[Elecraft] K2: Dial calibration question

My new K2/100 is working well, so I decided to do a complete realignment and button it up. I set up the reference oscillator using Spectrogram and EA3ADV's method. Using 10MHz WWV (and a couple of iterations), I managed to get the frequency to read within 10Hz on 10MHz WWV and 5Mhz WWV and

Re: [Elecraft] K2 Dial Calibration Question

Thanks Don. I downloaded your procedure and will go through it this week. Thanks again for your quick response. Fred -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Dial-Calibration-Question-tp7559958p7559990.html Sent from the Elecraft mailing list archive at

[Elecraft] K2 Dial Calibration Question

I have noticed that my K2 dial calibration seems to match my ICOM 756 Pro III for all CW stations. However, when I compare signals SSB signals the K2 seems to be off by about 200 cycles. Is this a dial calibration issue or something related to the filters? I had not noticed this until I

Re: [Elecraft] K2 Dial Calibration Question

Fred, It could be either the VFO or the filters or both. Go to my webpage www.w3fpr.com and follow the instructions in the K2 Dial Calibration article. That should line everything up quite nicely (within 20 or 30 Hz anyway). 73, Don W3FPR On 7/28/2012 6:30 PM, KC9QQ wrote: I have noticed