Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-28 Thread Phil Kane
On 6/28/2018 10:00 AM, hb9brj wrote: > When dealing with COM ports created by USB devices, these 2 utilities out of > Uwe Sieber's kitchen have helped me a lot: If one is using a modern Windows OS, the Device Manager Port advanced settings do that as well, able to set COM ports up to COM256. 73

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-28 Thread hb9brj
When dealing with COM ports created by USB devices, these 2 utilities out of Uwe Sieber's kitchen have helped me a lot: COM Port Manager by Uwe Sieber: https://www.uwe-sieber.de/comportman_e.html COM Name Arbiter Setter: https://www.uwe-sieber.de/misc_tools_e.html (scroll down on page) 73,

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-27 Thread Erik Basilier
The com ports used for physical control of the radios are normally set up when I first put a K3 into operation. The MicroHAM router deals with additional com ports that are not physical but serve to provide communications between pieces of software within the computer. When choosing those com

[Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-24 Thread john
Doesn't the MicroHAM router control the com ports? You should be able to set it to anything you want in the router. I have had no issues using Com 1, 2 and 3 with Writelog. John KK9A K7TV wrote: I run two K3 radios with MicroHAM u2R for SO2R in N1MMplus. It has been working, but occasionally

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-22 Thread Bob Wilson, N6TV
Erik, 1. Please set the Windows System Environment variable devmgr_show_nonpresent_devices to 1 2. Open Windows Device Manager and select View -> Show Hidden Devices 3. You will probably see far more COM port devices than seen previously 4. Expand Ports 5. (Expand Eltima devices

Re: [Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-22 Thread Nr4c
Use Device Manager/Ports/Advanced and change the port number(s) for the KUSB(s) in question. Sent from my iPhone ...nr4c. bill > On Jun 22, 2018, at 2:04 PM, Erik Basilier wrote: > > I run two K3 radios with MicroHAM u2R for SO2R in N1MMplus. > It has been working, but occasionally I get a

[Elecraft] How to change K3 COM port to a high number (to avoid N1MM/u2R problem)

2018-06-22 Thread Erik Basilier
I run two K3 radios with MicroHAM u2R for SO2R in N1MMplus. It has been working, but occasionally I get a message about COM port conflicts, about the two COM ports that are used to control the radios, and this causes problems during a contest such as tomorrow I have spent some time looking