Again, thanks for the helpful replies. For anyone in the future following this thread for an answer.
As was directed, the answer for my situation was in setting the K3 CONFIG PTT--KEY to OFF-rts. Also, engaging the CW/other option in the N1MM and RTS to CW changed from always off, in the N1MM port configuration. The help was so appreciated and it will help me to have I'm sure, even more fun in the contests. I type like a big dumb ape and much prefer to send CW with my Begali Sculpture but in a contest where accuracy is important for both sides of the Q and the ability to use the F-key macros, this will definitely make me a more effective contester. And a less fatigued one at that... Again, thanks for the replies, all who steered me to the exact same resolution. 73, Gary KA1J > Thanks for the replies on & off list. > > I've tried to follow the documentation on the N1MM site and thus far > I haven't been able to get any communication from the memories to the > K3. I only have one COM port on the computer and though I checked > that in the config setup to also be for CW, I'm guessing I may need > another COM port as the pictorial shows three ports available with > one of them for the radio and another for CW. If that's the case, > I'll likely need a different computer as this one is a HP slimline > and is very limited in what it can do and like a inexpensive laptop, > hardware can not be added to it. > > I don't want this topic to become what some will consider an off > topic thread as many here likely don't use N1MM with their K3 so > please send your comments direct to me. > > If there is a good link for setting up the K3 with N1MM, I'd like to > know about it, I Google search found one for how to do this with the > Flex but that's not Elecraft. > > Thanks & 73, > > Gary > KA1J > > > When I contest I use N1MM, use the memories on the K3 and send with > > the key when needed & I'm busy as a one arm paper hanger doing it > > this way. I'd like to just use the keyboard, use N1MM to the fullest > > and use the paddles only when needed. > > > > What's an affordable & simple method of getting the keyboard to work > > with N1MM & the K3? > > > > Thanks & 73, > > > > Gary > > KA1J > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to g...@ka1j.com > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g...@ka1j.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com