AC7AC
>
> -Original Message-
> From: Ron D'Eau Claire [mailto:r...@cobi.biz]
> Sent: Sunday, July 17, 2016 2:40 PM
> To: 'Leroy Buller'; 'donw...@embarqmail.com'
> Cc: 'elecraft@mailman.qth.net'
> Subject: RE: [Elecraft] K3 power oddity
>
> Lee - that is true with man
To: 'Leroy Buller'; 'donw...@embarqmail.com'
Cc: 'elecraft@mailman.qth.net'
Subject: RE: [Elecraft] K3 power oddity
Lee - that is true with many radios. The K3/K3S was designed so that ALC
action starts at 8 bars. More info is in the K3S Owner's manual under "Mic
Gain and Compression Settings&quo
Running at reduced power for RTTY is probably a good idea. My TS-570
died in the middle of a RTTY contact at 100 W. and as bad as that was,
I'd hate to think of it happening to a K3!
Bob, N7XY
On 7/17/16 7:24 AM, George Kidder wrote:
Thanks Don for the explanation of what is going on with
an.qth.net] On Behalf Of Leroy
Buller
Sent: Sunday, July 17, 2016 1:04 PM
To: donw...@embarqmail.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 power oddity
Don...
Thanks for the information. I will check that out. I was told a long time
ago by that elusive "someone" to keep the K3
Don...
Thanks for the information. I will check that out. I was told a long time
ago by that elusive "someone" to keep the K3 linear that the ALC meter
should just flicker. Obviously, that was bogus advice. I will check this
out yet today.
Thanks
Lee
On Sun, Jul 17, 2016 at 8:19 AM, Don
Thanks Don for the explanation of what is going on with the "ALC" meter.
I have two suggestions relative to using my K3/100. The first is a
suggestion I made by email some years ago, with no reply. When changing
from "Spkr + Phones" to "Phones" ( that is, spkr off) I need differing
audio
Thanks Don! I suspected as much, but a little disconcerting first time
around.
Mike - W0AG
On Sun, Jul 17, 2016 at 8:19 AM, Don Wilhelm wrote:
> Lee (and others)
>
> It is normal for the power control circuits to be reset after a band
> change. That prevents overshoot
Lee (and others)
It is normal for the power control circuits to be reset after a band
change. That prevents overshoot if you are driving an amplifier.
Normally the power will come up to the requested power level in a couple
dot times on CW, or several syllables when operating voice.
If the
Have you got enough audio level going in to drive the ALC meter up to 4.5 bars?
73 from David GM4JJJ
> On 17 Jul 2016, at 13:38, Leroy Buller wrote:
>
> Operated RTTY NAQP this weekend. When changing bands, I noticed my power
> would drop to 40 watts or so. After
I noticed the same thing with my K3. I tried reconfiguring the sound setup
(I'm using AFSK) thinking that I had screwed something up, but still did
the same thing.
Mike W0AG
On Jul 17, 2016 7:39 AM, "Leroy Buller" wrote:
> Operated RTTY NAQP this weekend. When changing
Operated RTTY NAQP this weekend. When changing bands, I noticed my power
would drop to 40 watts or so. After several transmissions, it would rise
to 100 watts. I don't think this is normal. All antennas are matched.
Comments?
Lee
11 matches
Mail list logo