Earlier this morning I was operating JT65 with no problems.
Left the rig alone; worked on other computer; left the house for a while
and when I returned, I tried to transmit using JT65; using CW and
pressing the front=panel XMIT.
In all cases the main Display of the K3 shows 0 W.
Checking
I have learned from Elecraft that this may be indicative of two blown
FET's in the 10w amp stage inside the K3.
gremlins abound. And all while I was away doing chores outside. Since I
had the dogs with me it must have been the inside cats!
--
Bob KD7YZ
http://www.qrz.com/db/KD7YZ
Bob,
You say in CW, did you mean to say Data A mode on the K3, which is what you
need for JT65.
Zero output would be what you get if in CW mode and ptt on, with an audio input
type data mode.
Just a thought
73. John. N3WT
On Jan 17, 2014, at 11:48 AM, Bob KD7YZ kd...@denstarfarm.us wrote:
the signal to that point!
Now I'm a little less paranoid and make sure the TMP connectors are firmly
pressed home.
73
George
AI4VZ
-Original Message-
From: Bob KD7YZ
Sent: Friday, January 17, 2014 1:44 PM
To: K3 List
Subject: Re: [Elecraft] K3: XMIT produces Display 0 W suddenly
I have
4 matches
Mail list logo
