Hi Rich,
Thanks for the replay.Yes, KDVR is not installed and I had it in “nor”. I
changed to “Not Installed” and now the message has gone. Mine is K3 sn. 2611.
73,
JosepEA6BFBUG #256 - CWops #3072 - FOC #2182 (ex 1724)
On Saturday, April 30, 2022, 16:08, Rich wrote:
I get this message
I get this message randomly on my K3S and it has the DVR installed and
it is set to NOR. What I have discovered, when I get the ERR DVR
message and I look at the Config Firmware versions. The DVR FW version
which should be 2.05 is some weird off the wall number like 0.01.
The KDVR3 has/had
Josep - If you do not have the DVR installed in your K3, go to the
Config Menu and check the KDVR3 entry. It should say 'not inSt'. If it
says 'nor' then turn it to 'not inSt'.
I hope that solved the problem.
73 de David G4DMP
--
+ - - - - - - - - - - - - - - - - +
| David M Pratt, Kippax,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Hi guys,
I have noted that when I turn on the K3 I get this error message: ERR DVRHow
can I remove that message or correct it.?
Thanks buddies,
73,
JosepEA6BFMyWebsiteBUG #256 - CWOps #3072 - FOC #2182 (ex 1724)
__
Elecraft
Larry,
Check the CONFIG menu. If it is set to KDVR3 NOR, then the K3 is
expecting the KDVR3 to be installed. If it is not installed, you will
receive an error. Set the CONFIG KDVR3 setting to not inSt if the
KDVR3 is not present.
73,
Don W3FPR
On 3/23/2015 6:51 PM, Larry Boekeloo wrote:
Ever since I updated to the new versions, I get an ERR DVR message at power up.
Serial number 5278
MCU 5.14FPF 1.19DSP 2.83
If I hit the config button after power up, the error goes away and doesn't
return until the next power up.
Anyone else have this issue or was there a resolution that I
Thanks Don - you are such a wealth of information.
Cockpit error as they say (as usual).
:)
Larry, KN8N
On Monday, March 23, 2015 7:09 PM, Don Wilhelm w3...@embarqmail.com
wrote:
Larry,
Check the CONFIG menu. If it is set to KDVR3 NOR, then the K3 is
expecting the KDVR3 to be
Ever since I updated to the new versions, I get an ERR DVR message at power up.
NO DVR INSTALLED either
Serial number 5278
MCU 5.14FPF 1.19DSP 2.83
If I hit the config button after power up, the error goes away and doesn't
return until the next power up.
Anyone else have this issue or was
...@livecomputers.com
To: Chris Hembreew7...@yahoo.com
Cc: elecraft@mailman.qth.net
Sent: Sun, August 29, 2010 9:15:40 PM
Subject: Re: [Elecraft] ERR DVR
in the Config Menu KDVR set to Not Inst...
~Brett (N7MG)
On Sun, 2010-08-29 at 20:09 -0700, Chris Hembree wrote:
Anyway to tell the K3 that I don't
Anyway to tell the K3 that I don't have a DVR?
Chris W7CTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
in the Config Menu KDVR set to Not Inst...
~Brett (N7MG)
On Sun, 2010-08-29 at 20:09 -0700, Chris Hembree wrote:
Anyway to tell the K3 that I don't have a DVR?
Chris W7CTH
__
Elecraft mailing list
Home:
Thanks
Just learning my way around the radio.
Chris W7CTH
From: Brett Howard br...@livecomputers.com
To: Chris Hembree w7...@yahoo.com
Cc: elecraft@mailman.qth.net
Sent: Sun, August 29, 2010 9:15:40 PM
Subject: Re: [Elecraft] ERR DVR
in the Config Menu KDVR
Today I lost power here at my home. When it was restored, I turned on
my K3 and was greeted with the ERR DVR message. What does this mean?
I do not see it listed in the Error Message list of the manual. The
radio appears to be working.
For LP-PAN users:
I now no longer see the panadaptor
it.
Willis 'Cookie' Cooke
K5EWJ
From: W5UN w...@wt.net
To: elecraft@mailman.qth.net; lp-...@yahoogroups.com
Sent: Wed, December 23, 2009 8:10:25 PM
Subject: [Elecraft] ERR DVR
Today I lost power here at my home. When it was restored, I turned on
my K3
15 matches
Mail list logo