Set CONFIG:SPKRS=2. Same audio comes out of both external speakers. AFX makes
some effects that can be less tiring.
73,
Brian, K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Press the button marked AFX. Otherwise there is no audio on the right channel
without the Sub-Rec.
Sent from my iPhone
...nr4c. bill
> On Sep 4, 2020, at 10:08 AM, Tom Muller wrote:
>
> Searched the archive however can't find info for speakers set to 2 and no
> sub receiver. Yesterday I
Searched the archive however can't find info for speakers set to 2 and no
sub receiver. Yesterday I got audio from both speakers, and today only one
side is working. I have the correct adaptor and speakers are 8 Ohms
unamplified. Everything checks good on the bench. Could something be wrong
in the
Ditto on the West Mountain Radio COMspkr. Ordered a pair after reading
reviews here on the forum and after installation, it took about 5 seconds to
hear the difference over my computer speakers. My other speakers had RFI on
certain bands, but these have no RFI on all the HF bands with the KPA500
I am thinking of purchasing the Bose Companion 2 Series II Multimedia
Speakers for my K3. Is anyone using them and how good do they work? Is there
any RF getting into the speakers?
My best to all.
Regards,
John W9QP
__
Elecraft
John,
FWIW, my West Mountain Radio COMspkr set totally free of interference.
The unit with the amp is immediately beside a 1KW amp and the antenna
cables for several rigs pass within inches behind the unit(s).
73! de Ken Kopp - K0PP
__
I also have the West Mountain Radio COMspkr and agree it is absolutely clear
and free of interference. If I turn on my external computer speakers (creature
speakers hooked to my iMac) then I can hear a loud buzz whenever I key down
from those creature speakers but absolutely nothing from the
On 1/5/2012 8:38 AM, Rose wrote:
FWIW, my West Mountain Radio COMspkr set totally free of interference.
The unit with the amp is immediately beside a 1KW amp and the antenna
cables for several rigs pass within inches behind the unit(s).
What matters for RFI is proximity to ANTENNAS, not rigs,
99.9% of all powered speakers suffer from RFI, including those from
pro audio companies. It's good to hear that these do not.
The odd thing is that the COMSpkr appears to be the same device as many
of the generic computer speakers *except* the bypass/RFI suppression
parts included on the chip
On 1/5/2012 9:26 AM, Joe Subich, W4TV wrote:
The odd thing is that the COMSpkr appears to be the same device as many
of the generic computer speakers*except* the bypass/RFI suppression
parts included on the chip makers reference design are present in the
West Mountain Radio product but are
Thanks for all the responses, I have ordered the West Mountain ComSpkrs
since they were so highly recommended. I appreciated the comments and
suggestions.
Regards,
John W9QP
__
Elecraft mailing list
Home:
From memory, (ie the regs changed I should check first) over here in Eu we
have working place regulation set at 85dBA as a maximum for continuous 8
hours listening environment, but it is advised (not mandatory till another
3dB) to use some kind of ear protection; then 88dBA for 4 hours, 91dBA
efficient speakers.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Rodgers
Sent: Sunday, December 19, 2010 9:15 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 external speakers
Ok, one more question. I run some
On 12/21/2010 10:11 AM, George A. Thornton wrote:
Amplified computer speakers have been a problem for me. They are not
well screened for RF and on occasion I have had bad feedback problems.
Yes, amplified loudspeakers (that is, speakers with built-in amplifiers)
are notorious for serious RFI
I use a pair of amplified Labtec computer speakers
with my K3's rear Stereo speaker output
I like the ability to either listen on headphones and speakers
or turn down the speakers and have a quieter room using the cans
although I did have some rfi initially
it was getting in from the little wall
Ok, one more question. I run some external equipment in the external speaker
line with a mono plug and a mono speaker. I should be able to use that from k3
external speaker set to 2 with a stereo to mono adapter right?
I also have a set of computer speakers I can run on line out. I wonder if
Tom Hammond-2 wrote:
I personally prefer UNamplified Motorola Mobile speakers, available
regularly
on EBay for $10 or less.
I have a pair of passive speakers that look very like those though they may
not be made by Motorola, but they are a bit lacking in bass for my liking
and I prefer
I use the Sounds Sweet. It has gotten a bit pricey but it has the
advantage of cutting down on the high frequencies. This helps the noisy
receiver issues that occupied so much bandwidth over the past few days.
(Please do
not take this as an invitation to beat that dead horse any more!)
I have had these Best Buy speaker since Dec 1, small and sound great.
Am very pleased with them
73, Ty, K3 696
--- On Sat, 4/4/09, Jay Rodaman k2...@optonline.net wrote:
From: Jay Rodaman k2...@optonline.net
Subject: Re: [Elecraft] K3 external speakers
To: elecraft@mailman.qth.net
Date
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Saturday, April 04, 2009 12:18 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 external speakers
The following may well be obvious to most, but I know of at least three K3
owners who've been
to work quite well
Jay
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Saturday, April 04, 2009 2:18 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 external speakers
The following may well be obvious
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Saturday, April 04, 2009 12:18 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 external speakers
The following may well be obvious to most, but I know of at least three K3
owners who've been caught
of most of us
and seem to work quite well
Jay
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Kopp
Sent: Saturday, April 04, 2009 2:18 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 external speakers
The following
The AF Output mod had been made to (at least) two of the
K3's that suffered the audio output IC failure, mine included.
Perhaps the mod only helps and that's why the problem took
months to come to failure. My board is slightly scorched, and
the IC burned up on another board.
The audio IC is
I use an external speaker on my K3. (Sounds Sweet speaker switch between
radios via an iplus by W2IHY)
I don't us an amp with the K3 but I do use an amp with my other radios.
(Orion II, Omni VII, Jupiter)
I do sometimes get a little RF into my small stereo speaker system of which
I use to
I guess I missed the word active. I was worried about the af amp in the
K3
(Note to self: Re-read twice before responding to list)
Frankie
K3/10 1688
just plug it to external Speaker, enable 2 Speakers in the setup Menu
. but do not use an linear-hf-amplifier
I just picked up a set of Cyber Acoustics amplified speakers (stereo) Model
CA-2012 at my local Fry's Electronics. Cost was just $10. These speakers
sound great, and look great set-up on either side of my K3. There is even a
headphone jack on the right speaker, which also works great. And no
Does anyone know the impedance range of the external speakers for the K3? I
have looked and can't find it in the specs...no doubt I've overlooked
something that is obvious.
Larry
wd4mbe
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
Does anyone know the impedance range of the external speakers for the K3?
4 ohms to 16 ohms ought to work fine. 4 ohms will give you the loudest
audio since the amplifier is having to work directly from the 12V supply.
73,
Lyle KK7P
___
Elecraft
Johnson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 27, 2007 9:12 PM
To: Larry Maguire
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] k3- external speakers
Does anyone know the impedance range of the external speakers for the K3?
4 ohms to 16 ohms ought to work fine. 4 ohms
30 matches
Mail list logo
