Re: [Elecraft] K3 KXV3-RXA Mod

Thanks for the replies - and Don, I'll leave it in until I next open the rig _ I haven't noticed any detriment - but there is no point in having them both in. 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3-KXV3-RXA-Mod-tp4873179p4876689.html Sent from the [K3]

[Elecraft] K3 KXV3-RXA Mod

Hello, On my old KXV3 I installed a small PCB with sticky tape. It was an original Elecraft mod. As far as I know this mod was installed to improve isolation of the receive antenna on the original KXV3 board. Now I'm installing the KXV3A board I have the next question: Do I have to

Re: [Elecraft] K3 KXV3-RXA Mod

Evert, It has been incorporated into the board. Your mod PCB will not be needed. 73, Don W3FPR Evert Bakker (PA2KW) wrote: Do I have to install this RXA mod pcb on the new KXV3A board? __ Elecraft mailing list Home:

Re: [Elecraft] K3 KXV3-RXA Mod

weelll I got the new 'a' version AND installed the sticky tape mod is that a problem? thanks 73 John VE3NFK -- View this message in context: http://n2.nabble.com/K3-KXV3-RXA-Mod-tp4873179p4874835.html Sent from the [K3] mailing list archive at Nabble.com.

Re: [Elecraft] K3 KXV3-RXA Mod

John, I guess you have double protection :-) . Actually I don't think that is a benefit, and may be a deficit, so I would remove the 'sticky tape mod'. 73, Don W3FPR VE3NFK wrote: weelll I got the new 'a' version AND installed the sticky tape mod is that a problem? thanks 73