Hi Bill,
this is exactly what I wanted to hear :)
As I mentioned already I have just only excellent experiences with Elecraft
service guys and their effort etc. till now so I was a bit surprised. So I
am happy to hear that it is nothing related to Elecraft guys.
I am really looking forward to
Please do not get the wrong impression of Elecraft service. I
assembled my K3 from a kit and I have been the only one who has
worked on it. If it is a problem with the workmanship, I'm the
one to blame.
73 Bill AE6JV
On 6/17/15 at 2:10 AM, indi...@xsmail.com (ok1rp) wrote:
You would like
Bill,
Be careful with Loctite on small screws; you may never get them loose
without heating them.
A better solution is to use clear nail polish on the head.
Don't ask how I know!
73 George AI4VZ
-Original Message-
From: Bill Frantz
... If the radio is going to be used in a high
It's always nice to see Lisa Jones on the return address of a
package. In my case, the package had the new synth and the
internal antenna tuner. I installed them together with no
problems, but I noticed that many of the screws on the outside
of the K3 were loose. I distinctly remember
Bill,
You would like to say that many of the screws on the outside of the K3 were
loose during service works at Elecraft? I am a bit worrying in that case as
my radio is coming back to home also and the placing and enough tightening
all the screws is mandatory to keep down the internal noise as
Recently, I moved my K3 to work with cables behind it, and noted that 2 of
the small case screws had fallen out and were on the desktop. Prior to
this, the radio had not been moved for at least a year. Anyone else notice
this issue?
Barry W2UP
--
View this message in context:
: [Elecraft] [K3} Screws falling out
Recently, I moved my K3 to work with cables behind it, and noted that 2 of
the small case screws had fallen out and were on the desktop. Prior to
this, the radio had not been moved for at least a year. Anyone else notice
this issue?
Barry W2UP
--
View this message
Hi,
Has anyone else noticed the screws that hold the K3 case together appear to
rust over time?
Not a show stopper but they do look a little sad one year on.
Yes I could drop some black hobby enamel paint on them but this seems a little
odd to me that after just one of owning the radio now
@mailman.qth.net
Sent: Monday, May 11, 2009 3:41 PM
Subject: [Elecraft] K3 screws
Hi,
Has anyone else noticed the screws that hold the K3 case together appear to
rust over time?
Not a show stopper but they do look a little sad one year on.
Yes I could drop some black hobby enamel paint on them
Black Permanent Felt-Tip Pen
73 de M0XDF, K3 #174
--
The high minded man must care more for the truth than for what people
think. -Aristotle, philosopher (384-322 BCE)
On 12 May 2009, at 00:14, Erik N Basilier wrote:
I have not noticed any rust (haven't had the K3 outside the home).
, May 11, 2009 7:14 PM
Subject: Re: [Elecraft] K3 screws
I have not noticed any rust (haven't had the K3 outside the home). However,
when I put the case back together after recent hardware mod's and second rx
installation, I had a couple of cases where the conical part of the screw
head first
11 matches
Mail list logo
