Make sure you only have ONE PTT operating.
Sent from my iPhone
...nr4c. bill
> On Aug 14, 2017, at 5:07 PM, Gene O wrote:
>
> Recently rearranged the operating position in my shack. Now when operating
> JT65 or F8 I can activate transmit button but it "motorboats" when I
Recently rearranged the operating position in my shack. Now when
operating JT65 or F8 I can activate transmit button but it "motorboats"
when I try to turn it off. I need to hit the XMIT button to turn it
off. I must have a cable in the wrong position. Can anyone point me in
the right
The latest version of the K3 firmware (4.48) has eased that problem for me
and HRD. The problem has been on the todo list for HRD for a long time,
hopefully they will fix it before they switch to charging for HRD.
73 John K3TN
--
View this message in context:
I have seen this topic posted but I guess I missed the corrective measure(s).
My K3 has the latest update and the AGC still just turns off for no reason,
even when it is just sitting there in receive mode. Yes we are using HRD and
the version we have is 5.11 build 3209.
Any additional feedback
Bill,
When it comes out in the next couple of days, download the 5.2x version of
HRD. It should resolve this issue. If not, the new owners of HRD plan to
have it corrected in v6.0, which comes out the week of Dayton.
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3
Bill
If you install Lpbridge which is a port sharing utility which sits between
the K3 and up to 5 applications wanting to communicate with the radio, then
the problem will disappear! It looks daunting to set up, but in reality
it's easy. Problem solved!
73 Stephen G4SJP
On 30 April 2012
He said right at the start that that mod had been done Brett.
73 Ian
On 28 April 2010 22:43, Brett Howard br...@livecomputers.com wrote:
Or you may need to perform the mod that fixes this issue...
http://www.elecraft.com/K3/mods/KPA3_12V_Sense_Modification_Rev_B.pdf
~Brett
On Wed, Apr
Thanks to all that replied...I removed the ACC/RS232 PCB and cleaned the
pins...
All works OK now
Thanks again
Glenn
VK4FZ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-not-turning-off-tp4972515p4979131.html
Sent from the [K3] mailing list archive at Nabble.com.
not turning off
To: elecraft@mailman.qth.net
Message-ID: 1272455717487-4974007.p...@n2.nabble.com
Content-Type: text/plain; charset=us-ascii
Glenn VK4FZ wrote:
My K3 (S/N 544) is no longer turning off properlythe 12v sense mod is
done, any ideas for further investigation
I'd next
), does the radio shut down reliably?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of JohnK1JD
Sent: Thursday, April 29, 2010 5:02 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 not turning off
Bill
I suspect
Glenn VK4FZ wrote:
My K3 (S/N 544) is no longer turning off properlythe 12v sense mod is
done, any ideas for further investigation
I'd next try the remote Power Off command (PS0) via the K3 Utility. If that
works and the power switch does not, then you might have a defective
Or you may need to perform the mod that fixes this issue...
http://www.elecraft.com/K3/mods/KPA3_12V_Sense_Modification_Rev_B.pdf
~Brett
On Wed, Apr 28, 2010 at 4:55 AM, Bill W4ZV btipp...@alum.mit.edu wrote:
Glenn VK4FZ wrote:
My K3 (S/N 544) is no longer turning off properlythe 12v
My K3 (S/N 544) is no longer turning off properlythe 12v sense mod is
done, any ideas for further investigation
Thanks,
Glenn
VK4FZ
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-not-turning-off-tp4972515p4972515.html
Sent from the Elecraft mailing list archive
My K3 will no longer turn off. The LEDs on the front panel won't go
off, and all the
lettering on the Liquid Crystal Display will disappear but the LCD will
still be backlit.
I've traced it down to the 15pin accessory plug; all I have attached to
it is a 1 transistor
keying circuit to key FSK
My K3 will no longer turn off. The LEDs on the front panel
won't go off, and all the lettering on the Liquid Crystal
Display will disappear but the LCD will still be backlit.
I've traced it down to the 15pin accessory plug; all I have
attached to it is a 1 transistor keying circuit to
15 matches
Mail list logo