Mar 20, 2006, at 2:32 PM, Rich McCabe wrote:
I just bought a new Begali Signature to go with my K2/100. I was
thinking about buying a MicroHam/K1EL USB CW keyer to work with my
Pro III so I can run mode B.
I just ran into this article about a debouncer and the Begali keys.
http://ww
Rich,
my solution was to order the silver contact replacement set from Begali
instead, for the sake of simplicity.
It took a while for the parts to arrive, but they installed very easily,
and work great.
The theory is correct as far as my experience goes.
However, I am an amateur, not a pro,
I just bought a new Begali Signature to go with my K2/100. I was thinking
about buying a MicroHam/K1EL USB CW keyer to work with my Pro III so I can
run mode B.
I just ran into this article about a debouncer and the Begali keys.
http://www.microham-usa.com/Products/Begali.html
This seems p
13 matches
Mail list logo
