Thanks for snappy reply to KAT2 troubles.
Started on your presumption that connection to dummy load was unstable or non
exsisting. It wasn't.
Was about to take ATU apart for a rewinding of T1 but --
quickly decided to check the K2 in its original condition.
Disconnected J7 and J8 + removed ATU
Hans,
You will have to remove the connector from P6 - the K2 still thinks the
KAT2 is connected.
If you installed all 10 pins as instructed, it will be tight. Try
prying it up bit by bit with a small screwdriver.
The 320 ohms on the collectors of Q7 and Q8 indicate that the PA
transistors
2 matches
Mail list logo
