I have a CW paddle with an IR wireless transmitter (Palm Paddle from Palm Radio) and it works great with the K2. Palm radio provides a manual where to solder the wires to the K2. I would like to add the reveiver also to my K3. I need the pins for paddle right, paddle left, ground and VCC (everything from 5-15V is ok for the receiver) Link to the product is here: http://www.palm-radio.de/english/english.html It would be nice if everything could be soldered to the downside of the main board of the K3 like in the K2. Maybe one of you can read circuit diagrams better than me and can give me a hint where are the best solder point to attach the wires.
thanks in advance, 73! de Werner OE9FWV -- Veni, Vedi, Visa: I came. I saw. I shopped. Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 5522 75013 15 Mobile +43 664 6340014 Elecraft K2 #5203 K3 #656 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html