I think my problem is with fldigi. I tried using cocoaModem, and
it shows audio up to 4.2 KHz when I follow Joe's technique of
setting the knobs to SHIFT/WIDTH, the SHIFT to 2.20 and the
WIDTH to 4.00. Sorry for the bandwidth.
73 Bill AE6JV
On 5/12/16 at 3:28 PM, li...@subich.com (Joe
I don't know what's going on elsewhere but with FW 5.38 and the
KFL3B-FM I regularly get 4 KHz bandwidth (10 - 4000 Hz, or 200 -
4200 Hz) on the waterfall in WSJT-X or an audio spectrum analyzer
(e.g., Spectran, Spectrum Lab, etc.) in either SSB (LSB/USB) or
DATA (DATA A and AFSK A) modes using
I was referring to SSB mode, Bill. Not sure if this extends to DATA A mode,
yet, but I'll investigate.
Wayne
N6KR
On May 12, 2016, at 1:11 PM, Bill Frantz wrote:
> I guess I'm just not getting it. I am in DATA A mode with the 13KHz FM filter
> automatically selected.
I guess I'm just not getting it. I am in DATA A mode with the
13KHz FM filter automatically selected. Following Wayne's
directions, I put the bandwidth controls into Lo/Hi mode and
hold NORM to normalize the passband. I then turn the Hi knob to
max (4.00 shows) and the Lo know to minimum (0.00
On 5/12/2016 3:07 PM, Bill Frantz wrote:
While working in this part of the firmware, could 4K receive passband be
made to work with the 13KHz FM filter as well?
4 KHz receive passband *already works* with the FM filter. Simply set
FC (shift) = 2.0 - 2.2 and dial in the desired bandwidth.
While working in this part of the firmware, could 4K receive
passband be made to work with the 13KHz FM filter as well?
Thanks, Bill AE6JV
On 5/12/16 at 10:03 AM, n...@elecraft.com (Wayne Burdick) wrote:
The K3's SSB receive passband can be widened to as much as 4.0
kHz if you have a 6.0 kHz
Hi all,
The K3's SSB receive passband can be widened to as much as 4.0 kHz if you have
a 6.0 kHz crystal filter. This is useful for ESSB in particular. However,
there's a minor problem with the present firmware that requires a workaround
(for now).
The trick is that you have to have LO/HI CUT
7 matches
Mail list logo