Gentlemen, thanks for adding the APF to the K3 and the quick response to the
bug that some operators were experiencing. The APF works great. I did find
that while adjusting it when I got to APF 1.0 I heard a click in my
headphones that I am using and as I tried rotating the shift control counter
Len
I get exactly the same here. Also using 4.18.
73 Stephen G4SJP
On 06/11/2010 11:46, Len, K3LJ lzi...@mindspring.com wrote:
Gentlemen, thanks for adding the APF to the K3 and the quick response to the
bug that some operators were experiencing. The APF works great. I did find
that
K3 #202, MCU 4.18, et al.
Similar experience here. Everything normal until I rotate
the APF Shift CW and it reaches 1.00 the loud pops/cracks
begin when rotating both the Shift and Width knobs.
Rotation of the APF Shift knob now changes the display
numbers (APF 0.xx), but the Rx is very
After someone else noted that turning the APD Shift CCW it
returned to normal ops when reaching 0.27. I just tested
here and after turning to APF 1.00 and activating the
pops/cracks, turning the APF Shift CCW until it reaches APF
0.20 and returns the APF to normal ops w/o the pops/cracks.
73,
* On 2010 06 Nov 07:06 -0500, Len, K3LJ wrote:
Gentlemen, thanks for adding the APF to the K3 and the quick response to the
bug that some operators were experiencing. The APF works great. I did find
that while adjusting it when I got to APF 1.0 I heard a click in my
headphones that I am
More tests... My previous report was with the sidetone set
to 600 Hz. I set my sidetone pitch to 670 and the point at
which the APF returns to normal moved up to .27 (270 hz). I
now hear the same boop as Nate reports and a return to
normal .
73, Ken K3IU
Same problem here with the new APF in 4.18tuning SHIFT to 1khz cause APF to
click and shut offrepowering K3 restores APF.
Looks like a bug.
73, Joe W2KJ
I QRP, therefore I am
A fellow Swiss ham and I apparently were among the lucky few not to
experience any SSB power issue with Release 4.17/2.65. I wonder whether this
has anything to do with some interaction with filters or other settings.
But now after installing 4.18/2.67, I noticed that turning the shift to
.
73 Doug EI2CN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Squire -
HB9ANM
Sent: 06 November 2010 18:02
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
A fellow Swiss ham and I apparently were among the lucky few not to
experience any SSB power issue with Release 4.17/2.65. I wonder whether this
has anything to do with some interaction
...@mailman.qth.net] On Behalf Of Richard Squire -
HB9ANM
Sent: 06 November 2010 18:02
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
A fellow Swiss ham and I apparently were among the lucky few not to
experience any SSB power issue with Release 4.17
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
A fellow Swiss ham and I apparently were among the lucky few not to
experience any SSB power issue with Release 4.17/2.65. I wonder whether this
has anything to do with some interaction with filters or other settings
back in order as soon as he gets back.
Date: Sat, 6 Nov 2010 18:58:57 -0400
From: olin...@bellsouth.net
To: turnb...@net1.ie
CC: hb9...@bluewin.ch; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
Wayne has officially yanked 4.18. If SSB
Guy,
Firmware 4.18 is still available at the Elecraft website - it was 4.17
that has been pulled AFAIR.
Yes, 4.18 has some problems that have been identified on this reflector,
but for those who are willing to work around those problems, I am
certain the firmware folks at Elecraft would like
06, 2010 23:23
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
Guy,
Firmware 4.18 is still available at the Elecraft website - it was 4.17
that has been pulled AFAIR.
Yes, 4.18 has some problems that have been identified on this reflector
Both beta 4.17 and 4.18 have now been removed from the web site. 4.14 is the
latest current release.
Ever try editing a web page while in motion from an iPad? Fortunately my wife
is driving, but road bumps make typing and screen editing interesting..
Eric
www.elecraft.com
_..._
On Nov 6,
WA6HHQ -
Elecraft
Sent: 06 November 2010 23:40
To: d...@w3fpr.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control
Both beta 4.17 and 4.18 have now been removed from the web site. 4.14 is the
latest current release.
Ever try editing a web page while
by then :)
I'm going to bed now. See you all at 4am!
W4LT
Message: 31
Date: Sat, 6 Nov 2010 18:58:57 -0400
From: Guy Olinger K2AV olin...@bellsouth.net
Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift
control
To: Doug Turnbull turnb...@net1.ie
Cc: Richard Squire - HB9ANM hb9
18 matches
Mail list logo