Guy goes into Home Depot to buy some wire.
"What size wire?"
'Uh, #14, I think."
"How long?"
"Uh...a long time. We're building a house."
Sorry.Eric KE6US
On 11/4/2019 9:05 PM, Jim Brown wrote:
On 11/4/2019 8:49 PM, Holger Doerschel wrote:
drops at 100 W / 28 MHz to 12.2 V.
What
On 11/4/2019 8:49 PM, Holger Doerschel wrote:
drops at 100 W / 28 MHz to 12.2 V.
What size wire? How long?
73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Dear Don,
I read at the K2 13.6 V. It is a Powerwerx PS from Elecraft with the two
Powerpole connectors at the front. The Voltage drops at 100 W / 28 MHz
to 12.2 V. I already replaced D16. No change. I tried several PS.
73,
Holger DL9HDA
On 05.11.19 02:46, Don Wilhelm wrote:
Holger,
Holger,
Is your power supply voltage at 13.8 volts or better yet 14.3 volts?
That should be as measured by the voltage display on the K2. It should
not drop below 12.7 volts during a 100 watt transmit.
Part of the problem may be attributed to the voltage vs. frequency curve
of KPA100 D16 -
Hi,
after I finally installed the KAF2 module in my K2/100 05775, it was
time to do a complete alignment and I ran into this old problem again.
The output power at 160 m is 100 W. And drops from band to band to 80 W.
Now I have adjusted the KPA100 to 10m. Now I have there 100 W but then
on
5 matches
Mail list logo