I have in my possession a K2 that has developed a fault with
the encoder.
When trying to tune the radio, rotating the encoder results in just
the last digit displayed flickering back and forth.
At first I thought the Optical encoder had failed and so ordered a
replacement from Elecraft which
Nidge,
It is difficult to predice the exact voltage levels that will be present
in digital signals at any particular time. That may be why the U3
redings may be off from what is listed in the manual. Check by
comparison instead.
Compare the voltage at FP U3 pin 14 with the voltage your meter
: Thursday, April 08, 2010 9:17 PM
Subject: Re: [Elecraft] K2 VFO / Encoder Problem
Nidge,
It is difficult to predice the exact voltage levels that will be present
in digital signals at any particular time. That may be why the U3
redings may be off from what is listed in the manual. Check
Nidge,
Yes, from that I would surmise that U3 pin 14 is damaged - however,
check the ENC A and ENC B lines for continuity to the microprocessor
just to be sure there is nothing wrong there.
73,
Don W3FPR
Nigel (Nidge) Smith wrote:
Hi Don,
Many thanks for the quick reply.
So far the
: [Elecraft] K2 VFO / Encoder Problem
Nidge,
Yes, from that I would surmise that U3 pin 14 is damaged - however,
check the ENC A and ENC B lines for continuity to the microprocessor
just to be sure there is nothing wrong there.
73,
Don W3FPR
Nigel (Nidge) Smith wrote:
Hi Don,
Many thanks
5 matches
Mail list logo