[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N2TK,
Tony
Sent: Thursday, February 11, 2016 7:04 PM
To: w3...@embarqmail.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - KIO3B setup
Hi Don,
When I moved the USB cable to the front of the PC I get the following in
Device Manager.
two USB ports
ursday, February 11, 2016 5:32 PM
To: N2TK, Tony <tony....@verizon.net>; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - KIO3B setup
Tony,
The USB "adapter" in the K3 must be defined as a USB COM port by your
computer. It should be no different than adding a USB to serial ad
Tony,
The USB "adapter" in the K3 must be defined as a USB COM port by your
computer. It should be no different than adding a USB to serial adapter
(because that is what is inside the KIO3B). I suspect that "USB
Composite Device" is what you might be looking for - is there a COM Port
ore as there is nothing showing
on LP-Bridge how to handle USB connections?
Tnx for any input.
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N2TK,
Tony
Sent: Monday, January 18, 2016 4:25 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 - KI
Well, first, I don’ recognize the CBLP3T cable. Maybe you meant CBLP3Y? If so,
I think yu would still need a DE-9 “Y” cable to connect at the P3 at which ever
port you used before (TXCVR or PC).
Be sure to set CONFIG:RS-232 to USB and not 38400 as before. And now your
audio input/output is
I installed the KIO3B kit. I have it set up as the original KIO3 - K3- RS232
to P3 to PC/SteppIR. Accessory plug with FSK interface and audio in and out
cables to audio board. I use LP-Bridge. Everything is working fine as it was
before the upgrade.
Now I want to take advantage of the features of
6 matches
Mail list logo
